Opens in a new window
Fluid Audio Image 2 3-Way Reference Monitor (Single)
Additional Photos:
Your Price: $2,599.00 CDN
or from $153 CDN/mo
Image 2 Professional 3-Way Reference Studio Monitor is a dedicated nearfield/midfield workhorse. Using the latest DSP and Class-D amplification, Fluid Audio has pushed the limits to create stunning results. Delivering accurate imaging, extremely flat frequency response, and incredible bass extension with very low distortion in a closed cabinet.
With Sonarworks SoundID Reference integration, the room calibration correction will import directly into embedded platform of the monitor. Giving users the ability to create their own calibration profile for their monitor setups to remove unwanted coloration and experience the most accurate studio reference sound for any studio or home environment.
2 in 1 monitor: A full range mixing and mastering system that can switch into cubemix mode at the press of a footswitch. Cubemix mode enables engineers to dial-in low end and midrange levels for even playback on many "bass challenged" devices. It further helps with the adjustment of vocals, nailing the kickdrums and overall balance.
It's future-ready USB port expands the incredible functionality and provides the ability to upload and run exported room correction files natively at the monitor level, as well switching between profiles (supports loading up to 4 different SoundID Reference profiles) and cubemix mode.
The newly developed AMT tweeter (Air Motion Transformer) delivers precise, detailed response, expansive headroom, and low distortion, while the aluminum cone mid-range driver utilizes a shorting ring within its motor structure to substantially reduce harmonic distortion. Focusing the magnetic flux and concentrating it within the voice coil gap reduces modulation movement of the voice coil which makes the variation of system inductances more linear as input current varies. The end result is accuracy so clean; mixing takes on a whole new flow.
The opposed, dual 8" ultra-long-throw bass woofers offer a wide frequency response, extending down to 40Hz with +/- 2.2 dB deviation. From 80Hz to 20kHz, the response is even flatter at +/- 2.0 dB. This, coupled with their interlocked magnet design, results in improved dynamics and room response. Each bass driver is individually powered by the latest state-of-the-art 225W Class-D amplifier.
Driving the entire system is the newly developed Class-D Quad amplifier. Spending the most development time on this important element, the amplifier has extremely low self-noise, very low distortion, improved THD+N performance, improved IMD performance, and lower output impedance. The sealed enclosure design provides a natural, 6db/oct roll off for a more controlled low frequency response. This translates into less likelihood of unwanted interaction with the room, which means these monitors are less sensitive to positioning.
Mixing or mastering on the Image 2 will deliver professional results that are more accurate, and more effortlessly achieved than ever before. Making it one of the best speaker for music production.
ACCURATE AND TRANSPARENT
Using the Fluid Audio DCT (DSP Configuration Tool) you can push SoundID Reference calibration profiles to the built-in embedded DSP platform onboard the Image 2. This will compensate for room imperfections that acoustically treated and un-treated rooms sometimes have. Using SoundID Reference (v5.6 and newer) and a measuring microphone, you can measure your room, create calibration curves specifically for your environment and upload them directly onto the Image 2 with the DCT tool. The Image 2 supports up to 4 different profiles.
As an example: Flat target, Dolby Atmos Music, Custom Target as well as Translation Check. All of these can be loaded as different profiles and switched between using the DCT tool running on Windows or OSX. (USB has to be connected to both monitors to switch between the profiles). You can also enable and disable cubemix mode using the DCT tool (which will not affected by the calibration profiles).
COMPACT ALL IN ONE
Fluid Audio has ingeniously incorporated precision accuracy, controlled directivity. Impressively, this system maintains an extended bass response down to -3dB @38Hz (in chamber), ensuring a comprehensive audio experience. The Image 2 stands as a testament to uncompromising audio quality, catering to the discerning preferences of recording engineers and audio enthusiasts alike.
In essence, Fluid Audio's Image 2 offers a complete audio solution, blending pinpoint accuracy, directional control, and a diverse range of input options, all within a space-saving design. Its exceptional bass performance makes it a preferred choice for those seeking exceptional sound quality in a compact format.
DSP AND CONVERTERS
Fluid Audio Image 2 DSP board feature great performance in every aspect. Flagship discrete AD/DA converters. Together with well optimized signal circuitry improves the S/N ratio to 115 dBa.
The in-house developed digital signal processing system introduces a range of features that greatly enhance the studio experience. In addition to the analog XLR input, there are an AES digital in and SPDIF IN/out, enabling the possibility of daisy chaining two Image 2 speakers. Moreover, the digital connection bypasses interface conversions, effectively reducing unwanted artifacts.
- Frequency Response: + 2.2dB 40Hz-20kHz ; -3dB @ 38Hz
- Crossover: Bass / Mid : 154Hz, Mid / Treble : 2800 Hz
- Driver Dimensions: 2 x 8" Bass + 1 x 5" Midrange + ⌀ 1.1" x 1.7" AMT Tweeter, 2 x ⌀ 203 mm Bass + ⌀ 130 mm Midrange + ⌀ 28 x 43 mm AMT Tweeter, AMT Tweeter unfolded size 4.5" x 1.1" / 114 x 28 mm (total radiation area)
- Amplifier Power: 2 x 225 W Bass (Class D), 150 W Midrange (Class D), 75 W Treble (Class D)
- Signal Processing: AD Converter : 24 bit, Internal sample rate : 192kHz
- Audio Input Connectors: Analog XLR/TRS, Digital AES (supports AES/EBU) and SPDIF connection
- Acoustic adjustments rear panel: High Freq: -1, 0, +1 / Mid Freq: -1, 0, +1 / Low Freq: -2, -1, 0, +1, +2
- Rear panel other: Digital / Analog selector, Channel sellect digital input L/R, Auto standby On/Off, GND lift, Footpedal input for CubeMix mode
With Sonarworks SoundID Reference integration, the room calibration correction will import directly into embedded platform of the monitor. Giving users the ability to create their own calibration profile for their monitor setups to remove unwanted coloration and experience the most accurate studio reference sound for any studio or home environment.
2 in 1 monitor: A full range mixing and mastering system that can switch into cubemix mode at the press of a footswitch. Cubemix mode enables engineers to dial-in low end and midrange levels for even playback on many "bass challenged" devices. It further helps with the adjustment of vocals, nailing the kickdrums and overall balance.
It's future-ready USB port expands the incredible functionality and provides the ability to upload and run exported room correction files natively at the monitor level, as well switching between profiles (supports loading up to 4 different SoundID Reference profiles) and cubemix mode.
The newly developed AMT tweeter (Air Motion Transformer) delivers precise, detailed response, expansive headroom, and low distortion, while the aluminum cone mid-range driver utilizes a shorting ring within its motor structure to substantially reduce harmonic distortion. Focusing the magnetic flux and concentrating it within the voice coil gap reduces modulation movement of the voice coil which makes the variation of system inductances more linear as input current varies. The end result is accuracy so clean; mixing takes on a whole new flow.
The opposed, dual 8" ultra-long-throw bass woofers offer a wide frequency response, extending down to 40Hz with +/- 2.2 dB deviation. From 80Hz to 20kHz, the response is even flatter at +/- 2.0 dB. This, coupled with their interlocked magnet design, results in improved dynamics and room response. Each bass driver is individually powered by the latest state-of-the-art 225W Class-D amplifier.
Driving the entire system is the newly developed Class-D Quad amplifier. Spending the most development time on this important element, the amplifier has extremely low self-noise, very low distortion, improved THD+N performance, improved IMD performance, and lower output impedance. The sealed enclosure design provides a natural, 6db/oct roll off for a more controlled low frequency response. This translates into less likelihood of unwanted interaction with the room, which means these monitors are less sensitive to positioning.
Mixing or mastering on the Image 2 will deliver professional results that are more accurate, and more effortlessly achieved than ever before. Making it one of the best speaker for music production.
ACCURATE AND TRANSPARENT
Using the Fluid Audio DCT (DSP Configuration Tool) you can push SoundID Reference calibration profiles to the built-in embedded DSP platform onboard the Image 2. This will compensate for room imperfections that acoustically treated and un-treated rooms sometimes have. Using SoundID Reference (v5.6 and newer) and a measuring microphone, you can measure your room, create calibration curves specifically for your environment and upload them directly onto the Image 2 with the DCT tool. The Image 2 supports up to 4 different profiles.
As an example: Flat target, Dolby Atmos Music, Custom Target as well as Translation Check. All of these can be loaded as different profiles and switched between using the DCT tool running on Windows or OSX. (USB has to be connected to both monitors to switch between the profiles). You can also enable and disable cubemix mode using the DCT tool (which will not affected by the calibration profiles).
COMPACT ALL IN ONE
Fluid Audio has ingeniously incorporated precision accuracy, controlled directivity. Impressively, this system maintains an extended bass response down to -3dB @38Hz (in chamber), ensuring a comprehensive audio experience. The Image 2 stands as a testament to uncompromising audio quality, catering to the discerning preferences of recording engineers and audio enthusiasts alike.
In essence, Fluid Audio's Image 2 offers a complete audio solution, blending pinpoint accuracy, directional control, and a diverse range of input options, all within a space-saving design. Its exceptional bass performance makes it a preferred choice for those seeking exceptional sound quality in a compact format.
DSP AND CONVERTERS
Fluid Audio Image 2 DSP board feature great performance in every aspect. Flagship discrete AD/DA converters. Together with well optimized signal circuitry improves the S/N ratio to 115 dBa.
The in-house developed digital signal processing system introduces a range of features that greatly enhance the studio experience. In addition to the analog XLR input, there are an AES digital in and SPDIF IN/out, enabling the possibility of daisy chaining two Image 2 speakers. Moreover, the digital connection bypasses interface conversions, effectively reducing unwanted artifacts.
Specifications
- Max SPL: 116 dB (Dual Monitors) 113dB (Single)- Frequency Response: + 2.2dB 40Hz-20kHz ; -3dB @ 38Hz
- Crossover: Bass / Mid : 154Hz, Mid / Treble : 2800 Hz
- Driver Dimensions: 2 x 8" Bass + 1 x 5" Midrange + ⌀ 1.1" x 1.7" AMT Tweeter, 2 x ⌀ 203 mm Bass + ⌀ 130 mm Midrange + ⌀ 28 x 43 mm AMT Tweeter, AMT Tweeter unfolded size 4.5" x 1.1" / 114 x 28 mm (total radiation area)
- Amplifier Power: 2 x 225 W Bass (Class D), 150 W Midrange (Class D), 75 W Treble (Class D)
- Signal Processing: AD Converter : 24 bit, Internal sample rate : 192kHz
- Audio Input Connectors: Analog XLR/TRS, Digital AES (supports AES/EBU) and SPDIF connection
- Acoustic adjustments rear panel: High Freq: -1, 0, +1 / Mid Freq: -1, 0, +1 / Low Freq: -2, -1, 0, +1, +2
- Rear panel other: Digital / Analog selector, Channel sellect digital input L/R, Auto standby On/Off, GND lift, Footpedal input for CubeMix mode
Q & A
There are currently no questions for this product.
Reviews
There are currently no reviews for this product. Be the first to write one!
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Image 2 3-Way Reference Monitor (Single) | 814142 |
