Opens in a new window
Alesis M1 Active MK2 - (Pair) Biamplified Reference Monitors
Ce produit n'est plus disponible.
Professional Accuracy, Clarity, and Performance in an Affordable Powered Monitor
By combining our expertise in reference monitor design with our proven track record in studio amplification, Alesis' new M1 Active Biamplified Reference Monitor offers the incredibly accurate response that perfectly translates to every playback system. Its internal active crossover and custom-designed dual amplifiers ensure an extremely consistent performance under a variety of different studio conditions and program material. The result is a broad, extremely flat frequency response, clear imaging with a wide sweet spot, high power handling, and detailed high- and mid-frequency response that only a professional powered monitor can deliver.
Custom Drivers Designed for Active Monitoring
The M1 Active's woofer and tweeter were specifically designed for the most linear, low distortion response in powered monitoring applications. Its 6.5 inch woofer cone is formulated from non-woven carbon fiber. It's a material that has been used for the skins of combat aircraft wings, since it offers high tensile strength and low weight. In fact, carbon fiber is 25% lighter than polypropylene (the most common driver material) and hence provides quicker transient response in the low frequency range for superb bass response as well as a vast improvement in the detail of critical upper-mid frequencies. The M1 Active's inch tweeter dome is made of pure silk, which offers a natural response that aids in preventing ear fatigue during long mix sessions. It also features an internal pole piece mounted phasing plug and is ferrofluid cooled to maintain the best balance of transient response to power handling.
Active Bi-Amplifiers and Electronic Crossovers
Two audiophile-quality amplifiers - a 75 watt woofer amp and a 25 watt tweeter amp - were developed for the M1 Active, along with 8th order high- and low-pass electronic crossover filters. The crossover point was carefully chosen at a low 1500Hz, and produces an extremely wide dispersion zone as well as low midrange coloration. Also, the special time alignment circuitry that's been added to the tweeter section of this crossover allows the output of frequencies from the high and low drivers to occur in perfect synchronization, avoiding the time smear that's typical in less advanced powered speakers.
Attractive Cabinet Design with Dual Ports and Offset Tweeter
In developing the M1 Active, the Alesis engineering team discovered that dual font-mounted ports provided the fastest, most coherent and extended low frequency augmentation. Also, the unique offset design of the high frequency driver allows for the flattest frequency and power response in a speaker that offers such wide dispersion. The M1 Active's attractive mirror-imaged, charcoal-toned cabinet and magnetically-shielded drivers allow for placement in close proximity with computer or video monitors, and offers the added benefit of blending beautifully into your studio's decor without being obtrusive. They may be mounted in either a horizontal or vertical placement to best fit your studio's requirements.
The Alesis M1 Active
With the lineage of our TEC Award-winning Monitor Onet Studio Reference Monitor, Alesis speakers have already become a standard in project and professional studios around the world. If you're looking for the same great accuracy and detailed response in a powered system that's truly affordable, the answer is clear: the new M1 Active from Alesis.
Technical Info
Low Frequency Driver: 6.5 in. non-woven carbon fiber with Santoprene surround and dual magnet shielded configuration
High Frequency Driver: 1 in. silk dome with medium viscosity ferrofluid coolant and dual magnet shielded configuration
Crossover: 1500Hz, 8th-order, 48dB/octave filters
Input Impedance: 20k_ balanced, 10k_ unbalanced
LF Filter: 2nd order, "optimal Q" high pass, +1dB boost@50Hz
LF Amplifier: 75 watts, 8_ load
LF Amp Distortion: less than 0.03% thd @ 30w lf amp slew rate:<>19V/sec
LF Amp S/N Ratio: >110dB, ref. 60W @ 8_, A-wtg., 1kHz
HF Amplifier: 25 watts, 4_ load
HF Amp Distortion: less than 0.06% thd @ rated power lf amp slew rate less than 9V/sec
HF Amp S/N Ratio: >112dB @ rated output
Frequency Range: 38 Hz - 23.5 kHz (-10dB point)
Connectors: Combination XLR-1/4 in. jack with input level control
Dimensions (H x W x D): 15 x 8.5 x 9.75 in. (216 x 381 x 248 mm)
Weight: 19.5 lbs. (8.9 kg)
Reference Manual
These reference monitors offer accurate response for your recording and mixing projects. An internal crossover and dual amplifiers ensure consistent performance at any volume. The result is a broad, flat frequency response, clear imaging with a wide sweet spot, and detailed highs and mids only a professional powered monitor can deliver. With 6.5" woofer, 1" silk tweeter, and 100 watts biamplified (75/25).
By combining our expertise in reference monitor design with our proven track record in studio amplification, Alesis' new M1 Active Biamplified Reference Monitor offers the incredibly accurate response that perfectly translates to every playback system. Its internal active crossover and custom-designed dual amplifiers ensure an extremely consistent performance under a variety of different studio conditions and program material. The result is a broad, extremely flat frequency response, clear imaging with a wide sweet spot, high power handling, and detailed high- and mid-frequency response that only a professional powered monitor can deliver.
Custom Drivers Designed for Active Monitoring
The M1 Active's woofer and tweeter were specifically designed for the most linear, low distortion response in powered monitoring applications. Its 6.5 inch woofer cone is formulated from non-woven carbon fiber. It's a material that has been used for the skins of combat aircraft wings, since it offers high tensile strength and low weight. In fact, carbon fiber is 25% lighter than polypropylene (the most common driver material) and hence provides quicker transient response in the low frequency range for superb bass response as well as a vast improvement in the detail of critical upper-mid frequencies. The M1 Active's inch tweeter dome is made of pure silk, which offers a natural response that aids in preventing ear fatigue during long mix sessions. It also features an internal pole piece mounted phasing plug and is ferrofluid cooled to maintain the best balance of transient response to power handling.
Active Bi-Amplifiers and Electronic Crossovers
Two audiophile-quality amplifiers - a 75 watt woofer amp and a 25 watt tweeter amp - were developed for the M1 Active, along with 8th order high- and low-pass electronic crossover filters. The crossover point was carefully chosen at a low 1500Hz, and produces an extremely wide dispersion zone as well as low midrange coloration. Also, the special time alignment circuitry that's been added to the tweeter section of this crossover allows the output of frequencies from the high and low drivers to occur in perfect synchronization, avoiding the time smear that's typical in less advanced powered speakers.
Attractive Cabinet Design with Dual Ports and Offset Tweeter
In developing the M1 Active, the Alesis engineering team discovered that dual font-mounted ports provided the fastest, most coherent and extended low frequency augmentation. Also, the unique offset design of the high frequency driver allows for the flattest frequency and power response in a speaker that offers such wide dispersion. The M1 Active's attractive mirror-imaged, charcoal-toned cabinet and magnetically-shielded drivers allow for placement in close proximity with computer or video monitors, and offers the added benefit of blending beautifully into your studio's decor without being obtrusive. They may be mounted in either a horizontal or vertical placement to best fit your studio's requirements.
The Alesis M1 Active
With the lineage of our TEC Award-winning Monitor Onet Studio Reference Monitor, Alesis speakers have already become a standard in project and professional studios around the world. If you're looking for the same great accuracy and detailed response in a powered system that's truly affordable, the answer is clear: the new M1 Active from Alesis.
Technical Info
Low Frequency Driver: 6.5 in. non-woven carbon fiber with Santoprene surround and dual magnet shielded configuration
High Frequency Driver: 1 in. silk dome with medium viscosity ferrofluid coolant and dual magnet shielded configuration
Crossover: 1500Hz, 8th-order, 48dB/octave filters
Input Impedance: 20k_ balanced, 10k_ unbalanced
LF Filter: 2nd order, "optimal Q" high pass, +1dB boost@50Hz
LF Amplifier: 75 watts, 8_ load
LF Amp Distortion: less than 0.03% thd @ 30w lf amp slew rate:<>19V/sec
LF Amp S/N Ratio: >110dB, ref. 60W @ 8_, A-wtg., 1kHz
HF Amplifier: 25 watts, 4_ load
HF Amp Distortion: less than 0.06% thd @ rated power lf amp slew rate less than 9V/sec
HF Amp S/N Ratio: >112dB @ rated output
Frequency Range: 38 Hz - 23.5 kHz (-10dB point)
Connectors: Combination XLR-1/4 in. jack with input level control
Dimensions (H x W x D): 15 x 8.5 x 9.75 in. (216 x 381 x 248 mm)
Weight: 19.5 lbs. (8.9 kg)
Reference Manual
These reference monitors offer accurate response for your recording and mixing projects. An internal crossover and dual amplifiers ensure consistent performance at any volume. The result is a broad, flat frequency response, clear imaging with a wide sweet spot, and detailed highs and mids only a professional powered monitor can deliver. With 6.5" woofer, 1" silk tweeter, and 100 watts biamplified (75/25).
Q et R
There are currently no questions for this product.
Avis
Il n'y a actuellement aucun commentaire sur ce produit.
Protégez votre investissement avec la Garantie de fiabilité Long & McQuade.
Une bonne garantie est souvent un facteur décisif au moment d’un achat. Étant donné qu’une réparation peut être très dispendieuse, les manufacturiers n’offrent en général qu’une protection limitée d’un an couvrant seulement les défauts de fabrication. Lors d’une acquisition aussi importante que celle d’un instrument de musique ou d’une pièce d’équipement, vous voudrez avoir l’assurance que votre achat sera protégé de façon adéquate.
C’est pourquoi Long & McQuade offre une année GRATUITE de sa Garantie de fiabilité sur la plupart de ses produits. Cette couverture, qui bonifie celle du fabricant, vous procurera la tranquillité d’esprit que vous recherchez.
En quoi la garantie Long & McQuade se distingue-t-elle de celles des autres fabricants?
- Fiabilité assurée : l’usure normale de certaines pièces est couverte. Le produit fonctionnera aussi bien qu’au premier jour pour toute la durée de la protection. Pour les instruments d’orchestre, nos techniciens et techniciennes évalueront la nécessité d’effectuer un nettoyage en profondeur, un remplacement de tampons ou un nettoyage à ultrasons. Ces services ne sont pas offerts systématiquement dans le cadre de la Garantie de fiabilité.
- Possibilité de remplacement : si votre produit est irréparable ou coûte trop cher à remettre en état, nous l’échangerons contre un modèle identique ou équivalent, sans frais supplémentaires. Si ce n’est pas possible, nous vous accorderons un remboursement complet.
- Politique anticitron : si votre article présente un problème récurrent, nous le remplacerons.
- Accessibilité : vous pouvez vous prévaloir de votre garantie dans n’importe quelle succursale Long & McQuade.
- Réglage de guitare : une mise au point gratuite est incluse à l’achat de toute guitare neuve ou d’occasion.
- Prêt de matériel : un produit de rechange peut être mis à votre disposition pendant la réparation de votre article.
- Survoltage couvert : l’appareil est garanti même s’il est endommagé par une surtension.
- Assurance-accessoires : tous les accessoires fournis avec le produit (pédale, étui, etc.) sont couverts.
- Usage commercial approuvé : l’équipement acheté pour une utilisation intensive bénéficie aussi de cette protection.
Long & McQuade se réserve le droit de limiter l’achat d’années additionnelles. Les produits d’occasion sont protégés par la Garantie de fiabilité pour une durée de trois mois. Certains articles (logiciels, cymbales, etc.) sont couverts uniquement par la garantie du fabricant. Les biens non durables (cordes, anches, baguettes, piles, tubes, etc.) sont exclus, tout comme les dommages accidentels, la détérioration esthétique et les problèmes causés par l’humidité ou la température. Les haut-parleurs endommagés par un usage excessif ne sont généralement pas couverts. Notre garantie ne compense pas la perte de jouissance. A partir de juin 2018, la garantie de performance n'est plus transférable. Valide seulement au Canada.
Achat d’années additionnelles de garantie
Certains fabricants offrent une garantie de plus d’un an, mais qui est en général limitée et moins avantageuse que la nôtre. Lorsque c’est le cas, la prolongation de notre protection vous sera tout de même profitable, du fait qu’elle est plus complète et pratique.
Vous pouvez acheter des années supplémentaires de notre protection si vous souhaitez en profiter plus longtemps. Les tarifs sont les suivants :
- Produits NEUFS : à partir de 4 % du prix actuel de l’article à l’état neuf par année supplémentaire.
- Produits D’OCCASION : à partir de 4 % du prix actuel de l’article à l’état neuf pour passer initialement de trois mois à un an. À partir de 4 % pour chaque année de plus.
- Guitares : 4 % du prix actuel de l’article à l’état neuf pour passer d’un an à deux. 4 % pour chaque année de plus. Tarif maximum de 45 $. Une mise au point gratuite supplémentaire n’est pas incluse avec l’achat d’années de couverture additionnelles.
- Instruments d’orchestre : 4 % du prix actuel de l’article à l’état neuf pour passer d’un an à deux. 4 % pour chaque année de plus.
Complétez votre achat
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| M1 Active MK2 - (Pair) Biamplified Reference Monitors | 71117 |
