Gear Hunter

Merging - IOC-HAPI

Description

Meet HAPI, the son of Horus. Born from the most flexible and sonically transparent audio interface and providing the same RAVENNA / AES67 connectivity as its father, HAPI is both the perfect primary interface for smaller systems as well as the ultimate accessory for a system using Horus where control room I/O is required. Able to carry the same AD8D/AD8DP and DA8/DA8P analog cards that fit in the Horus option slots and connect to any RAVENNA or AES67 network, the HAPI provides a more cost effective solution than the Horus without having to make a single compromise in quality.

Control Room I/O for RAVENNA Studios
When Horus is doing the heavy lifting in the live room, let Hapi be the perfect complement to your RAVENNA or AES67 connected control room by providing pristine talkback and multichannel speaker outputs.

3rd Party Workstations Welcome
Mac or PC, users now have access to one of the most sonically impressive mic preamps and ADDA interfaces the audio industry has ever seen. Using dedicated RAVENNA/AES67 drivers, users of any software on either the Mac or PC platform are able to use Hapi as their I/O solution.

Small I/O Stage Box
For recording setups where smaller amounts of inputs or outputs are needed in a variety of locations around the room, Hapi provides a cost-effective solution with mind-blowing results.

The Ultimate Mastering Interface
With analog option cards that match a level of quality never heard of before (no pun intended) and one of the only converters ever to be known for "not having a sound at all", Hapi is able to provide just the right amount of I/O without pushing budgets too far.

Post-Production I/O
The perfect post interface has arrived. Just enough analog and digital I/O and a comprehensive set of referenced sync options including LTC/MTC and video reference, all connected using nothing more than a simple CAT5E/CAT6 cable. And, matched with the IRIS Networked Post System, Hapi provides a professional I/O solution for the truly networked post studio.

Installation AV with Ovation
Match the power of Merging's multichannel audio and show sequencer with Hapi units placed strategically around the installation to provide the ultimate flexibility in creative AV.

Key Features:
* 8x AES/EBU + 8x ADAT or 2x SPDIF
* Works from 44.1kHz to 192kHz (Premium up to DXD/DSD256)
* Signal routing from any input to any combination of outputs
* RAVENNA / AES67 Compatible
* Browser-based remote access using any web enabled device
* AC or DC power supply options
* Modular design for analog and additional Digital I/O
* Near-zero latency from in to out

Specifications:
* Case Material: Powder Coated Steel
* Front Panel Material: Brushed Aluminum
* Weight (excluding redundant PS): 4.5 kg / 10 lbs
* Dimensions (1U rack mounting): 483 x 320 x 44 mm
* Voltage (AC): 90V-260V, 47-63 Hz
* Voltage (DC): 10-14V
* Power Consumption (Max): less than 30 Watts
* Front Panel TFT size/resolution: OLED (160x128 px)

Headphone Monitor Jacks:
* Max output Level (Unbalanced) Load = 300 Ohms +14.5 dBu
* Output Impedance: 75 ohms
* Dynamic Range (A-weighted, typ): 112 dB
* THD+N (1 kHz) @ -2 dBFS: less than -100 dB (0.001 %)
* Gain Range (software controlled): -60 dB to +12 dB
* Gain Step/Precision: 1dB / +/- 0.05 dB

Connectors:
* "Sync" Cable (LTC/Video Ref/MIDI)
* D-Sub 15Pin
* LTC In & Out (via "Sync" Cable)
* Balanced XLR
* Video Reference In (via "Sync" Cable)
* BNC
* MTC (I/O via "Sync" Cable)
* 5-Pin DIN
* Word Clock Input (Switchable 75 ohm Termination)
* BNC, 0.5Vp-p min
* Word Clock Output (Zout = 35 ohms)
* BNC, 5Vp-p
* AES type/pinout DB-25 (Tascam Dig.)
* ADAT / SPDIF
* Heaphone Jack 1 & 2
* 6.3 mm(1/4")/3.5mm
* RAVENNA Primary / Secondary (GbE)
* RJ45