Gear Hunter

Yorkville Sound - NX10C-2

Description

With it's 12 inch profile and innovative "through hole" pole mount design, the NX10C-2 is the most versatile and compact professional PA cabinet ever. The innovative speaker stands "through-hole" design allows multiple NX10C-2 cabinets to be mounted on a single standard speaker stand in a vertical array for very high volume applications. When wider horizontal coverage is required the NX10C cabinets can be rotated about the axis of the pole while still maintaining full phase coherency. 360 degrees of coverage can be easily achieved.

Features
* 500 Watts (1200 Watts Peak)
* Coaxial 10-inch/1-inch
* NX10C-2's can be mounted under the light bars, saving valuable stage space.
* For side-wash monitor applications on tight stages, the NX10C-2 can be mounted under the front of house cabinets to provide a monitor signal that will be fully phase coherent with the front of house signal.
* Innovative custom rear mounted handle also functions as a tilt stand allowing the NX10C-2 to be used as a compact wide coverage floor monitor or center fill cabinet.
* Versatile inputs for mic or line level sources as well as an 1/8-inch TRS jack allow the NX10C-2 to direct connect to any audio source.
* Made in Canada

Specifications
Active or Passive: Active
Program Power (Watts): 500 Watts (1200 Watts Peak)
Biampable: Self Powered
Max SPL (dB): 127dB Peak (124dB Continuous)
Frequency Response (Hz +/- 3dB): 80Hz - 20kHz
Crossover Frequency (Hz): 2500Hz
Driver Configuration: Coaxial 10-inch/1-inch
HF Driver(s): 1-inch Throat, Ceramic Magnet, 1.4 inch PETP Film
60 x 60
LF Driver(s): 10-inch Ceramic Magnet with a 2.5" voice coil
HF Amplifier Type: Class A/B
LF Amplifier Type: 3 Tier Class- H
Power Cable: Yes
Power Switch: Yes
Power Consumption (typ/max): 120 / 310 VA
Inputs: 3 (Combi-jack Mic Input / Combi-jack Line Input / 1/8-inch TRS Line Input) 1/4" inputs are parallel
Input Sensitivity (Vrms Sine): 1.23 Vrms, +4dBu
Mixer Controls: EQ (Playback/Bright)
Level Controls: Line/Mic
Limiter: Yes
LED Indicators: Power, Clip
Pole Mount Adapter (1 3/8"-3.5cm): Pole Through
Enclosure Materials: Injection Molded Fiber Reinforced ABS / Aluminum/13-ply birch
Grille: Perforated Steel
Dimensions (DWH x backW)): 13 x 13.5 x 12 inches / 33 x 34.3 x 30.5 cm
Weight (lbs/kg): 25 / 11.3