Behringer Powerplay HA8000 V2 8-Channel High-Power Headphones Mixing and Distribution Amplifier
Additional Photos:
The HA8000 offers 8 high-power amplifiers that can drive loads down to 8 Ohms. Each amplifier section features its own 8-digit LED Output Level meter, Main In 1/Main In 2 select switch, a stereo or dual mono select switch, and a 1/4" Direct Input for integrating an additional sound source. The front panel gives you one 1/4" Phones Out jack per channel. The Main Section features a dedicated 5-segment LED Input meter, plus Main In 1 and Main In 2 Level dials.
On the back panel you'll find an additional 1/4" Phones Output per channel, allowing up to 16 pairs of headphones to listen to 8 separate mixes at once. The back panel also provides access to the HA8000's per-channel Direct Inputs and the Main 1 & 2 Inputs.
With 8 discrete channels and the ability to connect up to 16 sets of cans, this is one tool you will use every day.
Features:
- Professional, multi-purpose headphones amplifier system for stage and studio applications
- Highest sonic quality with virtually all types of headphones even at maximum volume
- 8 totally independent stereo high-power amplifier sections in one rack space
- 2 stereo Main inputs for two independent mixes, accessible from all 8 output channels
- 8 independent Direct inputs provide up to 8 individual stereo mixes
- Output level control and accurate 8-digit LED output meter per channel
- Mono/stereo switch per channel for more flexibility
- 1 front and 1 rear TRS phones connector per channel
- Direct input connector on each channel for easy connection of any sound source
- Parallel Main outputs allow cascading of several headphones amplifiers
- "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy savings
Specifications:
Number of Channels: 8
Input Connections:
2 x 1/4" TRS Phone (L/Mono, R) Main Input 1, Balanced
2 x 1/4" TRS Phone (L/Mono, R) Main Input 2, Balanced
8 x 1/4" Stereo Phone Direct Ins
Input Impedances
Main: 20 kOhms balanced / 10 kOhms unbalanced
Direct In: 15 kOhms
Line Max Input Level: + 16 dBu
CMMR: > 50 dB
Headphone Outputs:
8 x 1/4" TRS stereo on front panel
8 x 1/4" TRS stereo on back panel
Maximum Output Level:
+24 dBm @ 100 Ohms
+19 dBm @ 8 Ohms
Function Controls:
1 x Main In 1 Level Control Knob
1 x Main In 2 Level Control Knob
8 x Channel Output Level Control Knobs
8 x Main In 1/Main In 2 Channel Monitoring Switches
8 x Mono Channel Monitoring Switches
Frequency Response:
10 Hz - 150 kHz, +/-3 dB
THD + N: 0.007% typ. @ +4 dBu, 1 kHz, Gain 1
Noise: 22 Hz - 22 kHz > 80 dB @ 0 dBu
Dynamic Range: 103 dB (22 Hz to 22 kHz)
Display
Input Level: 5-digit LED:
Output Level: 8-digit LED: -30, -24, -18, -12, -6, -3, 0 dB, CLIP
Power Supply:
Autorange, 100-240 VAC, 50/60 Hz
Fuse: T1.25AL 250 V
Power Consumption: 35 W
Dimensions (H x W x D): 44 x 483 x 189mm (1.7 x 19 x 5.9")
Weight: 1.9 kg (4.2 lbs)
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Powerplay HA8000 V2 8-Channel High-Power Headphones Mixing and Distribution Amplifier | 504129 |
