Opens in a new window
QSC K10 1000 Watt 10'' Active 2-Way Loudspeaker
Additional Photos:
This product is no longer available.
K10 Features include:
• 10" Woofer; 1.75 diaphragm compression driver
• 90-degree Nominal coverage angle
• Maximum SPL 129 dB peak
• 1000-watt continuous Class D power modules in all models
• Onboard mixer with two combo XLR and inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
• Extensive DSP enhances system performance
• DMT (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
• Intrinsic Correction, first featured in our high-end line-array products maps 6575 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
• DEEP and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
• GuardRail protection protects both the amplifier module and your performance from unnatural and destructive clipping.
Attractive and professional appearance
• Rugged ABS enclosures
• Functions as a monitor wedge
• 16-gauge powder coated steel grille
• Comfortable ergonomic handles
• 35 mm pole sockets with Tilt-Direct
• M10 rigging points
• Eyebolt and yoke mount accessories available
Specifications:
K10
Configuration: Multipurpose 2-way
Transducers:
- Low-frequency - 10" cone transducer
- High-frequency - 1.75" diaphragm compression driver
Frequency Response (-6 dB): 60 Hz to 18 kHz
Frequency Range (-10 dB): 56 Hz to 20 kHz
Nominal Coverage (-6 dB): 90 conical
Maximum SPL (theoretical): 129 dB peak
Amplifiers
Power Output: 1000 W continuous Class D (500 W LF, 500 W HF)
2000 W peak
Input Impedance:
- XLR / 1/4": 40 kΩ balanced / 20 kΩ unbalanced
- XLR / 1/4" MIC mode: 2260Ω balanced
- RCA: 10 kΩ
Controls: Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators: Power, Signal A, Signal B, Standby, Limit, Mic
Connectors:
- Balanced female XLR/1/4" line/mic level input
- Balanced female XLR/1/4" line level input
- Dual Balanced male XLR full range line level out
- Balanced male XLR "mix" out
- Stereo RCA line level input
- Remote gain control
- Locking IEC power connector
Cooling: On demand, 50 mm variable speed fan
Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail
Transducer Protection: Thermal limiting, excursion limiting
AC Power Input: Universal power supply 100240 VAC, 50 to 60 Hz
AC Power Consumption (1/8 of full power):
- 100 VAC, 2.3 A
- 120 VAC, 2.01 A
- 230 VAC, 1.13 A
Enclosure
Material: Impact resistant ABS
Finish: Black paint
Grille: Rugged powder-coated steel
Dimensions (HWD): 519 mm x 320 mm x 300 mm (20.4" x 12.6" x 11.8")
Weight (Net): 32 lb / 14.5 kg
• 10" Woofer; 1.75 diaphragm compression driver
• 90-degree Nominal coverage angle
• Maximum SPL 129 dB peak
• 1000-watt continuous Class D power modules in all models
• Onboard mixer with two combo XLR and inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
• Extensive DSP enhances system performance
• DMT (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
• Intrinsic Correction, first featured in our high-end line-array products maps 6575 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
• DEEP and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
• GuardRail protection protects both the amplifier module and your performance from unnatural and destructive clipping.
Attractive and professional appearance
• Rugged ABS enclosures
• Functions as a monitor wedge
• 16-gauge powder coated steel grille
• Comfortable ergonomic handles
• 35 mm pole sockets with Tilt-Direct
• M10 rigging points
• Eyebolt and yoke mount accessories available
Specifications:
K10
Configuration: Multipurpose 2-way
Transducers:
- Low-frequency - 10" cone transducer
- High-frequency - 1.75" diaphragm compression driver
Frequency Response (-6 dB): 60 Hz to 18 kHz
Frequency Range (-10 dB): 56 Hz to 20 kHz
Nominal Coverage (-6 dB): 90 conical
Maximum SPL (theoretical): 129 dB peak
Amplifiers
Power Output: 1000 W continuous Class D (500 W LF, 500 W HF)
2000 W peak
Input Impedance:
- XLR / 1/4": 40 kΩ balanced / 20 kΩ unbalanced
- XLR / 1/4" MIC mode: 2260Ω balanced
- RCA: 10 kΩ
Controls: Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators: Power, Signal A, Signal B, Standby, Limit, Mic
Connectors:
- Balanced female XLR/1/4" line/mic level input
- Balanced female XLR/1/4" line level input
- Dual Balanced male XLR full range line level out
- Balanced male XLR "mix" out
- Stereo RCA line level input
- Remote gain control
- Locking IEC power connector
Cooling: On demand, 50 mm variable speed fan
Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail
Transducer Protection: Thermal limiting, excursion limiting
AC Power Input: Universal power supply 100240 VAC, 50 to 60 Hz
AC Power Consumption (1/8 of full power):
- 100 VAC, 2.3 A
- 120 VAC, 2.01 A
- 230 VAC, 1.13 A
Enclosure
Material: Impact resistant ABS
Finish: Black paint
Grille: Rugged powder-coated steel
Dimensions (HWD): 519 mm x 320 mm x 300 mm (20.4" x 12.6" x 11.8")
Weight (Net): 32 lb / 14.5 kg
Q & A
There are currently no questions for this product.
Reviews
18.219.241.228
Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; [email protected])
best in class! 0 of 0 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Mississauga, Ontario
I own two of the K10's which I use as part of a mobile DJ service, mostly for weddings and corporate functions. These are light, loud, and sound great. I often use only the two speakers for most small events; for larger rooms I use a small powered sub as well just to round out the bottom end since the top end of the volume dial is where you notice the lack of bass. The carry bags are a nice addition, they can handle the power cable and a medium length XLR cable in each bag. The RCA input is a nice feature for using an iPod for background music or a backing track for a small live act. The compact size is really handy for transport as well, they fit in my car's trunk with room to spare. I would totally recommend these and I can't see myself going to another brand or model any time soon, these do everything I need.
Posted by alex on May 19, 2017
Excellent portable powered speaker 0 of 0 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Mississauga, Ontario
I have a "one man" show. I needed something portable that sounded convincing when I play my backing tracks through it. I do gigs for up to 100 people and I needed something loud enough to get people dancing. The K10 does the trick. I have even used it outside and had no issues. For larger halls I would need to get another one and maybe a sub but really somfar I haven't need any more firepower.
Posted by anonymous on Apr 19, 2017
Excellent clear and clean sound! 1 of 1 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Winnipeg (Pembina), Manitoba
I own a pair of the K-10's, K-8's and a KSub. The K-10's with the sub are crystal clear and get really loud if you need it without breaking up. These are very versatile speakers that are road worthy and dependable. I have used the K-8's as monitors with the K-10's and they work fine with a minor alteration that allows them to be used on their side. I choose the K-10's, because as a singer, you get the best vocal clarity from the 10" speakers and QSC doesn't disappoint.
Posted by Kirk on Jan 31, 2016
Really powerful for how small it is 1 of 1 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Calgary Royal Vista, Alberta
I bought a pair of these along with the KW 181 Subs and the system pounds. It sounds just the way it should loud and clean. I use them for mobile DJ work. There are plenty of smaller venues that these could even handle by themselves. But I prefer to bring a sub to help round out the sound anyways. For the much larger shows I use a set of KW 153 for the front end and use the K10's as monitors. Overall I am super happy with the quality and sound as well as the versatility of plug in and outs on the back. I use the RCA in a lot. I suggest getting the carry bag to protect them and make them easier to haul into the gigs. Power and portability make this a well rounded cabinet.
Posted by sam on Nov 11, 2015
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| K10 1000 Watt 10'' Active 2-Way Loudspeaker | 441720 |
