Departments > Pro Audio & Recording > Subwoofers > Powered Subwoofers > Alto Professional > TS215S Truesonic 2 1250W 15'' Powered Subwoofer

Alto Professional TS215S Truesonic 2 1250W 15'' Powered Subwoofer

SKU: # 499519   |   Model: # TS215S   |    Product Reviews1 Reviews  Write a Review

TS215S Truesonic 2 1250W 15\'\' Powered Subwoofer

Additional Photos:

TS215S Truesonic 2 1250W 15\'\' Powered Subwoofer
TS215S Truesonic 2 1250W 15\'\' Powered Subwoofer
 This product is no longer available.
For those performance situations where additional low-frequency output and punch are required, even beyond the already-impressive bass capability of the TS2 full-range speakers, the new TS2 powered subwoofers are the perfect solution

Pair TS215S with any full-range speaker system to extend the bass response and dramatically enhance the overall impact of the music being played.

FEATURES

• 1250 watts of peak power output
• Custom engineered high-efficiency Class D amplifiers with passive cooling design no fan means the speaker runs cleaner, quieter and has greater long-term reliability
• 15-inch high-excursion woofer
• (2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
• Polarity Reverse, Full-Range Output and Extended LF controls
• Electronic clip, thermal and transducer overdrive protection
• Rugged, internally-braced front-ported plywood cabinet
• Integrated 35mm speaker pole socket

SPECIFICATIONS

Output Power: 1250 W peak, 625 W continuous
Transducer Low: 15" (381 mm) woofer, 3" (76 mm) voice coil
Frequency Response: 35-95 Hz (-10 dB)
Maximum SPL: 129 dB (@ 1 m)
Connections: (2) XLR+1/4" (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input
Input Level: Line +4 dBu (nominal)
External Controls: Volume control, signal/clip limiter with LED, polarity-reverse switch, high-pass filter bypass switch with LED, extended low-frequency switch with LED, power switch with LED
Electronic Protections: Electronic clip, thermal and transducer overdrive protection
Enclosure: Internally braced plywood cabinet; 35 mm mounting pole socket ontop panel
Power Connection: Standard IEC cable
Input Voltage: 110120, 220240 V AC; 50/60 Hz
Consumption: 450W
Fuse: T6.3AL AC250V (110120 V) or T3.15AL AC250V (220240 V)
Dimensions (W x D x H): 21.34" x 20.3" x 24.8" / 542 x 515 x 630 mm
Weight: 62 lbs. / 28.2 kg

Q & A


There are currently no questions for this product.

Reviews


3.138.69.145
Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; [email protected])
A lot of sub for the money 2 of 2 customers found this review helpful
Features  
Quality  
Value  
Overall  
Product Experience   I own it
Closest Store   Guelph, Ontario
I picked one of these up unseen. Good reviews, and it fit in the front seat of my (big) car. I bought it to add some thump to a compact bar-sized p.a. with 12" powered tops. Despite specs that say it goes lower, I put a hi-pass filter at 48 Hz. to protect the driver, and tighten up the sound a bit. Overall, it does exactly what it should, and punches well with a classic rock band in your average 150 seat bar. Negatives- You can tell by the weight this is made of MDF. Not ideal for cabinets as it's VERY heavy, and not as tough as plywood. Time will tell on the quality and longevity, but Alto products improve every generation, and are getting great all around respect.
Posted by Paula Pykala on Aug 23, 2018
Was this review helpful? Vote helpful Vote not helpful flag this review

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
  • USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

Great Additions