ART Pro Audio Pro Channel III Multivoice Channel Strip

SKU: # 809518   |   Model: # PROCHANNELIII   |    Product Reviews0 Reviews  Write a Review

Pro Channel III Multivoice Channel Strip

Additional Photos:

Pro Channel III Multivoice Channel Strip
Pro Channel III Multivoice Channel Strip
Your Price: $449.00 CDN
or from $47 CDN/mo
Notify Me

Buy Online

 Add to Cart

Buy In-Store

The Pro Channel III is a fully-featured channel strip with selectable mic impedance, two compression voicings, and semi-parametric EQ. New to this version, the compressor has both Tube/Opto and FET modes for smooth or punchy dynamic control. The compressor and EQ sections can now be reordered at the touch of a button, and the front panel has been streamlined for a faster, simpler workflow. The mic preamp features a discrete FET input stage and up to 60 dB of preamp gain, with a variable low cut filter to eliminate rumble and tighten bass.

The EQ section offers a switchable low shelf frequency, variable low-mid and high-mid frequencies with over 4 octaves of range per band, and a 12 kHz high shelf. The Pro Channel III is also a versatile instrument DI. Connecting to the front 1/4" input will override the rear XLR input so you can record direct tracks without disconnecting your mic or line signal.

Designed for recording musicians seeking a versatile character preamp with real tube warmth, the Pro Channel III offers the flexibility and fidelity to sculpt and enhance any source.

Features

• Class A FET Microphone Preamp
• Selectable Microphone Impedance
• 1/4" High Z Input on Front Panel
• Compressor and EQ Sections with Switchable Order and Independent Bypass
• Tube/Opto and FET Compressor Voicings
• 4-Band Semi-Parametric EQ and Variable Low Cut Filter
• Insert Point after Preamp Stage
• +4 dBu or -10 dBv Operation
• Universal Internal Power Supply

Specifications

- Frequency Response: 12 Hz - 100 kHz (+0, -1 dB)
- Dynamic Range: 110 dB A-Weighted
- CMRR: 90 dB
- THD: 0.009% (Typical @ 1k)
- Equivalent Input Noise: -128 dBu (Mic / Line), -109 dBu (Instrument), Input Short, Max Gain, A-Weighted
- Maximum Input Level: +22 dBu (+4 dBu Mode), +13 dBu (-10 dBV Mode) Balanced
- Maximum Insert Input Level: +22 dBu (+4 dBu Mode), +13 dBu (-10 dBV Mode) Unbalanced
- Maximum Instrument Input Level: +23 dBu (+4 dBu Mode), +14 dBu (-10 dBV mode) Unbalanced
- Input Impedance: 600Ω / 47 kΩ (XLR), > 800 kΩ (Instrument), 7.5 kΩ (Insert)
- Maximum Output Level: +26 dBu (Balanced), +20 dBu (Unbalanced)
- Output Impedance: 47Ω (XLR)
- Maximum Gain: 40 dB Variable Input Gain, 20 dB Switchable Boost, 15 dB Variable Output Gain, +75 dB Total
- Low Cut Filter: 10 Hz - 250 Hz (Single Pole)
- Compressor Attack: 0.25 ms 100 ms
- Compressor Release: 0.1 s 3 s
- Compressor Ratio: 1.25:1 - 20:1
- Parametric EQ: 40 Hz / 120 Hz (Low), 20 Hz - 2 kHz (Lo-Mid), 200 Hz - 20 kHz (Hi-Mid), 12 kHz (High)
- Power Requirements: 100 - 240 V 50 Hz / 60 Hz 25 W
- Dimensions: 3.5" x 19" x 9.2" (8.9 x 48.3 x 23.3 cm)
- Weight: 10.5 lbs (4.76 kg)

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

Great Additions