Opens in a new window
ADAM Audio S6X Active Studio Monitor (Single)
Your Price: $35,599.00 CDN
or from $ CDN/mo
The S6X and S7A Mk2 main monitors are designed for large control rooms and film studios. They use a symmetrical concept to increase the realistic reproduction of ADAM monitors to higher sound pressure levels. ADAM has avoided the typical overloading of the bass range that can often be found in main monitors. A wide horizontal radiation characteristic and moderate vertical beaming are crucial factors to minimize the impact of ceiling and floor reflections and achieve neutral sound reproduction at high volumes.
Extended D'Appolito design
A total of seven individual speakers were arrayed so that gradual transitions could be made possible given the size of the cabinet. In addition, we chose a horizontal symmetry that can be described as an extended D'Appolito configuration. This kind of design combined with suitable transition frequencies and filter slopes results in radiation patterns that lead to very consistent reproduction characteristics in the horizontal center position. At the same time, vertical dispersion is reduced so that reflections from the ceiling, floor or mixing console are greatly reduced. Thus, so called 'early reflections' have less chance to interfere, which leads to significantly better stereo imaging and a more three-dimensional sound.
Impulse Coupling
Further progress in development was achieved by the use of Alucore panels, an extra firm component material with an aluminum honeycomb core. All drivers of the S6X and S7A Mk2 are mounted on such panels, which considerably improves mechanical coupling between the drivers and the cabinet.
The S6X: accuracy and power
A number of innovative approaches in conjunction with uncompromising effort in all sonically relevant areas make the S6X one of the largest and most sophisticated active monitors currently available. The horizontal symmetry design is conscious of harmonic and generous diaphragm area proportions to achieve not only a flat frequency response, but also a consistent dynamic behavior within the entire frequency range. Complex orchestral structures can be easily analyzed and spatially arranged on the S6X. Extensive control options on the front panel allow for adjusting to different acoustic situations or personal taste.
Amplification
The built-in amplifiers are coupled to the respective drivers as directly as possible so that remote amplifier units do not compromise the advantages of active technology. One 500 Watt amplifier is assigned to each of the 12" woofers, while 250 Watt units are used the other bands of the frequency range. This main monitor combines very high accuracy exceptional power: SPL peaks far beyond 130 dB are produced without any compression or harshness. The S6X is an excellent choice for large control rooms and film or sound studios.
Control panel
In addition to the input sensitivity that can be adapted in the range of 10 dB, there are four other level controls that affect the individual amplifier modules. Shelving filters at both ends of the frequency spectrum and three fully parametric equalizers help compensate for standing waves in the control room. The EQs can be inserted separately or grouped so their effect can be directly evaluated.
FEATURES
X-ART tweeter, handmade in Berlin
• Allows longer operation with fewer signs of fatigue
• Their breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
• Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)
The air velocity ratio of 4:1 during the sound generation by folded X-ART membrane
• Direct, fast response in the high-range even with complex transients
Ultra-light but extremely dimensionally stable woofer material (HexaCone)
• Excellent transient response even at high sound levels without breakup of the diaphragm
4-way system with 2 x 12" woofer and 2 x 7.5" midrange
• Very high resolution of the stereo image and extremely wide stereo base
Spacious bass reflex ports on the front
• Bass reproduction with very low compression
Highly efficient PWM amplifiers
• Low-distortion amplification at both low and high volume levels
Linear frequency response of 23 Hz to 50 kHz
• Unbiased reproduction in a wide frequency band
Maximum peak sound pressure per pair in 1 m ≥133 dB
• Powerful, compression-free sound reproduction even at very high sound levels
Sophisticated room acoustic adjustments
• Allows optimal adaptation to acoustically difficult listening environments or individual preferences
Analog XLR input
• Optimized for balanced line signals
Directional sound radiation in vertical plane
• Reduction of early reflections on the surfaces of, e.g. mixing consoles, desks, etc.
2 years warranty with optional extension to 3 years with the registration of the product
TECHNICAL DATA
WOOFER
Number: 2
Basket dia: 12" (305 mm)
Voice Coil dia: 3" (75 mm)
Cone Material: HexaCone
MIDRANGE (CONE)
Number: 2
Basket dia: 7.5" (186 mm)
Voice Coil dia: 2" (50 mm)
Cone Material: HexaCone
MIDRANGE
Number: 2
Type: X-ART
Diaphragm Area: 2 x 26 inch (16800 mm)
Equiv. Diaphragm dia: 2 x 5.5" (146 mm)
Velocity Transform Ratio: 3.5:1
Diaphragm Weight: 0.7 g
TWEETER
Number: 1
Type: X-ART
Diaphragm Area: 4 inch (2420 mm)
Equiv. Diaphragm dia: 2" (56 mm)
Velocity Transform Ratio: 4:1
Diaphragm Weight: 0.17 g
BUILT-IN AMPLIFIERS
Woofer: 2
Type: PWM
Amp. Power RMS / Music: 500 W / 700 W
Midrange (cone): 2
Type: PWM
Amp. Power RMS / Music: 250 W / 350 W
Midrange: 2
Type: PWM
Amp. Power RMS / Music: 250 W / 350 W
Tweeter: 1
Type: PWM
Amp. Power RMS / Music: 250 W / 350 W
CONTROL PANEL
Input Sensitivity: +/-10 dB
EQ 80 Hz (Q / Hz / Level): 3 x 0.2 - 20 / 20 - 200 / +/-12 dB
High Shelf EQ > 6 kHz: +/-6 dB
Low Shelf EQ < 150 Hz: +/-6 dB
Sub Gain: +/-4 dB
Mid-Woofer Level: +/-2 dB
Mid Level: +/-2 dB
Tweeter Gain: +/-4 dB
INPUT CONNECTORS
Analog: XLR
GENERAL DATA
Panel: Front
X-Curve Filter: Yes
Frequency Response: 23 Hz - 50 kHz
THD 90 dB / 1 m > 100 Hz: ≤0.5 %
Max. SPL with sine wave acoustic 100 Hz to 3 kHz at 1 m: ≥123 dB
Max. SPL per pair at 1 m: ≥133 dB
Crossover Frequencies: 85 / 800 / 3100 Hz
Input Impedance: 10 kOhm
Weight: 213.8 lb (97 kg)
Magnetically Shielded: No
Height x Width x Depth: 28.5" (720 mm) x 37" (940 mm) x 19.5" (490 mm)
Warranty: 5 years (2 years warranty plus 3 years optional with product registration)
Delivery Contents: Power cord, manual
- German Handmade X-ART Tweeter & 2 x X-ART Midrange
- 2 x 12" and 2 x 7.5" Woofer (HexaCone)
- Amp. Power RMS / Music: 2250 W / 3150 W
- Frequency Response: 23Hz - 50 kHz
- Max. SPL per pair at 1 m: ≥133 dB
Extended D'Appolito design
A total of seven individual speakers were arrayed so that gradual transitions could be made possible given the size of the cabinet. In addition, we chose a horizontal symmetry that can be described as an extended D'Appolito configuration. This kind of design combined with suitable transition frequencies and filter slopes results in radiation patterns that lead to very consistent reproduction characteristics in the horizontal center position. At the same time, vertical dispersion is reduced so that reflections from the ceiling, floor or mixing console are greatly reduced. Thus, so called 'early reflections' have less chance to interfere, which leads to significantly better stereo imaging and a more three-dimensional sound.
Impulse Coupling
Further progress in development was achieved by the use of Alucore panels, an extra firm component material with an aluminum honeycomb core. All drivers of the S6X and S7A Mk2 are mounted on such panels, which considerably improves mechanical coupling between the drivers and the cabinet.
The S6X: accuracy and power
A number of innovative approaches in conjunction with uncompromising effort in all sonically relevant areas make the S6X one of the largest and most sophisticated active monitors currently available. The horizontal symmetry design is conscious of harmonic and generous diaphragm area proportions to achieve not only a flat frequency response, but also a consistent dynamic behavior within the entire frequency range. Complex orchestral structures can be easily analyzed and spatially arranged on the S6X. Extensive control options on the front panel allow for adjusting to different acoustic situations or personal taste.
Amplification
The built-in amplifiers are coupled to the respective drivers as directly as possible so that remote amplifier units do not compromise the advantages of active technology. One 500 Watt amplifier is assigned to each of the 12" woofers, while 250 Watt units are used the other bands of the frequency range. This main monitor combines very high accuracy exceptional power: SPL peaks far beyond 130 dB are produced without any compression or harshness. The S6X is an excellent choice for large control rooms and film or sound studios.
Control panel
In addition to the input sensitivity that can be adapted in the range of 10 dB, there are four other level controls that affect the individual amplifier modules. Shelving filters at both ends of the frequency spectrum and three fully parametric equalizers help compensate for standing waves in the control room. The EQs can be inserted separately or grouped so their effect can be directly evaluated.
FEATURES
X-ART tweeter, handmade in Berlin
• Allows longer operation with fewer signs of fatigue
• Their breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
• Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)
The air velocity ratio of 4:1 during the sound generation by folded X-ART membrane
• Direct, fast response in the high-range even with complex transients
Ultra-light but extremely dimensionally stable woofer material (HexaCone)
• Excellent transient response even at high sound levels without breakup of the diaphragm
4-way system with 2 x 12" woofer and 2 x 7.5" midrange
• Very high resolution of the stereo image and extremely wide stereo base
Spacious bass reflex ports on the front
• Bass reproduction with very low compression
Highly efficient PWM amplifiers
• Low-distortion amplification at both low and high volume levels
Linear frequency response of 23 Hz to 50 kHz
• Unbiased reproduction in a wide frequency band
Maximum peak sound pressure per pair in 1 m ≥133 dB
• Powerful, compression-free sound reproduction even at very high sound levels
Sophisticated room acoustic adjustments
• Allows optimal adaptation to acoustically difficult listening environments or individual preferences
Analog XLR input
• Optimized for balanced line signals
Directional sound radiation in vertical plane
• Reduction of early reflections on the surfaces of, e.g. mixing consoles, desks, etc.
2 years warranty with optional extension to 3 years with the registration of the product
TECHNICAL DATA
WOOFER
Number: 2
Basket dia: 12" (305 mm)
Voice Coil dia: 3" (75 mm)
Cone Material: HexaCone
MIDRANGE (CONE)
Number: 2
Basket dia: 7.5" (186 mm)
Voice Coil dia: 2" (50 mm)
Cone Material: HexaCone
MIDRANGE
Number: 2
Type: X-ART
Diaphragm Area: 2 x 26 inch (16800 mm)
Equiv. Diaphragm dia: 2 x 5.5" (146 mm)
Velocity Transform Ratio: 3.5:1
Diaphragm Weight: 0.7 g
TWEETER
Number: 1
Type: X-ART
Diaphragm Area: 4 inch (2420 mm)
Equiv. Diaphragm dia: 2" (56 mm)
Velocity Transform Ratio: 4:1
Diaphragm Weight: 0.17 g
BUILT-IN AMPLIFIERS
Woofer: 2
Type: PWM
Amp. Power RMS / Music: 500 W / 700 W
Midrange (cone): 2
Type: PWM
Amp. Power RMS / Music: 250 W / 350 W
Midrange: 2
Type: PWM
Amp. Power RMS / Music: 250 W / 350 W
Tweeter: 1
Type: PWM
Amp. Power RMS / Music: 250 W / 350 W
CONTROL PANEL
Input Sensitivity: +/-10 dB
EQ 80 Hz (Q / Hz / Level): 3 x 0.2 - 20 / 20 - 200 / +/-12 dB
High Shelf EQ > 6 kHz: +/-6 dB
Low Shelf EQ < 150 Hz: +/-6 dB
Sub Gain: +/-4 dB
Mid-Woofer Level: +/-2 dB
Mid Level: +/-2 dB
Tweeter Gain: +/-4 dB
INPUT CONNECTORS
Analog: XLR
GENERAL DATA
Panel: Front
X-Curve Filter: Yes
Frequency Response: 23 Hz - 50 kHz
THD 90 dB / 1 m > 100 Hz: ≤0.5 %
Max. SPL with sine wave acoustic 100 Hz to 3 kHz at 1 m: ≥123 dB
Max. SPL per pair at 1 m: ≥133 dB
Crossover Frequencies: 85 / 800 / 3100 Hz
Input Impedance: 10 kOhm
Weight: 213.8 lb (97 kg)
Magnetically Shielded: No
Height x Width x Depth: 28.5" (720 mm) x 37" (940 mm) x 19.5" (490 mm)
Warranty: 5 years (2 years warranty plus 3 years optional with product registration)
Delivery Contents: Power cord, manual
Q & A
There are currently no questions for this product.
Reviews
There are currently no reviews for this product. Be the first to write one!
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| S6X Active Studio Monitor (Single) | 513846 |
