Behringer DUAL-PHASE Authentic Dual Analog Phase Shifter with 12 Opto-Couplers
Additional Photos:
Product Videos :
A mainstay for many musicians since the 1970s, you can hear phasers in countless pop, rock, funk, new wave and alternative tracks over the years. Whether it's dreamy Gilmour-esque soundscapes or super-trippy ring-modulator tones, the Behringer DUAL-PHASE provides possibilities that are simply out of this world.
Recreation Done Right
The DUAL-PHASE is an authentic recreation of the popular phase shifter from the '70s. It features 2 phase shifters, each with their own RATE, DEPTH and FEEDBACK controls, that you can then run in series or parallel. Each phase shifter also allows you to switch the wave shape oscillator between sine and square wave. The DUAL-PHASE brings all the amazing features from the original '70s design, plus a few modern ones, that are sure to enhance your pedal board or synth setup.
Han(ds-free) Solo
What sets the DUAL-PHASE apart from the original is its integrated dual footswitches that you can use to engage or disengage either Phasor A or B - at just the push of a button. Are your hands too busy playing? You can connect an expression pedal or any control voltage source to manipulate the sweep speed of any of the two phasors on the fly as you're deep into your killer solo.
Power and Strength
Running on standard 9-12 volt DC power, the DUAL-PHASE integrates into your setup effortlessly. Also, always stay gig-ready as a rugged and reliable metal construction supplies the DUAL-PHASE with the strength needed to stand up to the rigours of the road - and the heaviest of stomps.
Unlocked Potential
If you're looking for that perfect phaser or just want something new to add to your sound, then the Behringer DUAL-PHASE is the essential tool to unleash your creative beast.
Features
• Classic dual phase shifter for keyboards, guitar, drum machines and other sound sources• Authentic recreation of the popular phase shifter from the '70s
• 12 opto-couplers for deep and natural phasing effects
• 2 independent phasors with Depth and Feedback controls
• 2 independent sweep generators with Rate and Shape controls
• Input selector combines both phasors for creative sound effects
• Sweep and Sync controls allow for a wide selection of modulation sources
• CV input for easy remote control with external devices
• Dual footswitch with true-bypass function for ultimate signal integrity
• Rugged and reliable metal construction
• Runs on Behringer PSU-SB DC power supply (not included)
Specifications
Signal Connections- Input A / B: 2 x 1/4" TS jacks, unbalanced, Impedance: 30 kΩ , unbalanced, Maximum input level: +20 dBu
- Output A / B: 2 x 1/4" TS jacks, unbalanced, Impedance: 470 Ω, unbalanced, Maximum output level: +19.5 dBu
- CV IN: 1 x 1/4" TRS jack, 1 V/oct, CV input range: 0 V to +5 V
Power Supply
- Power supply: External adapter
- Power input: Standard 9 12 V DC, center negative, 700 mA
- Power consumption: 6 W
Dimensions / Weight
- Dimensions: 62.9 x 200 x 174.6 mm (2.48 x 7.87 x 6.87")
- Weight: 1.2 kg (2.7 lbs)
Media
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.