EarthQuaker Devices Plumes Transparent Overdrive - Red
Additional Photos:
Product Videos :
Plumes Small Signal Shredder
Plumes is a low to medium gain overdrive based on the trusty lime-green overdrive that has been an industry staple since its inception. This is the kind of overdrive that works in conjunction with a good valve amp to create the warm saturation people like to call "transparent". While this circuit has been the foundation of countless other overdrives available today, we feel the Plumes has a few twists and turns to make it unique enough to stand out.The Plumes does away with the trusted JRC4558 OpAmp and the BJT buffers and replaces them with low noise JFET OpAmps for a more robust and precise signal with a significantly lower noise floor. The 9v power input is internally converted to +/-9v for more headroom and a clarity that is almost three dimensional. The input impedance has been raised to a whopping 10megaohms for a stronger signal with more clarity and chime. Cutoff of the tone control has been adjusted to deliver a more useful range of travel with more booming bass on the low end without sacrificing the cutting midrange and bright top end.
Last, but certainly not least, the Plumes offers three different clipping options to ensure that it will work with a wide variety of gear and playing styles.
Mode 1 is symmetrical clipping utilizing a pair of light emitting diodes; this is the crunchiest setting the Plumes has to offer. When played through a clean amp, itll deliver a reasonable facsimile of that classic crunchy valve amp tone.
Mode 2 is clean boost mode. This eliminates the soft clipping diodes altogether and leaves you with straight OpAmp drive. This is perfect for pushing your clean tone out in front or driving the preamp of an already overdriven amp into tasteful breakup territory.
Mode 3 is an asymmetrical silicon diode arrangement similar to the stock screamer but with more output
and clean clarity; the tone some people describe as "transparent".
Features
• Unique approach to a classic tube-like overdrive circuit offering more headroom, lower noise and far better signal integrity• Features 3 different clipping options: symmetrical LED, asymmetrical silicon, and no diode OpAmp drive
• Reimagined tone control to sculp low end, clear top end, and focused midrange
• True bypass
• Silent relay-based switching
• Features EarthQuaker Devices' proprietary FlexiSwitch Technology
• All-analog signal path
Specifications
- Current Draw: 25 mA- Input impedance: 10M
- Output impedance: 100 ohms
- Dimensions: 4.75" x 2.50" x 2.25"
- Weight: 14 oz
This red version is a Long & McQuade exclusive colour.
Media
Q & A
Reviews
I generally run mine on the first mode, with the drive and tone knobs at about 10:30, and the volume just a hair past 9 (the volume output on this pedal is huge). Sounds good on the clean channel, with maybe just a little more compression than I'd like, but it really makes lead lines and percussive riffs on the OD channel POP!
Contrary to what has been stated, it does not take a battery, and I dont recommend pulling the bottom plate, as it is just plain depressing. The internals are almost entirely made up of a single plastic assembly, that likely takes a trained monkey less than 5 minuets to mount in the housing, and you get a sense of exactly how little that "Made in USA" sticker actually means. You know that old Boss pedal you've owned since 97 and it still works? I wouldnt expect that kind of lifespan out of this one. Unfortunately thats about par for the course now so one cant really dock too many points, especially when it sounds this good, at this price.
Chugging was good on others and was quiet on the Dirty Tree pedal I tried but they all sounded similar in a modern way and I found this kept the tone of your amp more.
Available In Gear Hunter
Sale Price: $115.00
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.