Departments > Pro Audio & Recording > DJ > DJ - Mixers - Tabletop > IK Multimedia > iRig Mix DJ Style Mixer for iOS Devices

IK Multimedia iRig Mix DJ Style Mixer for iOS Devices

SKU: # 368866   |   Model: # IRIG MIX   |    Product Reviews0 Reviews  Write a Review

iRig Mix DJ Style Mixer for iOS Devices

Additional Photos:

iRig Mix DJ Style Mixer for iOS Devices
iRig Mix DJ Style Mixer for iOS Devices
Your Price: $129.99 CDN
or from $19 CDN/mo
Notify Me

Buy Online

 Add to Cart

Buy In-Store

The Ultra Compact DJ mixer for iPhone, iPod touch, iPad.

iRig MIX is the first mobile mixer for iPhone, iPod touch, or iPad. iRig MIX offers the same controls you would expect from a professional DJ mixer (crossfader, cues, EQ and volume controls, etc.) in an ultra-compact mobile mixer that can be used with a huge variety of iOS DJ mixing and other apps. It is a complete DJ system for rehearsing, performing and recording. The lightweight and slim design of the iRig MIX allows it to be easily carried in a regular iPad bag. For the first time on any DJ mixer - iRig MIX can be used for mixing any type of audio source (coming from mp3 players, CD players, etc.) with an iOS device using automatic tempo matching and beat syncing. This is accomplished with X-Sync, a feature that works in combination with the DJ Rig free app from IK Multimedia that is included with iRig MIX.

iRig MIX Mobile Mixer is designed to accommodate virtually any small mixing and DJ-ing situation you may encounter: mix from a single iOS device, two devices, or an iOS device and an alternative music source (CD/MP3 players, etc.). Plus, there's an additional channel input that allows you to hook up a microphone, guitar or bass and use real-time iOS apps to process the signal, making iRig MIX the ideal small-format portable mixer.

Hit Single

iRig MIX allows you to mix from a single iOS device. If you use a DJ app on your iOS device like DJ Rig, then mixing on one device is a breeze. The signal from one device is sent into channel 1, and with the input switch set to single device, the incoming signal is split into two mono signals and sent to each individual channel. This allows you to mix two sources in real-time using a single device, but with both channels on the mixer. (A DJ app like DJ Rig is required for this setup since it sends two sources through the stereo out jack on your device.)

Dual-ing iPhones

Plug an iOS device into both inputs and youre ready to mix in a traditional dual-deck format. In dual-device mode, you can easily cue and beat-sync source material for seamless transitions. Each channel has a 3.5mm (1/8") input with an input gain control, treble and bass EQ controls, a "cue" button for auditioning material via the headphone jack, channel level faders and channel crossfader. iRig MIX is extremely easy to use and one of the most intuitive mixers you'll ever put your hands on.

Play with the Band

iRig MIX isn't just a DJ Mixer. In fact, you can use it for small groups or solo work as your main PA mixer. When you plug an instrument or microphone into the auxiliary 1/4" jack on the bottom of the mixer, you can use an iOS device to process your signal when it's plugged into channel 1 (make sure X-Sync is off). The signal travels from the input jack, through the gain control, out of the dual-mode channel 1 input jack, through your iOS device signal processing app, back into the channel 1 input jack, through the EQ, fader then out through the main outs. This way, you can use your iOS apps like VocaLive (vocals) or AmpliTube to fine-tune and sculpt your sound on stage in real-time. Amazing.

X-Sync-opation

When using the free DJ Rig app, something amazing happens - you can automatically beat-sync tunes when the X-Sync button is active. With beat-syncing, there's never an awkward gap or pause in the music so you can keep the non-stop groove going and never miss a beat.

Fits in a bag

The ultra-compact size and low profile of the iRig MIX allows it to easily be carried in a regular iPad bag. Plus its low-voltage power supply (only 5VDC) allows it to be powered not only by any regular mobile device charger but also by suitable USB battery pack and laptop USB port for maximum mobility to mix anywhere.

Includes 4 free apps

iRig MIX includes 4 free apps (downloads from the iTunes app store): DJ Rig, the new professional DJ mixing app from IK, AmpliTube, the most popular iOS guitar amp and effects app, VocaLive the processing app for vocalists, and GrooveMaker, the loop based beat and groove making app.

Features:

• 2 stereo inputs with gain, bass, treble and volume controls, independent cue on each channel with LED indication and channel cross-fader
• Instrument/microphone/extra input with volume control can be processed by iOS apps (such as AmpliTube, VocaLive)
• Stereo output with RCA connectors, master level and LED meters
• High quality, pristine sound
• Quality headphone output for master or cue monitoring with independent volume control
• Input switch splits Input 1 into dual-mono for use with DJ mixing apps on a single iOS device
• "X-Sync" mode allows auto-sync with any audio source using the included DJ Rig free app
• Can be powered with the included AC adapter, battery pack and laptop USB ports
• Includes 4 free apps: DJ Rig, AmpliTube, VocaLive, GrooveMaker

Package includes:

iRig MIX
2 x 3.3ft / 1m 1/8" / 3.5mm audio cables to connect iPhone/iPod/iPad
1 x 3.3ft / 1m RCA audio cable to connect powered speakers
Power Supply Unit with micro USB cable

Dimensions:

Dimensions (W x L x H): 110mm/4.33" x 217mm/8.54" x 46mm/1.81"
Weight: 230g/8.11oz

Specs:

Line Input:

Frequency response: 20Hz 20kHz (2dB)
SNR: -80dB
THD+Noise: 0.01%
Nominal level: -10dBV
Maximum level: 3 Vrms
Impedance: 47k Ohm
Socket: 3.5mm stereo / TRRS

Line Output:

Frequency response: 20Hz 20kHz (2dB)
SNR: -80dB
THD+Noise: 0.05% (20Hz 20kHz Bandwidth)
Nominal level: -10dBV
Maximum level: 6 Vrms
Impedance: 200 Ohm
Socket: RCA

Mic / Hi-Z Input:

Frequency response: 20Hz 20kHz (2dB)
SNR: -80dB
THD+Noise: 0.05% (20Hz 20kHz Bandwidth)
Maximum level (Min Gain): 3Vrms
Minimum level (Max Gain): 10mVrms
Impedance: 1 MOhm
Socket: 6.35mm mono

Headphones Output:

Frequency response: 20Hz 20kHz (2dB)
SNR: -80dB
THD+Noise: 0.05% (20Hz 20kHz Bandwidth)
Maximum power: 125mW into 32 Ohms
Socket: 6.35mm stereo

Controls:

Low tone controls: 15 dB @ 80 Hz, shelving
High tone controls: 15 dB @ 8 kHz, shelving
Trim controls: 15 dB, 0 dB at center

Power Supply:

USB powered through a micro USB (D TYPE) connector
Power consumption: 5 Watt typical; 10 Watt with full headphone output

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.