Mesa Boogie Lonestar 30 1x12

Additional Photos:

Introducing the new Pure Class A, EL-84 Powered LONE STAR SPECIAL featuring Channel Assignable Power (patent pending) that allows you to assign 1, 2 or all 4 EL-84s to either of its 2 Channels for independent Power Ratings of 5, 15 or 30 Watts!
In one short year, the stylistic momentum of the Lone Star has been overwhelming.
Players and reviewers alike have bestowed global accolades on this gem, including prestigious Editors Pick and Platinum Awards.
So why another Lone Star? Because tone this good, demands it!
Take that incredibly expressive pre-amp with its intuitive versatility, add the vintage magic of EL-84s running Pure Class A and a new classic is born.
Where its Big Brother boasts the huge warmth and headroom of 6L6 power, the Special delivers seductive, bubbly tone and a sensual, elastic feel. This Lone Star is short on weight, but tall on personality.
Authentic retro-tone is all about power and the way it clips. Yet in any given amp, the sweet-spot of power clip is inseparably tied to its wattage and playing loudness. The Lone Star Special smashes this age-old limitation by offering three distinct power configurations, each with its own window of wattage: 30, 15, or 5. Perfect Power. Per Channel. On Demand.
Thirty Watts, bold and pure from all four power tubes punches through the mix and hangs with a band in mid-size venues. Fifteen watts cries the blues with sinful passion coaxing expressive soul from an electron-soaked pair of EL-84s. Both these circuits run Pure Class A in a Push-Pull configuration. But what really makes this Lone Star Special is its ability to switch down to five watts of single-ended power bliss (patent pending).
In Push-Pull circuits, the second harmonic is cancelled out when the two halves of the wave-form are re-combined in the output transformer. Unlike Push-Pull, Single-Ended circuits preserve this most musical of all harmonics. A subtle coating of warm distortion (an octave above the note youre playing) glazes the entire spectrum with a purring, golden halo of precious nuance. Perfect for individual playing or recording. For a full description of this technology see Randall Smith's "Class A - Exposed and Explained."
Between the two Lone Stars, you can choose to clip your power at 5, 15, 30, 50 or 100 watts. All this bouncy Class A tone blooms naturally in a trim new 1x12 cab roughly 3/4s the size of its Big Brother. (And you can afford to pack both these hand-crafted jewels for around the same bling-bling as a one-trick pony from the boutique corral. But dont shop price compare tone!)
Gigging at the club rehearsing with the band recording in the studio tracking at home or simply finding inspiration late at night the finely tuned power sections of the Lone Star Special transcend all these needs going where no single amp has gone before.TONE AS THICK
AS WEST TEXAS CRUDE!
Introducing the new Pure Class A, EL-84 Powered LONE STAR SPECIAL featuring Channel Assignable Power (patent pending) that allows you to assign 1, 2 or all 4 EL-84s to either of its 2 Channels for independent Power Ratings of 5, 15 or 30 Watts!
In one short year, the stylistic momentum of the Lone Star has been overwhelming.
Players and reviewers alike have bestowed global accolades on this gem, including prestigious Editors Pick and Platinum Awards.
So why another Lone Star? Because tone this good, demands it!
Take that incredibly expressive pre-amp with its intuitive versatility, add the vintage magic of EL-84s running Pure Class A and a new classic is born.
Where its Big Brother boasts the huge warmth and headroom of 6L6 power, the Special delivers seductive, bubbly tone and a sensual, elastic feel. This Lone Star is short on weight, but tall on personality.
Authentic retro-tone is all about power and the way it clips. Yet in any given amp, the sweet-spot of power clip is inseparably tied to its wattage and playing loudness. The Lone Star Special smashes this age-old limitation by offering three distinct power configurations, each with its own window of wattage: 30, 15, or 5. Perfect Power. Per Channel. On Demand.
Thirty Watts, bold and pure from all four power tubes punches through the mix and hangs with a band in mid-size venues. Fifteen watts cries the blues with sinful passion coaxing expressive soul from an electron-soaked pair of EL-84s. Both these circuits run Pure Class A in a Push-Pull configuration. But what really makes this Lone Star Special is its ability to switch down to five watts of single-ended power bliss (patent pending).
In Push-Pull circuits, the second harmonic is cancelled out when the two halves of the wave-form are re-combined in the output transformer. Unlike Push-Pull, Single-Ended circuits preserve this most musical of all harmonics. A subtle coating of warm distortion (an octave above the note youre playing) glazes the entire spectrum with a purring, golden halo of precious nuance. Perfect for individual playing or recording. For a full description of this technology see Randall Smith's "Class A - Exposed and Explained."
Between the two Lone Stars, you can choose to clip your power at 5, 15, 30, 50 or 100 watts. All this bouncy Class A tone blooms naturally in a trim new 1x12 cab roughly 3/4s the size of its Big Brother. (And you can afford to pack both these hand-crafted jewels for around the same bling-bling as a one-trick pony from the boutique corral. But dont shop price compare tone!)
Gigging at the club rehearsing with the band recording in the studio tracking at home or simply finding inspiration late at night the finely tuned power sections of the Lone Star Special transcend all these needs going where no single amp has gone before.
- Handbuilt in the Petaluma, California
- Pure Class A, Multi-Watt, Channel Assignable Power Amp (Patent 7,602,927) allows you to assign either 1, 2 or all 4 Power Tubes to each Channel for Power Ratings of 5, 15 or 30 Watts per Channel via independent 5/15/30 - Watt Power Switches / 4xEL84, 5x12AX7, 1x5Y3
- Rectifier Tracking (5&15 Watt Mode = Tube, 30 Watt = Diode - Patents 5,168,438 & 7,193,458)
- 2 Fully Independent Channels each with Gain, Treble, Mid, Bass, Presence, Reverb & Master Controls
- Channel 1= Boutique Vintage Clean/Classic Breakup
- Channel 2= Clone of Ch 1 or Cascading High Gain
- Drive/Clean Switch activates Ch 2 Drive Control (Multi-Stage Cascading Gain Circuit)
Thick/Normal/Thicker Voicing Switch (Channel 2)
All-Tube, Long
- Spring Reverb with Bright/Warm Reverb Tone Switch
- Output Level Control (over all channels
when activated)
- Footswitchable Solo Level Control Patent 6,724,897 (over all channels when activated)
- Fully Buffered FX Loop with Send Level Control (over all channels when activated)
- True Hard Bypass Switch that removes FX Loop, Output - Level & Solo Level Controls from signal path
- Slave Out w/Level Control
- Fan Cooled with On/Off Switch
- External Switching
- Jacks for Channels 1/2, Solo & Reverb
- All Aluminum Chassis
- 2 Button Footswitch (Channel 1/2 & Solo)
- Slip Cover
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.