Gear Hunter

Analog Systems Eurorack Cabinet

Description

Here's a treat!

This is a solid Walnut case from Analogue Systems (AS) in the UK.

Originally, it was designed for AS modules which use a different power format than Eurorack.
The former power supply was removed to eventually add a Eurorack format power supply.
We've included 2 of the Malekko Power Supplies (pictured, combined value of $600), but you'll need to install them.

The rails are designed for M2.5 screws and not the more common M3 screws. Former owner had used some M3 screws. You may choose to do the same and bore out some of the holes a bit, or opt to replace with M3 rails.

12u in total. Approx 84hp per rack times 4 is 336hp in total minus the few hp for the Trunk Lines module.

One of the great features of this case is the included Trunk Lines module that feed signal outputs to the 1/4" outputs on the back so you can leave it permanently connect to speakers/recording that are hidden from view. Total of 10 outputs in all.

Current new price with the original AS power supply is approx $5000CDN