Gear Hunter

IK Multimedia - IRIG PRO DUO

Description

True mobility meets professional audio

iRig Pro DUO is the first two-channel interface designed to let you record anywhere, on any device, with the same sound quality you'd enjoy in the studio. Connect directly to your iPhone, iPad, Android device, or Mac/PC with the included cables (no adaptors required). Powered by batteries or your laptop's USB port, iRig Pro DUO offers all the features you need in an incredibly compact, portable package.

Features:

* Truly mobile dual input audio interface for iPhone, iPad, Android, Mac and PC
* Simultaneous dual track recording interface for all instruments
* Ultra-compact housing for extreme portability
* Dual identical XLR/TRS combo input jacks
* Dual ultra-low noise studio-quality IK preamps
* Individual input gain controls
* 48V phantom power
* Self-powered (2 AA batteries), device powered or DC power adapter (not included)
* 24-bit AD-DA converters
* Dual 1/4" switchable TRS balanced outs
* 1/8" 3.5mm Headphone out w/ level control
* MIDI IN/OUT jacks
* Ultra-compact housing fits in the palm of your hand
* Comes with mini-DIN to Lighting, Micro USB OTG and standard * USB cables
* Designed and made in Italy

Lightweight and mobile

iRig Pro DUO is the smallest full-featured dual-channel interface on the market. Its elegantly designed lightweight thermoplastic housing is designed to take the rigors of life on the road, session after session. It fits easily into the palm of you hand and can fit in any backpack, gig bag or even your pocket.

Dual-channel recording

Both powerful and connectible, the iRig Pro DUO features 2 channels with XLR/TRS combo audio jacks and phantom power that can accommodate everything from high-end phantom powered condenser microphones to guitars, basses, keyboards and more. Each channel has it's own input gain control so you can dial in the perfect amount of input signal for your recording.

Studio sound

Each of iRig Pro DUO's two channels passes through an ultra-low noise high-headroom pro-quality preamp that then runs through a 24bit AD-DA converter, giving you amazing clarity and pristine studio-quality sound.

With iRig Pro DUO, you can also hook up your favorite MIDI controllers. This is thanks to its included TRS to MIDI-DIN cables and dedicated MIDI in/out jacks, so you can control MIDI-compatible software (or send MIDI data to MIDI-compatible hardware, like synthesizers, drum machines and samplers) with plug and play simplicity. It just works.

Studio mic ready

High-quality studio condenser microphones require 48V of external power to function. It's part of what makes them sound so good, crisp and accurate. With iRig Pro DUO, you'll have that 48V of phantom power at your fingertips. Just plug in your high-quality condenser mic, flip iRig Pro DUO's phantom power switch and record until your heart's content.

Monitoring & output

Monitoring your mixes and input is a breeze. iRig Pro DUO comes with two 1/4" TRS balanced analog audio outputs that let you send a zero-latency signal to your studio monitors or portable speakers. It is also an ideal audio interface for when you want to perform live and connect your gear directly to the stage audio system without having to use any special cables or problematic DI Boxes.

There's a Direct Monitor switch that lets you monitor either the direct incoming dry signals, or the processed signal returning from your device or computer. Plus, iRig Pro DUO has a high quality headphone amp with level control so you even monitor your recording and playback in real time with your favorite set of cans.


iRig Pro DUO Specifications:

MICROPHONE INPUT

Microphone Inputs: 2x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: approx 2 kOhms
Gain Range: 48 dB
Phantom Power: +48V 4V
Frequency Response:
* from 5 Hz to 21 kHz (-3dB) Gain @ min
* from 30 Hz to 21 kHz (-3dB) Gain @ max
Input Noise:
* -103 dB(A) Gain @ min
* -86 dB(A) Gain @ max

INSTRUMENT INPUT

Instrument Inputs: 2x unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response:
from 2 Hz to 21 kHz (-3dB) Gain @ min
from 5 Hz to 21 kHz (-3dB) Gain @ max
Input Noise:
-104 dB(A) Gain @ min
-102 dB(A) Gain @ max

LINE OUTPUT

Line Outputs: 2x balanced, TRS 1/4" Jack, Tip: hot / Ring: cold / Shield: ground
Floating Balanced Outputs with automatic level compensation when working in unbalanced mode
Maximum Output Level: +16 dBu into 600 Ohms balanced load
Instrument Input Impedance: 1 MOhms
Frequency Response: from 10 Hz to 21 kHz (-3dB)
Output Dynamic Range: 106 dB(A)
Output Impedance: 150 Ohms balanced

COMMON

AD and DA Resolution: 24-bit
Sampling Rate: 44.1 kHz and 48 kHz
Power: USB bus power, battery power (2xAA), or DC power supply (9VDC - 500mA min. positive outside - not included)
Metering: Multicolor LED
Size: 75mm/2.95" x 127mm/5" x 37mm/1.46"
Weight: 197.2g/6.96oz (batteries excluded)
Battery Life:
* Recording - Max load*: 3 hours, 30 minutes (NiMH rechargeable); 45 minutes (Alkaline)
* Playback - Min load**: 10 hours (NiMH rechargeable); 3 hours (Alkaline)

*Max load condition: both inputs connected to two 1,5mA phantom powered loads, input gains set to maximum, outputs set to maximum.
**Min load condition is as follow: music playing, phantom power OFF.

Package includes:

- iRig Pro DUO universal dual channel Audio-MIDI interface
- Lightning to Mini-DIN connection cable (60cm/23.62")
- Micro-USB-OTG to Micro-USB connection cable (60cm/23.62")
- USB to Mini-DIN connection cable (60cm/23.62")
- 2 x 2.5mm jack to MIDI cable (160cm/63")
- 2 x 1.5V AA Battery

Dimensions:

Size: 75mm/2.95" x 127mm/5" x 37mm/1.46"
Weight: 197.2g/6.96oz (batteries excluded)
Lightning to Mini-DIN connection cable: 60cm/23.62"
Micro-USB-OTG to Micro-USB connection cable: 60cm/23.62"
USB to Mini-DIN connection cable: 60cm/23.62"
2.5mm jack to MIDI cable: 160cm/63"

System Requirements:

iOS Devices

Compatible with iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s*, iPhone 4*, iPod touch 5th generation, iPod touch 4th generation*, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad 4th generation, iPad mini, iPad 3rd generation*, iPad 2*, iPad*. iOS 5.1 or later is required.

*30-pin to Mini-DIN cable (sold separately) is required

Computers

Mac: Mac OS X 10.6 or later. One free USB port.

Windows: Support using the ASIO4ALL driver on Windows XP/Vista/7/8. See our FAQ here for further details.

Android Devices

Compatible with Android devices that support Samsung Professional Audio technology, like the Samsung Galaxy S6, Galaxy S6 Edge, Galaxy Note 4 and Galaxy Note Edge. Samsung Galaxy S5 and Galaxy Note 3 require Android 5.

Compatible with Android devices with USB (OTG) connector running Android apps that use USB (OTG) audio input.

Compatible with any Android devices with USB (OTG) connector running Android 5.