PreSonus Eris Pro 4 Studio Monitor (Single)

SKU: # 799902   |   Model: # 2777500129   |    Product Reviews0 Reviews  Write a Review

Eris Pro 4 Studio Monitor (Single)

Additional Photos:

Eris Pro 4 Studio Monitor (Single)
Eris Pro 4 Studio Monitor (Single)
Sale Price: $279.99 CDN
Original Price: $409.99 CDN
or from $42 CDN/mo
Notify Me

Buy Online

 Add to Cart

Buy In-Store

The Eris Pro 4 reference monitors employ a single point-source coaxial design for clear and accurate sound reproduction. This design provides superior phase alignment between components and delivers a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns - unique advantages for Dolby Atmos immersive rooms as well as stereo mix environments.

The Eris Pro 4 also delivers finely detailed transient response, and stunning dynamics that create a natural and less fatiguing listening experience. A 1-inch ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 4.5-inch woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 80 Watts of power allows the Eris Pro 4 to reach down to 55 Hz.

Acoustic tuning controls let you configure the Eris Pro 4 for your room and three-way Acoustic Space tuning can compensate for the effects of speaker placement against a wall or in a corner.

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything. Lastly, provisions for wall and ceiling mounts make it easy to integrate Eris Pro 4 monitors into any stereo or multi-channel system.

Features

• Single point-source coaxial design for wider sweet spot and better phase alignment
• 4.5" woven composite low-frequency driver
• 1", ultra-low mass, silk-dome, high frequency driver
• Crossover Frequency, 3.4 kHz
• 80W, Class AB amplification
• 55 Hz to 20 kHz frequency response
• 99 dB Peak SPL (@ 1 meter)
• Acoustic Space (flat, -2, -4 dB)
• High Frequency (+6 dB, center 10 kHz, continuously variable)
• Mid Frequency (+6 dB, center 1 kHz, continuously variable)
• Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
• XLR and 1/4" TRS balanced rear inputs
• RCA unbalanced rear-panel input
• Provisions for wall and ceiling mounting (mounts sold separately)
• RF interference
• Output-current limiting
• Over-temperature
• Turn-on/off transient
• Subsonic filter
• Power Saver mode (engages after 40 minutes)

Specifications

Electronics
VOLTAGE: 120V
WATTAGE: 80 Watts
INPUT IMPEDANCE: 10 kΩ

Performance
PEAK SPL: 99 dB (@ 1 meter)

Speakers
CROSSOVER FREQUENCY: 3.4 kHz

Hardware
CABINET MATERIAL: Vinyl-Laminated, Medium-Density Fiberboard
AUDIO CONTROLS: Volume High Frequency (+6 dB, center 10 kHz, continuously variable) Mid Frequency (+6 dB, center 1 kHz, continuously variable)
AUDIO SWITCHES: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
MONITOR INPUTS: 1- Balanced XLR, 1- Balanced 1/4" TRS, 1- Unbalanced RCA
POWER AMPLIFIER TYPE: Class AB

Protections
- RF interference
- Output-current limiting
- Over-temperature
- Turn-on/off transient
- Subsonic filter

Miscellaneous
POWER CABLE: IEC

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
  • USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

Great Additions