Apogee AD-16-X - 16 Channel A/D Converter

SKU: # 201139   |   Model: # AD-16-X   |    Product Reviews0 Reviews  Write a Review

AD-16-X - 16 Channel A/D Converter

Additional Photos:

AD-16-X - 16 Channel A/D Converter
 This product is no longer available.
Connect the X-Series directly to your Symphony System, Pro Tools HD, or to any Native DAW via the X-Symphony, X-HD or X-FireWire card

AD & DA-16X converters offer the most advanced conversion system in the Apogee product line. With up to 192k standard sample rates, the X-series converters combine Apogee’s legendary conversion quality with the very latest in high-definition digital to provide unrivaled flexibility and quality. The AD-16X featuring 16 channels of analog to digital conversion and the DA-16X featuring 16 channels of digital to analog conversion, both also offer Big Ben’s C777 clocking technology, SoftLimit and UV22HR.

Advanced High-Definition Conversion
The most critical component in the digital recording environment is proper, high-quality conversion and since the dawn of digital recording the most desired converters have been made by Apogee. With up to 192k standard sample rates, the AD & DA-16X combine Apogee’s legendary conversion quality with the very latest in high-definition digital to provide unrivaled flexibility and quality.

FEATURES
16 channels of premium 24-bit A/D conversion
Sample rates up to 192k
16 channels of AES, ADAT/SMUX Output
Word Clock I/O
Optional HD card for direct connection to ProTools HD
Optional FireWire expansion card for compatibility with OS X and Windows XP (X-Firewire card)
All option cards (X-FireWire and X-HD) facilitate connection of multiple units
"Soft Limit" for maximum digital level without overs (can be applied to a single channel or all channels)
"UV22HR" for superior dither of high resolution audio to 16-bit (can be applied to a channel pair or all channels)
Direct Digital Synthesis (DDS) using Big Ben's C777 Clock Technology up to 192kHz
Adaptive Loop Filtering (ALF) for optimum clock performance and minimum jitter
Support for AES double wire and SMUX formats
Post A/D conversion level monitoring
Intuitive front panel calibration
Word Clock termination switch

INPUTS
Analog in 1-8 Balanced, DSUB 25pin connector
Analog in 9-16 Balanced, DSUB 25pin connector
WC in: BNC 75 ohm with switchable termination

OUTPUTS
AES-EBU out x 8, transformer balanced, DSUB 25pin connector (192k single wide compatible)
Optical: toslink x 4, supporting ADAT and SMUX protocol
WC out: BNC 75 ohm

OPTION SLOT
One x-type card can be installed, for Firewire, HD and or other future format connectivity.

SPECS
Sample rates internal: 44.1/48/88.2/96/176.4/192k
Sample rates external: 44.1/48/88.2/96/176.4/192k +/- 10%
Frequency response at 44.1 k : 5 - 20.000 Hz (+/- .2 dB)
Analog levels: 6 to 24dBu max through digital gain adjustment. (Compatible with -10dBV levels)
THD+N: -110 dB
Dynamic range: 120 dB A weighted
Power: 100 -240 VAC, 50 - 60 Hz, 65 Watt

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
  • USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.