Lynx Studio Technologies Hilo Reference AD/DA Converter System with Thunderbolt 3 - Silver
Additional Photos:
Metering
Hilo displays real-time, accurate metering and analysis. Dual horizontal, VU analog, all I/O and spectrum analysis cover all tasks.
Routing
Route anything, anywhere. Set independent input levels, channel modes and mute states for each output. Then set unique level offsets for each output. Truly flexible.
Monitoring
One-to-one monitoring. Independently level-match your 4x4 selected sources, then globally control with the master-volume.
Scenes
Device-wide settings recall. Save custom scenes for different tasks and switch through them in a click.
Settings
No need for extra computer software, change any setting directly on Hilo, such as sample rate, clock source or trims.
Features
• Pristine, independently coupled 2in, 6out, AD/DA conversion with digital expansion up to 32x32• Unique touchscreen interface. Forever upgradable through our free firmware updates
• Future-proof LSlot design with swappable USB, Thunderbolt and DANTE cards
• Real-time meters and analysis tools, hyper-flexible routing and monitor control
• Powered by mains or 9-18v DC battery packs for location recording
• Lynx's class-leading transparent audio quality
• Available in black or silver
Specifications
Line in L/R- THD+N: -114dB @1kHz, -1dBFS, 20kHz filter, +22dBu trim
- Dynamic range: 121dB, A-weighted, -60dBFS signal method
- Frequency response: +0.01dB, 2020kHz
- Crosstalk: -140dB maximum @ 1kHz, -1dBFS signal
- Full-scale trim settings: +0dBV, +2dBV, +4dBV, +6dBV, +18dBu, +20dBu, +22dBu, +24dBu
- Female XLR connectors
Line out L/R
- THD+N: -109dB @1kHz, -1dBFS, 20kHz filter, +22dBu trim
- Dynamic range: 121dB, A-weighted, -60dBFS signal method
- Frequency response: +0.02dB, 2020kHz
- Crosstalk: -135dB maximum @ 1kHz, -1dBFS signal
- Full-scale trim settings: +0dBV, +2dBV, +4dBV, +6dBV, +18dBu, +20dBu, +22dBu, +24dBu
- Male XLR connectors
Monitor out L/R
- THD+N: -107dB @1kHz, -1dBFS, 20kHz filter, volume at max
- Dynamic range: 121dB, A- weighted, -60dBFS signal method
- Frequency response: +0.02dB, 20-20kHz
- Crosstalk: -135dB maximum @ 1kHz, -1dBFS signal
- Output level at max: +24dBu or +10dBu, jumper selectable
- 1/4" TRS connectors
Headphone out
- THD+N: -107dB @1kHz, -1dBFS, 20kHz filter, volume at max
- Dynamic range: 121dB, A-weighted, -60dBFS signal method
- Frequency response: +0.02dB, 20-20kHz
- Crosstalk: -130dB maximum @ 1kHz, -1dBFS signal
- Output level at max: +19dBu
- 1/4" headphone jack
AES/EBU
- Transformer-coupled on XLR connectors
S/PDIF I/O coax
- Transformer-coupled on RCA jacks
S/PDIF I/O optical
- On optical connectors
ADAT I/O
- 8 channels at 48 kHz when selected on optical connectors
Sample Rates
- All standard rates up to 192 kHz using SynchcroLock sample clock generator
Synchronization Sources
- Internal
- External word clock I/O: 75ohm TTL signal on BNC connectors AES/EBU or S/PDIF inputs
Computer Connectivity
- Windows 32-bit and 64-bit drivers provided by Lynx
- Macintosh OS X drivers provided by Apple
LSlot™ Expansion Port
- Supports Lynx LSlot expansion cards with up to 32 input and outputs simultaneously
LCD Display
- 480 x 272 LCD Touch Screen
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Hilo Reference AD/DA Converter System with Thunderbolt 3 - Silver | 791854 |
