Rivera Amplification 55w 2-Channel Acou/Elec Amp w/Tweeter
Additional Photos:
Two independent channels of warm, glorious vacuum tube tone enhance and wrap every note you play in an envelope of light. Each channel has 3-band equalization, along with several exclusive tone-enhancing features, including a Notch switch that allows you to change the characteristics of the vital midrange frequencies, and a Bright switch to accentuate the harmonics.
Channel 1 features a special ultra-low-noise input that allows you to accept signals from balanced or unbalanced instruments or a microphone.
Instruments like the Taylor ES series with balanced outputs will be at their optimum when used in Channel 1 with the balanced input. Even if your guitar is an inexpensive model, using it with the Sedona Lite, will provide your sound with the best of tonal ingredients.
Channel 2 features a harmonically active unbalanced input to amplify either a passive or active instrument, including electric guitars.
Instruments with multiple outputs, such as the Fishman system that utilizes a microphone as well as a piezo transducer, can utilize both channels simultaneously to balance the level and tone between the two instrument signal sources.
For lounge and small-venue performers wanting to keep it simple, the Sedona Lite can act as a small P.A. system as well as an instrument amplifier. Just plug your microphone into Channel 1 and your instrument into Channel 2, and, voila, you have the warmth of tubes for your voice as well as your instrument.
In the age of digital effects, we are proud to provide the legendary, costly, analog Accutronics mechanical reverb as a standard feature. With its special deep, lush sonic character, it enhances your tones with a sweet and natural swell and decay.
With built-in parametric anti-feedback controls on the front panel, you can easily eliminate irritating low-frequency droning sounds as well as enhance the overall tone of your instruments.Adding presence and shimmer to your instruments and voice is simple with the Presence control, conveniently located on the front panel.
Patching your pedals or rackmount effects was never easier with a full serial effects loop that features separate level controls for the send and return. (Paul Rivera invented this concept almost 40 years ago with his previous work designing amps for Fender and Yamaha.)Recording your Sedona Lite or providing a live feed to a house P.A. system is a snap with the separate direct output with its own level control.
An extra rear-panel speaker jack is provided, so adding an external Sedona extension enclosure for those larger gigs takes only seconds.
Specs
Speaker Output Impedance: 8 ohms
Direct Box Output Impedance: 600 ohms
Preamp Tubes: Two12AX7A
Output Tubes: Two EL-34
Output Power: 55 Watts RMS into 8 ohms
Speaker system: 12" Celestion G12T-75 8-ohm, high-power dome tweeter
Speaker System power handling: 75Watts RMS
Crossover Network: 12 dB/octave air-core inductor
Crossover frequency: 4kHz
Reverb Type: Accutronics Spring
Height: 18"
Width: 20.75"
Depth: 12"
Weight: 49lbs(estimate)
Cabinet Thickness: 3/4"
Baffleboard: 3/4" Plywood
Covering: Nubtex
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.