Behringer Studio XL High-End Studio Control and Communication Center

Additional Photos:




Did you know that Midas is one of the most recognized brands used by audio professionals around the world? Now you can get the gear the pros use! The STUDIO XL comes with two state-of-the-art Midas microphone preamplifiers with +48 V phantom power, ultra-low noise, high gain and audiophile quality.
The STUDIO XL is the ideal solution for home or professional studios, or as part of a larger setup. Premium, ultra-low noise components and high headroom lets your music shine at its best this is especially true for one of the most critical sources: Vocals!
Crystal Clear Signal Path at 192 kHz
The STUDIO XL is more than just a monitor controller Behringer added one of the best USB audio interfaces with the highest possible resolution and lowest latency. Full 192 kHz sampling rate at a clear 24-bit resolution will make you smile listening to the crisp and astonishing sound you'll get.
With the STUDIO XL, you won't have to worry about any USB noise or hum. A super-quiet USB I/O with up to 8 dB less noise than other audio interfaces on the market, while the lower output impedance on the STUDIO XL allows for even higher output volume.
VCA-Control - Not Just a Volume Knob
Unlike the typical and inexpensive potentiometers used by our competitors, the STUDIO XL utilizes high-end Voltage Controlled Amplifier (VCA) technology. While conventional monitor controllers directly pass the signal through the volume potentiometer, the STUDIO XL controls a separate high-precision amplifier circuit that drives the volume change. This gives perfect stereo and phase coherency, precision level adjustment, accurate sound and no quality degradation over time.
Behringer's really big dial allows you to make precise adjustments with ease and set levels fast and accurately critical to the final sound when it comes to mixing and mastering.
The All-In Device
The STUDIO XL integrates seamlessly into your existing setup. You can even make it the center piece of your studio. Thanks to the built-in audio interface and Midas microphone pre-amps it becomes an all-in-one recording solution, just add your computer and you're ready to go.
Instantly switch between audio sources, USB and monitor outputs. The large volume knob makes it easy to dial-in the perfect level every time, without having to reach for your mixer or your mouse. Now you can create powerful, custom monitor mixes. Plus, the built-in Talkback mic lets you communicate directly with the talent.
More Monitor Options
Today's recordings must sound great everywhere: in the car, at home, on your cell phone, soundbar, Bluetooth speakers and in the club It's essential experience your mix through as many speaker systems as possible.
The ultra-convenient STUDIO XL lets you switch between 3 independent pairs of studio monitors each with individual level adjustments. Listen through studio monitors (such as Behringer B2031A, MS16 or Tannoy GOLD 5), or any other combination at the mere press of a button!
Connections Matter
The STUDIO XL comes with three pairs of input connectors, additional Aux Mix stereo input, and a 3.5 mm (1/8") stereo input on the front for connecting a smartphone or music player, as well as three pairs of high-quality outputs to connect your favorite monitor speakers.
The first 2 inputs can be fed by a line source or any type of microphone, in any combination operating in dual mono or stereo-link mode. Not to mention the 2-Track and Studio/Phones Amp outputs which can be used for a variety of applications. Connect a 2-track digital recorder, an additional soundcard, mixer, headphones distribution amplifier or whatever you require.
Let's Communicate
You can select between an internal or external mic to talk to the talent in the isolation booth. The STUDIO XL's high-quality, built-in microphone is just a button push away. There's even a Talkback Footswitch option that frees up your hands and lets you concentrate on what's important, the music. The onboard headphone amplifier section lets you connect 2 pairs of headphones with individual level controls and a separate source selector, which will make the next session one of your best.
Not to forget, the STUDIO XL also comes with the most important switches exactly where you need them right at your fingertips. Mono and Mute buttons and even a Dim switch which instantly reduces the signal going to the monitor speakers by 20 dB. Perfect for momentarily lowering the volume to talk to someone without moving the knob.
High Quality, Best Value
Behringer designed the STUDIO XL to provide many years of super-clean, high-fidelity performance in the most critical listening environment yours! Built from the highest-grade components, the STUDIO XL is the perfect way to add a lot more convenience into your current studio setup.
Features
• Premium, ultra-low noise and high headroom studio control and communication center• All-in-one master volume controller, source selector, monitor switcher and talkback box
• 2 state-of-the-art, Midas mic preamplifiers with +48 V phantom power
• Audiophile 192 kHz 2x4 USB audio interface, perfect for computer-based studios
• True VCA control for extremely precise level control and stereo tracking
• 6 inputs with level controls plus additional aux mix input and USB monitoring from your DAW
• 3 independent and adjustable monitor outputs to connect up to 3 sets of studio monitors
• Versatile talkback options with built-in and external microphone input with footswitch and level control
• Convenient mono, mute and dim functions right at your fingertips
• 2 powerful headphone amplifiers with separate volume controls and source select switches
• Zero-latency direct monitoring with controlled blending between direct inputs and cue mix sources
• Quick-access aux input to connect your smartphone and music player for reference tracks
• High-precision dual LED meters for perfect level overview
Specifications
InputsInputs: 6
Preamps: 2 x Midas designed
Type: 2 x XLR / TRS combo connector (mic/line)
Impedance: Mic: 3 kΩ / Line: 1 MΩ
Line inputs: 4 x 1/4" TRS, balanced or unbalanced, +4/-10 dB (Input 5/6 only), 1 x 1/8" TRS stereo (input 5/6)
Maximum input level: +22 dBu
Talback input: 1 x XLR
Footswitch: 1 x 1/4" TRS
Outputs
Outputs: 5 stereo
Line outputs: 10 x 1/4" TRS, balanced or unbalanced
Headphone outputs: 2 x 1/4" TRS stereo
Maximum output level: +22 dBu
USB
Type: Class compliant USB 2.0, type B
Supported operating systems: Windows 10/ Mac OS X 10.14 or higher
Audio: 2 in / 4 out
Converter resolution: 24-bit
Supported sample rate: 44.1, 48, 88.2, 96, 192 kHz
Talkback Section
Output level: -∞ to +10 dB
Talback level: -∞ to max
Takback destination: 2 track or cue
Talkback input: Internal (mic) or external (XLR)
Footswitch: Activates talkback
Controls
Phantom power: +48 V (inputs 1/2)
Volume: High-precision stereo tracking VCA volume control 0 - 100%
Playback controls: Mono, Mute, Dim
Monitor select: A, B, C
Input 1/2: 48 V on/off, Stereo on/off, 1/2 (channel select) on/off
Input 3/4: -12 to +12 dB Trim, 3/4 (channel select) on/off
Input 5/6: -12 to +12 dB Trim, 5/6 (channel select) on/off
USB input: USB (channel select) on/off
Muted: -60 dB
Dim: -20 dB
Cue source: Aux Mix, Source, USB 3/4
Studio outs: -∞ to max, on/off
Direct monitoring: Inputs to Cue blend
Phones 1/2: Level control -∞ to max, individual source select
System
Frequency response: 20 Hz to 20 kHz (+0.5 dB)
Signal-to-noise ratio: -90 dBu RMS, un-weighted
Distortion (THD+N): 0.01% @ 1 kHz, unity gain, 4 dBu input
Crosstalk: -60dB @ 1 kHz, unity gain, 4 dBu input
Power Requirements
Mains voltage: 100-240 V, 50/60 Hz
Power supply: 12 V DC 2000 mA
Power consumption: 18 W max
Physical
Standard operating temperature range: 5° C 45° C (41° F 113° F)
Dimensions (H x W x D): 80 x 328 x 163 mm (3.15 x 12.91 x 6.42")
Weight: 1.8 kg (3.97 lbs)
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.