Gear Hunter

Neumann - KMS 105 MT

Description

The KMS 105 brings studio sound quality to the stage. Unlike usual stage microphones, which use dynamic capsules, the KMS 105 is equipped with a true condenser microphone capsule offering the superior clarity that made Neumann studio microphones famous all over the world. At the same time, the KMS 105 possesses the ruggedness required of a stage mic, thus refuting the myth that condenser microphones must be fragile. The KMS 105 can stand enormous sound pressure levels of up to 150 dB without clipping, and its tight, frequency-independent supercardioid pattern ensures high gain before feedback. The KMS 105 has a much smoother frequency response than dynamic microphones and an airy top-end. Compared to dynamic microphones, the Neumann KMS 105 has a vastly superior transient response resulting in a more immediate, more emotional vocal sound. In practical terms: effortless intelligibility, without the usual EQ boosts which further improves feedback resistance.

The KMS 105 is primarily designed as a handheld vocal microphone but can be used for other stage applications as well, due to its high SPL capability and wide dynamic range. Examples include percussion, saxophone, trumpet, trombone, harmonica, acoustic guitar, and guitar cabinets. Thanks to its superior sound quality, the KMS 105 is also an excellent microphone for home recording and broadcast applications. Because it is optimized for close mic placement, the KMS 105 will pick up a dry sound with very little ambience, which is a big advantage in untreated rooms.

Features
* Tight supercardioid pattern without off-axis coloration
* Unaffected by extreme sound pressure levels
* Rugged construction
* Feedback resistant
* Built-in pop screen
* Very low handling noise
* Includes SG 105 stand mount

Specifications
* Acoustical operating principle: Pressure gradient transducer
* Directional Pattern: Supercardioid
* Frequency Range: 20 Hz-20 kHz
* Rated Impedance: 50 ohms
* Rated load impedance: 1 kohms
* Maximum output voltage: 12 dBu
* Matching connector: XLR 3 F
* Weight: 300 g
* Diameter: 48 mm
* Length: 180 mm