Opens in a new window
Audix 84 Inch Carbon Fiber Boom with Cardioid Microphone
(Shown with optional stand, not included.)
84" Carbon Fiber Boom, Clutch Assembly and M1250B Cardioid Mic for Overhead Miking.
A PROBLEM SOLVER FOR MANY HARD-TO-REACH MIKING APPLICATIONS.
The MicroBoom is designed for use with any of the microphones in The Micros series. The MB8450HC system comes with the M1250B cardioid mic, and includes a 25 foot cable with mini XLR - XLR connectors. The mini XLR attaches to the end of the MicroBoom for a clean, discreet look.
A high quality shielded cable is used internally to insure the cleanest audio signal path between the microphone and the bottom of the boom. The stand adapter offers total control over the angle, rotation and position of the carbon fiber rod by way of a flexible metal gooseneck. The MicroBoom provides an ultra-clean, professional and elegant appearance on stage while providing exceptional performance and portability.
Features:
• Lighweight, rigid
• Portable, easy to position
• Clean, elegant appearance
• 84 inches long
• Exceptional sound quality
• No external power needed
• Attaches to any mic stand
• Can be used horizontally or vertically
• Includes M1250B cardioid mic
M1250B Specifications:
Transducer Type: Condenser
Frequency Response: 50 Hz - 19 kHz
Polar Pattern: Cardioid
Output Impedance: 150 ohms
Sensitivity: 10 mV / Pa @ 1k; 32 mV / Pa @ 1k
Signal/Noise Ratio: (A-weighted) 73 dB
Equivalent Noise Level: (A-weighted) 21 dB
Maximum SPL @ .5% THD: ≥140 dB
Dynamic Range: 119 dB
Power Requirements: 18 52 V
Connector: 3 pin mini-XLRm
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Housing / Finish: Machined brass / Powder coat
Weight: 20 g / 0.7 ounces
Length: 54 mm / 2.1 inches
84" Carbon Fiber Boom, Clutch Assembly and M1250B Cardioid Mic for Overhead Miking.
A PROBLEM SOLVER FOR MANY HARD-TO-REACH MIKING APPLICATIONS.
The MicroBoom is designed for use with any of the microphones in The Micros series. The MB8450HC system comes with the M1250B cardioid mic, and includes a 25 foot cable with mini XLR - XLR connectors. The mini XLR attaches to the end of the MicroBoom for a clean, discreet look.
A high quality shielded cable is used internally to insure the cleanest audio signal path between the microphone and the bottom of the boom. The stand adapter offers total control over the angle, rotation and position of the carbon fiber rod by way of a flexible metal gooseneck. The MicroBoom provides an ultra-clean, professional and elegant appearance on stage while providing exceptional performance and portability.
Features:
• Lighweight, rigid
• Portable, easy to position
• Clean, elegant appearance
• 84 inches long
• Exceptional sound quality
• No external power needed
• Attaches to any mic stand
• Can be used horizontally or vertically
• Includes M1250B cardioid mic
M1250B Specifications:
Transducer Type: Condenser
Frequency Response: 50 Hz - 19 kHz
Polar Pattern: Cardioid
Output Impedance: 150 ohms
Sensitivity: 10 mV / Pa @ 1k; 32 mV / Pa @ 1k
Signal/Noise Ratio: (A-weighted) 73 dB
Equivalent Noise Level: (A-weighted) 21 dB
Maximum SPL @ .5% THD: ≥140 dB
Dynamic Range: 119 dB
Power Requirements: 18 52 V
Connector: 3 pin mini-XLRm
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Housing / Finish: Machined brass / Powder coat
Weight: 20 g / 0.7 ounces
Length: 54 mm / 2.1 inches
Q & A
There are currently no questions for this product.
Reviews
There are currently no reviews for this product. Be the first to write one!
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| 84 Inch Carbon Fiber Boom with Cardioid Microphone | 407479 |
