Ibanez AZ Premium Electric Guitar - Blue Iceberg Gradation

Additional Photos:
AZ Oval C roasted maple 1pc neck
Heat-treated Maple is used for the AZ's neck construction. Its use increases the wood's stability, durability, water resistance and tolerance of temperature changes. The neck is sealed with an oil finish (sealer coat) which feels similar to a comfortable well-played guitar neck.
Neck Grip
In order to achieve supreme neck grip comfort, the fretboard edge is finished with a smooth curve that extends from the border between the fretboard and the neck, and then to the surface of the fretboard. The detailed neck shape is precisely carved using a ball mill for ultimate consistency. The width measurements of the fretboard are at 42mm at the nut and 56.4mm at the last fret. These dimensions allow for an easy grip in the lower register, and a more modern feel in the higher register.
Body Design
A shallow body back contour and a big forearm contour make the guitar body fit the player naturally, thus increasing playing comfort. The AZ body has a deep waist and different radii on each body edge curve (3 mmR on body top/8 mmR on body back), making it easier to play in both standing or sitting positions.
Seymour Duncan Hyperion Pickups
The custom pickup for the AZ was developed in collaboration with Seymour Duncan. The pickups feature a moderate output through Alnico-5 magnets to keep the clarity of the fundamental tone when using a distortion sound, and to deliver a clear pick attack. From treble to bass, and from high-E string to low-E string, the overall tonal balance is evenly adjusted, and works well with various effect pedals.
dyna-MIX 9 w/Alter switch
It offers nine sound variations, and can easily switch between humbucker and single coil modes with just the mini switch. One mode is even able to simulate a humbucker sound from the combination of the 2 single coil pickups.
Ibanez T1502 Tremolo Bridge (made by GOTOH )
Highly admired by many brands and players, the GOTOH 510 tremolo bridge has been improved upon and has become the new T1502 Bridge after collaboration between GOTOH and Ibanez. It features machined steel saddles and a die-cast zinc tremolo block for a quick response and improved articulation.
The 10.5mm string spacing allows for easy picking across strings, such as string skipping and hybrid picking. The snap and hold tremolo arm socket can makes it easy to load a tremolo arm, and the arm torque adjuster enables fine torque adjustment without any tools. The stud lock screws lock the stud bolts in place, for better tuning stability and resonance. The 2-point floating tremolo system allows for super smooth tremolo motion when either raising or lowering the pitch.
GOTOH H.A.P-M machine heads
The AZ comes with GOTOH MAGNUM LOCK machine heads, which have an established reputation for tuning stability. Its H. A. P (Height Adjustable Post). system allows for the adjustment of string posts for the appropriate tension of each string.
Specifications:
Neck type : AZ Oval C Roasted Maple 1pc neck
Body : Flamed Maple top/American Basswood body
Fretboard : Roasted Maple fretboard w/black dot inlay and Luminescent side dot inlay
Fret : Jumbo Stainless steel frets w/Premium fret edge treatment
Bridge : Ibanez T1502 bridge (made by Gotoh)
Neck pickup : Seymour Duncan Hyperion (S) neck pickup
Middle pickup : Seymour Duncan Hyperion (S) neck pickup
Bridge pickup : Seymour Duncan Hyperion (H) bridge pickup
Hardware colour : Chrome
Case/bag : Gig bag included
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.