TC-Helicon Harmony V60 2-Channel Acoustic Amplifier
Additional Photos:
Product Videos :
The Harmony V60 Acoustic Amplifier is crammed full of features and innovations that can help you weave intricate, evolving sounds at home or in clubs and halls. Maximize your audio potential to capture attention and hold it with an array of fascinating vocal and guitar effects and looping in an easy-to-carry processor and amplifier system.
Immersive Guitar Sound
Leave your pedals at home. A suite of sweet guitar effects that would normally require a large pedal board is included. There's a fast, accurate Tuner, BodyRez to improve the feel and tone of your undersaddle pickup, 3 band EQ and separate Chorus, Reverb and Echo with their own styles and mix controls. All you add is a guitar and your groove.
Stunning Vocals
Everybody knows the main link to an audience is vocals and TC Helicon's studio-quality vocal processing lets your voice shine. With Adaptive Tone for instant "producer polish", transparent pitch correction, two additional virtual Harmony voices and the lush expansiveness of Reverb and Echo, your voice will excite like never before.
Room Filling Guitar And Vocals
60 Watts of Class D bi-amplification provided by separate amps for the lows and highs ensures powerful, precise sound. The 8" dual concentric speaker (woofer and tweeter in one) by legendary brand Tannoy projects a point source sound wave for the widest possible listening field while keeping the speaker's enclosure compact.
Hear Yourself Better
When you turn on Harmony V60's additional top-firing tweeter, an exclusive innovation from TC Helicon, you'll finally get to hear more of what your audience hears. No more muffled sound or putting the amp on a chair, now you get an exciting sound standing beside, in front or behind your Harmony V60.
Fast-Acting Automatic Anti-Feedback
The Harmony V60 acts automatically to minimize screeching and howl for the Vocal and Guitar channels respectively. You get to continue playing and singing instead of switching and dialing EQ controls when feedback happens.
Multiply Yourself
Within seconds you can build a sound greater than the sum of its parts with the 90 second looper and its unlimited overdubs. Looper input can be Voice, Guitar or both and your loop length automatically sets tap tempo so echoes play nicely in time. Imagine each overdub with a different, tasty effect!
And The Footswitch Is Included!
Looping, vocal processing and guitar effects can all be controlled by the rugged 4 button footswitch that comes with Harmony V60. A default mapping of footswitches to effects is provided but customization is easy and fast if you want quick footswitch access to the Tuner for example.
Comfortable On The Big Stage Or Your Laptop
Dry and effected XLR or USB outputs offer mixing and tracking versatility for front of house mixer or when you want to record. These can also be used either in a single stereo pair or individual mono channels.
Features
• 60 Watt 2-channel acoustic amplifier with amazing vocal processing• 8" Tannoy Dual-Concentric speaker and an exclusive Top-Firing tweeter provide massive crystal clear audio to you AND your audience
• 4-button customizable footswitch to control looper, harmony and effects included
• Voice channel with Adaptive Tone, Intelligent Anti-feedback, Pitch Correction, Harmony, Reverb and Delay
• Guitar channel with BodyRez, Intelligent Anti-feedback, Tuner, Reverb, Delay, Chorus and 3 band EQ
• Built-in looper for practicing, developing ideas and enhancing live performances
• Harmony function automatically creates up to 2 voices of smooth and accurate vocal harmonies
• BodyRez restores natural tone to acoustic guitars when using piezo under-saddle pickups
• Intelligent anti-feedback on each channel automatically stops feedback
• Accurate integrated chromatic tuner with mute function
• Dual XLR DI jacks with flexible routing for complete control of your sound
• USB output for direct recording to a computer allows easy capture
• Dedicated Aux input for playback of MP3 players, drum machines, etc
Specifications
Audio inputs- Guitar input: 1/4" TRS balanced/XLR combo
- Input impedance: 2 MΩ balanced/1 MΩ unbalanced
- Microphone input: 1/4" TRS balanced/XLR combo
- Input impedance: XLR: 2.9kΩ balanced; 1/4" 10kΩ TRS balanced/5k TS unbalanced
- Aux input: 3.5 mm TRS stereo
Audio outputs
- Guitar/right out and Mic/left out: XLR balanced, female
- Output impedance: 400 Ω
- Max. output level: 0 dBu
- Switches: DI, FX, Mix
- Headphones out: 3.5 mm TRS stereo
- Output impedance: 10 Ω
- Max. output level: 8 dBu
Vocal section controls
- Knobs: Volume (1 to 10) Adaptive tone (off to max) Correction (off to max) Harmony selector, 8 position Reverb (off, room, club, hall) Echo (off, tape, digital, slap)
- Switches: Phantom on/of Talk on/of Anti-feedback on/off, Harmony enable/disable
- LEDs: Phantom (red), Reverb (green), Echo (green), Harmony voice (green, 8 selections
- Backlit switches: Talk (green), anti-feedback (green, or blue when operating), harmony (green)
Guitar section controls
- Knobs: Volume (0 to 10) Bass, shelving (-12 to 12 dB) Mid, peaking (-12 to 12 dB) Treble, shelving (-12 to 12 dB) Chorus (detune, silk, corona) Reverb (off, room, club, hall) Echo (off, tape, digital, slap)
- Switches: Mute on/off Anti-feedback on/off Bodyrez off, Bodyrez-1, Bodyrez-2 Bodyrez-3 Harmony enable/disable
- Display: Tuner note 8-segment, red
- LEDs: Chorus (green), reverb (green), echo (green) Tuner sharp/flat/in-tune (red)
- Backlit switches: Mute (red), anti-feedback (green, or blue when operating), bodyrez (red, green, blue selections)
Footswitchable controls
- Microphone Section: Talk on/off Harmony on/off at the current setting Reverb on/off Echo on/off
- Guitar section: Mute on/off Chorus on/off Reverb on/off Echo on/off Harmony on/off at a selected setting
- Looper section: Tap Tempo Play/record Stop
- LEDs: Green when footswitch engaged, red when recording
Looper controls
- Knobs: Level (0 to 10)
- Switches: Voice/all/guitar Tap tempo Play/record Stop
- Backlit switches: Tap tempo (flash red at tempo), play/record (green play, red record), stop (red)
Rear panel section
- Connections: AC input IEC USB B type Foot switch, 5-pin DIN (for FST4 only) Guitar/right out, XLR male Mic/left out, XLR male Aux in, 3.5 mm
- Switches: AC power on/off toggle Top tweeter on/off Guitar/right out, DI/FX/MIX selector Mic/left out, DI/FX/MIX selector Ground lift, XLR audio
- Knobs: Aux input level (0-10)
USB
- Type: Class compliant USB 2.0, type B
- Supported Operating Systems: Windows 7 or higher Mac OS X 10.6.8 or higher
- Windows driver: Required driver is supplied
- Audio input and output: 2 channels, 24 bit, 48kHz
Amplifier
- Output power: 80 W
- Type: Class- D
- Protection: Short circuit, thermal
Loudspeakers
- Type: 8" dual-concentric, Tannoy
- Impedance: 4 Ω
- Power handling: 240 W
- Top tweeter (switchable on/off): 1"
- Impedance: 4 Ω
- Overall frequency response: 90 Hz - 20 kHz (+/- 3 dB) 60 Hz - 24 kHz (- 10 dB)
- Maximum SPL: 115 dbSPL
Footswitch (supplied) (any switch can operate any footswitchable control)
- Type: FST4
- Switches: Harmony on/off (with LED) Vocal FX on/off (with LED) Guitar FX on/off (with LED) Looper on/off (with LED)
Power Supply
- Mains Voltage: 100-240 V~ 50/60 Hz
- Power consumption: 35 W
- Mains connection: Standard IEC receptacle
- Power Switch: Rocker, rear panel
Dimensions/Weight
- Dimensions: 333 x 383 x 287 mm (13.1 x 15.1 x 11.3")
- Weight: 11.2 kg (24.6 lbs)
Media
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.