Audient ASP008 - 8 Channel Variable Impedance Mic Preamp

SKU: # 319609   |   Model: # ASP008   |    Product Reviews0 Reviews  Write a Review

ASP008 - 8 Channel Variable Impedance Mic Preamp
 This product is no longer available.
The ASP008 is a compact, 1U rack mount unit featuring eight ultra high quality mic preamplifiers developed from the renowned mic-pre design used in the acclaimed ASP8024 recording console.

The design uses an 8 transistor discrete Class A front end with extended band-width and a noise floor close to the theoretical Johnson limit. Carefully chosen close tolerance components are used to achieve high CMRR at all gain settings and distortion is minimised to less than 0.001% at 20dB gain and +10dBu output. This outstanding technical performance delivers a mic amp with incredible transparency and detail without colouration or other unwanted artefacts.

Each Mic amp also features switchable input impedance, allowing the user to explore the subtle variations in microphone character that are determined by output termination.

All channels include an XLR input, 'soft start' 48V phantom power, switchable input impedance, 25-250Hz hi-pass filter as well as line input selection. Channels 1 and 2 also feature a -20dB attenuator and a high-impedance Instrument/DI input on a front panel mounted jack. LEDs provide indication of signal present and overload.

Two digital output option cards are available - one with ADAT optical interface, the other with AES/EBU and ADAT. Both cards now support sample rates of up to 96kHz over ADAT S/MUX.

CONTROLS

48VPhantom Power ON/OFF with 'soft start' feature to avoid thumps
INST/DICH 1&2 only. Selects jack instrument input with input impedance > 1MOhm
-20dB20dB Pad (CH1&2 ONLY)
LINESelects Line level input with input impedance of 10kOhm
PolarityPolarity invert
FilterSelects 12dB/octave Hi-Pass filter - range 25Hz to 250Hz
PKIndicates signal levels within 4dB of clipping
SIGIndicates signal levels above -25dBu
I/P ZInput impedance select 200/1200/5000 ohms
GAINMIC/DI 0 to 60dB. LINE -20 to 40dB
Sample RateSelectable 44.1/48/88.2/96 kHz
DitherSelectable 16/20/24 bit

INTERFACES

MIC InputElectronically balanced XLR with variable input impedance
LINE InputElectronically balanced 25 pin D wired to DA88 standard
INST/DI InputUnbalanced front panel mounted jack
LINE OutputElectronically balanced 25 pin D wired to DA88 standard
Digital outputOptional 48/96kHz AES, S/PDIF and 48kHz ADAT light-pipe.
Ext Word ClockBNC

PERFORMANCE

Maximum input/output level+21.5dBu
THDTypically better than 0.007% at 1kHz any gain setting
EINBetter than -127.5dB @ 60dB gain/ref 150 Ohms
Frequency Response-0.3dB @10Hz to -3dB @300kHz at unity gain
CMRRBetter than 75dB at 1kHz and 60dB gain
Dimensions480mm x 278mm x 44mm
Weight4.5Kg

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
  • USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.