Gear Hunter
Rode - SVMX Stereo Video Mic
Description
Get unparalleled sound out of your video recordings. Featuring two separate 1/2-inch capsules, this stereo condenser captures premium audio in all settings.
The mic features a matched pair of 1/2" true-condenser capsules, configured in a stacked X-Y configuration, providing a highly-immersive soundscape. Each capsule is supported by the Rycote(R) Lyre(R) shock-mounting system, providing isolation from vibration as well as knocks and bumps.
For the very first time on any RODE microphone, the SVMX features integrated digital switching, allowing you to easily select any of the numerous built-in filters and settings with the confidence of LED indicators.
The RODE Stereo VideoMic X is the ultimate in stereo on-camera recording.
Features:
Acoustically Matched True Condenser Capsules
An acoustically matched pair of 1/2" externally biased, true condenser capsules provide studio-quality, immersive stereo sound.
RYCOTE LYRE Onboard Shock Mounting
Integrated single-piece thermoplastic shock mounting, designed to minimise handling noise at a capsule-level.
Heavy-Duty, Lightweight Aluminum Construction
Robust metal construction that only weighs 300g (10oz).
9V or Phantom Power (P48)
The Stereo VideoMic X can be powered by 9V battery (up to 30 hours), or via P48 phantom power using XLR connectivity.
Balanced Professional XLR Output
In addition to standard 3.5mm stereo output, the Stereo VideoMic X provides balanced output via the professional XLR standard (via miniXLR - not included).
High Frequency Boost
An innovative setting that will allow the Stereo VideoMic X to enhance its high-frequency sensitivity when using the included wind shield.
High Pass Filter
Three stage high-pass filter at 0/75/150Hz, to cut out any unwanted low frequency audio such as traffic noise and air conditioners.
Level Adjustment
Three stage level adjustment, offering a -10dB PAD for recording loud sound sources and a +20dB level boost to provide a cleaner audio signal to your camera/recording device.
Included POP Shield and Wind Shield
High quality environmental protection for both indoors and outside.
Specifications:
- Acoustic Principle: Pressure Gradient
- Active Electronics: JFET impedance converter
- Capsule: 0.50"
- Polar Pattern: Cardioid
- Address Type: End
- Frequency Range: 40Hz - 20kHz (selected HPF @ 0, 75Hz, 150Hz)
- Output Impedance: 200O
- Maximum SPL: 143dB SPL (@ 1kHz, 1% THD into 1KO load)
- Sensitivity: -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level: (A-weighted) 12dB-A
- Power Options: 9V Battery+48V phantom power
- Weight: 300gm
- Dimensions: (H x W x D) 102 x 118 x 100mm
- Output: Minijack OutputTRRS Output
- Warranty: 1 year with free extension to 10 years following registration
Weight, Dimensions, and Manufacturer Part Numbers
Base Item
Shipping Weight: 3 lbs
Shipping Dimensions: 9 x 9 x 5 in
Manufacturer Part Number (MPN): SVMX
Blemished
Shipping Weight: 4 lbs
Shipping Dimensions: 9 x 9 x 5 in
Manufacturer Part Number (MPN): SVMX
Warehouse Resealed
Shipping Weight: 4 lbs
Shipping Dimensions: 9 x 9 x 5 in
Manufacturer Part Number (MPN): SVMX
