dbx DriveRack PA - Speaker Control System

SKU: # 154183   |   Model: # DRIVERACK PA   |    Product Reviews0 Reviews  Write a Review

DriveRack PA - Speaker Control System
 This product is no longer available.
A fully integrated system that gets the most from your PA.
The dbx DriveRack PA Processor will give you gig after gig of crisp, clean sound. Delivers auto EQ; RTA; dual 28-band graphic EQ; feedback elimination; sub-harmonic synth; 2x3, 4, 5, or 6 crossover; limiter on the output stage; and presets matching the latest JBL speakers and Crown power amps. Wizard setup help.

The DriveRack PA provides state-of-the-art signal processing, while using a simple and intuitive user interface. This goal has been achieved by offering 2 independent channels of processing power with a linkable 28-band graphic equalizer, industry-standard dbx stereo compressor module, feedback eliminator and the 120A subharmonic synthesizer on the input, with a 6-channel output system that includes parametric EQs, and Peak Plus limiters (which are used to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system represent a methodical design that is guaranteed to deliver optimal all-inclusive processing in a completely scalable system.

dbx DriveRack PA Processor Specifications:

System Performance
Dynamic Range: 110dB A-weighted, >107 dB unweighted
THD N: 0.002% typical at 4dBu, 1kHz, 0dB input gain
Frequency Response: 20Hz - 20kHz, /- 0.5dB
Interchannel Crosstalk: >110dB min, 120dB typical
Crosstalk input to output: > 100dB
Delay: 10ms per channel (60 ms total)

A/D Performance
Type: dbx Type IV conversion system
Dynamic Range: line 110dB A-weighted; 107 dB unweighted
Type IV dynamic range 123 dB with transient material, unweighted, 22kHz BW
121 dB with transient material, unweighted, 22kHz BW
115 dB typical with program material, A-weighted, 22kHz BW
Sample Rate: 48kHz

D/A Performance
Dynamic Range: 112 dB A-weighted, 110dB unweighted

Analog Inputs
Number of Inputs: (2) Line inputs. (1) RTA Mic input
Connectors: (2) Female XLR line inputs. XLR RTA Mic input
Type: Electronically balanced/RF filtered
Impedance: >40k ohm
Max Input line level: 20dBu
CMRR: >45dB
RTA Mic Phantom Voltage: 15VDC
RTA Mic EIN: <-110dBu, 22Hz-22kHz, 150 ohm

Analog Outputs
Number of Outputs: 6
Connectors: Male XLR
Type: Electronically balanced, RF filtered
Impedance: 120ohms
Max Output Level: 20dBu
dbx DriveRack PA Processor Features:

Stereo Feedback Elimination with 12 feedback notch filters
Dual 28-band Graphic EQ
Classic dbx Compressor
120A Sub-harmonic Synthesizer
2x3, 2x4, 2x5, 2x6 Crossover Configurations
Stereo Multiband Parametric EQ
Stereo Output Limiters
Alignment Delay
Pink Noise Generator
Auto-EQ with 28-band RTA
JBL Speaker and Crown Power Amp Tunings with Setup Wizard
25 User Programs/25 Factory Programs
2 Channel XLR Input and 6 Channel XLR Output
24-Bit ADC/24-Bit DAC, >110 dB Dynamic Range
Full Graphic LCD Display
It's just one unit. But it does so much.

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
  • USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.