Gear Hunter

ADJ Flat Par QA12X

Description

The Flat Par QA 12x from American DJ provides high quality RGBA lighting for your DJ and venue needs. With a true Amber LED the Flat Par QA 12x from American DJ will make any party shine a little bit brighter.

The Flat Par QA 12X from American DJ is a great compliment to your light setup. Sleek and low profile, this LED lighting setup will make sure your party always is rocking.

Smooth RGB color mixing as well as a true Amber LED give you great Orange and Amber color.

Featuring “low profile,” sideways power & DMX Ins/Outs and dual hanging brackets, the American DJ Flat Par QA 12X is a perfect match for mobile entertainers or permanent installation.

Make sure to pick up the optional ADJ LED RC2 Wirelesss Remote (Sold Separately) so that you can control this well built and durable unit from a distance.

Primary features include: 15 Color Macros, Electronic Dimming (0-100%), IEC AC IN and OUT on rear to daisy chain power and a 25-degree beam angle.

The Flat Par QA12X LEDs are rated at 50,000 hours, and only draws 80-Watts of power per fixture.

Flicker free and with an electronic dimmer the Flat Par QA 12X from American DJ will help make your DJ experience that much better.

Use the Color Strobe effect to bring out the best in your party.

Ultra bright slim fixture with 12x 5-Watt QUAD LEDs (4-in-1 RGBA- Red, Green, Blue & Amber)
Unique “sit flat” design – Power & DMX Ins/Outs are intelligently designed so the unit can be set flat on the ground or set inside truss
Great for performance stages where traditional par cans emit a lot of heat onto performers
Low profile case design
Wireless infrared remote control up to 15 ft./4.5M (Model: ADJ LED RC2 - sold separately)
8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channel modes
6 Operational modes: Manual Color Mode; Color Change Mode; Color Fade Mode; Auto (Program Run) Mode; Sound Active Mode and DMX-512 Mode
Smooth RGBA color mixing (fast or slow color change operation)
QUAD LED (4-in-1) projects no RGB shadows
15 built-in Color Macros
Color strobe effect
Flicker Free
Refresh Rate: 7.8KHz
Electronic Dimming: 0 - 100%
Beam angle: 25-degree
Linkable via 3-pin XLR cable (In/Out)
4-button LED DMX display on rear panel
Dual bracket yoke allows fixture to be hung or set on the ground
IEC AC IN/OUT outlets on rear to daisy chain power (up to 7 units)
Includes gel frame for optional diffusion filters
Run all night – No duty cycle
Long Life LEDs (50,000 hrs.)
Power Draw: 80W max
Multi-voltage operation: AC 100-240V, 50/60Hz (IEC power In/Out)
Dimensions (LxWxH): 13”x11”x4.5” / 328x280x115mm
Weight: 7 lbs. / 3.2 kg.
ETL approved