Opens in a new window
RODE PSA1 Desktop Boom Arm
Compatible microphones : Procaster, Podcaster, PodMic
The PSA1 is a studio boom arm for radio, broadcast, studio and home use. It provides full 360 degree rotation.
The PSA1 has a horizontal reach of 820mm, and a vertical reach of 840mm. It is supplied with velcro cable wraps and both desk-clamp and desk-insert style attachments for verstile mounting in desks up to 55mm thick (clamp) or 70mm (insert).
***Mic and shockmount not included***
The PSA1 is a studio boom arm for radio, broadcast, studio and home use. It provides full 360 degree rotation.
The PSA1 has a horizontal reach of 820mm, and a vertical reach of 840mm. It is supplied with velcro cable wraps and both desk-clamp and desk-insert style attachments for verstile mounting in desks up to 55mm thick (clamp) or 70mm (insert).
***Mic and shockmount not included***
Q & A
There are currently no questions for this product.
Reviews
18.116.24.111
Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; [email protected])
Plastic Base Snapped 0 of 0 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Calgary Chinook, Alberta
I bought and used one of these for over a year with relatively light load (an old JVC handheld dynamic I had lying around, pretty similar to an SM58). It never stayed where I wanted it to, and tightening the screws did not actually appear to accomplish anything. Barely usable, and irritating to work with. The base looks nice, but the plastic cone that holds the arm down is not durable - mine suddenly snapped completely and dropped the entire assembly on the ground. I don't understand why Rode decided to make the most critical component of this product out of plastic, but That. Is. Bad. Design. I won't be making the mistake of buying a replacement. Don't pay this much for something this mediocre.
Posted by Ian on Mar 8, 2024
Solid Workhorse of a Microphone Arm 4 of 4 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Edmonton North, Alberta
I purchased this arm to replace a cheapo $30 arm that was starting to show significant wear for a streaming setup. Initially, I had tried out other high-end tube styled arms (like the Blue Compass), but decided that this Rode PSA1 was the one that suited my needs better. The biggest selling point to me was how ready out-of-the-box this arm is and the reach that this could go which is something like 32" reach. Much farther than I need it to go for a streaming setup, but nice to have that play room. The build quality in the arm and the mount are much heftier, and it feels like this arm will last me for many years to come. Also, a little silicone oil on the visible spring on the joint goes a long way to make this arm operate a lot smoother and quieter as part of regular maintenance.
Also something to think about, but if you want your microphone to stay levelled while the arm moves, the parallelogram design and scissor arm mechanism is precisely what lets it do it. Something I've learned the hard way that tube-style arms fail to do, simply by the inherent fault of their tube design. The Rode PSA1, however, is scissor arm, so no problems here.
Also something to think about, but if you want your microphone to stay levelled while the arm moves, the parallelogram design and scissor arm mechanism is precisely what lets it do it. Something I've learned the hard way that tube-style arms fail to do, simply by the inherent fault of their tube design. The Rode PSA1, however, is scissor arm, so no problems here.
Posted by Bryan on Feb 18, 2022
Solid Microphone Arm - For microphones hanging down 4 of 4 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Scarborough, Ontario
Purchased the arm to replace a working but cheaply made microphone arm. Used with both a Shure SM7B and an EV RE20 microphone without issue from the perspective of weight and placement/adjustment. Very quiet adjustments and easy to install. Acceptable (low) handling noise transfer to microphone. One note, not of caution but of preference; personal preference for the RE20 to be hanging down and the Shure SM7B to be supported from the bottom. Even with an extension tube (Shure A26X), could not adjust the Shure SM7B to be vertical.
In my case, switch the arms between the two mics and both personal preferences were accommodated!
Yes, it's more expensive than other arms; but you feel the difference in material and build quality immediately. Great value for the price.
Overall a really solid microphone arm and recommend highly.
Posted by Wil on Jan 13, 2021
Worth it 8 of 8 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Toronto (Bloor St.), Ontario
great quality, using it for the Rode N1TA condenser mic with shock mount and pop filter attached. it easily handles the weight.. worth spending the money on versus looking for a cheap one.
Posted by Matteo on Feb 6, 2018
Not Just for Rode Mics 5 of 6 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Vancouver, British Columbia
Just needed to point out, this is compatible with most shock mounts. Not just the podcaster and procaster.
Posted by anonymous on Mar 24, 2015
Just got it! 2 of 3 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Scarborough, Ontario
Not bad so far easy to set up, and use, It ajusts to whats comfortable, hope it lasts.
Posted by anonymous on Dec 26, 2012
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| PSA1 Desktop Boom Arm | 286000 |
