Opens in a new window
Avid Pro Tools MTRX II Audio Interface - Base Unit
Additional Photos:
This product is no longer available.
Take on the largest music and audio productions with a powerful studio centerpiece that offers exceptional sound quality, I/O customizability, and extensive routing and monitoring control in one interface. Designed for Pro Tools | HDX and other DAWs, Pro Tools | MTRX II builds on the versatility of its predecessor, providing integrated DigiLink, Dante, MADI, and SPQ Speaker Processing, plus eight card slots to house all the analog and digital I/O you need. Connect anything to everything with the massive 4,096 x 4,096 router. Add 256 channels of native DAW connectivity with the Thunderbolt 3 option. And monitor full Dolby Atmos theatrical monitoring with its expanded 512 x 64 summing mixer.
Musicartists, producers, engineers, and mixers
For music creators and producers, sound is everything. Pro Tools | MTRX II is designed to make your studio sound and function even better. Building on the original Pro Tools | MTRX legacy, MTRX II offers the pristine mic preamps and renowned AD/DA conversion professionals revere, with greater I/O, routing, and monitoring flexibility.
With onboard DigiLink, Dante, and MADI I/Oplus the ability to add up to eight analog and/or digital I/O option cardsyou get more AD, DA, and DigiLink connectivity than before to accommodate any artist, band, or ensemble. Add the new Thunderbolt 3 option to enable 256 channels of low-latency I/O to Pro Tools and other DAWs natively on your Mac or PC. Connect anything to everything with its massive 4,096 x 4,096 router. And calibrate any room in your studio with its built-in SPQ Speaker Processing for optimal monitoring.
Audio postsound designers, re-recording mixers, ADR/Foley engineers
To support highly demanding, highly complex audio production workflows, post professionals need high-quality, highly efficient solutions. Pro Tools | MTRX II is designed to make your facility sound and function even better. Building on the original Pro Tools | MTRX legacy, MTRX II offers the pristine mic preamps and renowned AD/DA conversion professionals revere, with greater I/O, routing, and monitoring flexibility.
With built-in DigiLink, Dante, and MADI I/O, integrated SPQ Speaker Processing room calibration, and eight option card slots, you can configure MTRX II to handle any ADR, Foley, sound design, or re-recording session, replacing multiple single format I/O and monitoring interfaces. You can even connect multiple Pro Tools | HDX systems to a single MTRX II using DigiLink option cards to streamline workflows. Its massive 4,096 x 4,096 routing matrix lets you connect anything to everything across your facility, while the expanded 512 x 64 summing mixer accommodates a full Dolby Atmos theatrical configuration. And with the new Thunderbolt 3 option, you can bring 256 channels of low-latency I/O to Pro Tools and other DAWs natively, enabling remote workflows and more.
Features
• Create music of the highest sound quality with renowned DAD mic preamps and AD/DA converters
• Replace multiple I/O and monitoring interfaces with a single MTRX II, streamlining your studio
• Connect to Pro Tools and other studio devices with built-in DigiLink, Dante, and MADI I/O
• Configure the interface with all the analog and digital I/O you need through eight card slots
• Set up a cost-effective native Pro Tools Ultimate system or other DAW with the Thunderbolt 3 option, enabling 256 channels of low-latency I/O direct to a Mac or PC
• Route audio to and from any connected device in your studio with the 4,096 x 4,096 router
• Calibrate your room for optimal monitoring with built-in SPQ Speaker Processing
• Take remote control of all sources with S6 and other EUCON-enabled control surfaces
• Connect DAWs and devices across your facility with built-in DigiLink, Dante, and MADI I/O
• Configure the interface with all the I/O you need to support multiple audio post workflows
• Achieve impeccable sound transparency with pristine mic preamps and AD/DA converters
• Accommodate a full theatrical Dolby Atmos configuration with the 512 x 64 summing mixer
• Route audio to multiple rooms across your facility with the 4,096 x 4,096 matrix router
• Control Dolby Atmos routing and monitoring across multiple workstations from one interface
• Take remote control of all sources with S6 and other EUCON-enabled control surfaces
• Replace multiple I/O and monitoring interfaces with a single MTRX II, simplifying the workflow
• Set up a cost-effective native Pro Tools Ultimate system or other DAW with the Thunderbolt 3 option, enabling 256 channels of low-latency I/O direct to a Mac or PC
Specifications
Analog and Digital I/O
Configurability: Fully customizable I/O with eight option card slots; install up to eight total
analog, DigiLink, and/or digital I/O cards
Built-in I/O:
- 64 channels of DigiLink I/O (via two 32-channel DigiLink Mini ports) at all sample rates
- 64 channels of MADI I/O at 44.1/48 kHz, 32 channels at 88.2/96 kHz, or 12 channels at 176.4/192 kHz
- 256 channels of Dante I/O at 44.1/48 kHz, 128 channels at 88.2/96 kHz, or 64 channels at 176.4/192 kHz (IP core) Optional I/O (sold separately) 8 Mic/Line Pristine AD input card (DB25)
- 2 Mic/Line Pristine AD input card (DB25)
- 8 Line Pristine AD input card (DB25)
- 8 Pristine DA output card (DB25)
- 64-channel DigiLink I/O card (two DigiLink Mini ports) at all sample rates
- Thunderbolt 3 Option Module (enables up to 256 channels of native low-latency I/O at all sample rates to Pro Tools and other Core Audio DAWs)
- 128-channel IP Audio Dante card with built-in SRC
- 128-channel Dual MADI I/O card
- 8 AES3 I/O card (16 mono channels)
- 2 x 16-channel Dual SDI/HD/3G card with built-in SRC
Monitoring and Routing
Digital cross-point matrix (input to output routing): 4,096 x 4,096
Summing matrix with monitor profiles
- 512 x 64 (supports full theatrical Dolby Atmos mixing)
- Monitor Groups
- Fold Downs
- Group Formats
Room calibration: Built-in SPQ speaker processing with 256 filters on 16 channels; delay management adjustable up to 150 ms per channel.
Additional Specifications
Supported DAWs: Pro Tools, Logic Pro, Cubase, and other Core Audio workstations
EUCON integration: Yes
System sync: Word Clock/video black burst (VBB) via BNC connectors, Dante Sync, Digital Inputs
Supported sample rates: 44.1 kHz384 kHz
Chassis: 2U 19" rack-mountable unit
Musicartists, producers, engineers, and mixers
For music creators and producers, sound is everything. Pro Tools | MTRX II is designed to make your studio sound and function even better. Building on the original Pro Tools | MTRX legacy, MTRX II offers the pristine mic preamps and renowned AD/DA conversion professionals revere, with greater I/O, routing, and monitoring flexibility.
With onboard DigiLink, Dante, and MADI I/Oplus the ability to add up to eight analog and/or digital I/O option cardsyou get more AD, DA, and DigiLink connectivity than before to accommodate any artist, band, or ensemble. Add the new Thunderbolt 3 option to enable 256 channels of low-latency I/O to Pro Tools and other DAWs natively on your Mac or PC. Connect anything to everything with its massive 4,096 x 4,096 router. And calibrate any room in your studio with its built-in SPQ Speaker Processing for optimal monitoring.
Audio postsound designers, re-recording mixers, ADR/Foley engineers
To support highly demanding, highly complex audio production workflows, post professionals need high-quality, highly efficient solutions. Pro Tools | MTRX II is designed to make your facility sound and function even better. Building on the original Pro Tools | MTRX legacy, MTRX II offers the pristine mic preamps and renowned AD/DA conversion professionals revere, with greater I/O, routing, and monitoring flexibility.
With built-in DigiLink, Dante, and MADI I/O, integrated SPQ Speaker Processing room calibration, and eight option card slots, you can configure MTRX II to handle any ADR, Foley, sound design, or re-recording session, replacing multiple single format I/O and monitoring interfaces. You can even connect multiple Pro Tools | HDX systems to a single MTRX II using DigiLink option cards to streamline workflows. Its massive 4,096 x 4,096 routing matrix lets you connect anything to everything across your facility, while the expanded 512 x 64 summing mixer accommodates a full Dolby Atmos theatrical configuration. And with the new Thunderbolt 3 option, you can bring 256 channels of low-latency I/O to Pro Tools and other DAWs natively, enabling remote workflows and more.
Features
• Create music of the highest sound quality with renowned DAD mic preamps and AD/DA converters
• Replace multiple I/O and monitoring interfaces with a single MTRX II, streamlining your studio
• Connect to Pro Tools and other studio devices with built-in DigiLink, Dante, and MADI I/O
• Configure the interface with all the analog and digital I/O you need through eight card slots
• Set up a cost-effective native Pro Tools Ultimate system or other DAW with the Thunderbolt 3 option, enabling 256 channels of low-latency I/O direct to a Mac or PC
• Route audio to and from any connected device in your studio with the 4,096 x 4,096 router
• Calibrate your room for optimal monitoring with built-in SPQ Speaker Processing
• Take remote control of all sources with S6 and other EUCON-enabled control surfaces
• Connect DAWs and devices across your facility with built-in DigiLink, Dante, and MADI I/O
• Configure the interface with all the I/O you need to support multiple audio post workflows
• Achieve impeccable sound transparency with pristine mic preamps and AD/DA converters
• Accommodate a full theatrical Dolby Atmos configuration with the 512 x 64 summing mixer
• Route audio to multiple rooms across your facility with the 4,096 x 4,096 matrix router
• Control Dolby Atmos routing and monitoring across multiple workstations from one interface
• Take remote control of all sources with S6 and other EUCON-enabled control surfaces
• Replace multiple I/O and monitoring interfaces with a single MTRX II, simplifying the workflow
• Set up a cost-effective native Pro Tools Ultimate system or other DAW with the Thunderbolt 3 option, enabling 256 channels of low-latency I/O direct to a Mac or PC
Specifications
Analog and Digital I/O
Configurability: Fully customizable I/O with eight option card slots; install up to eight total
analog, DigiLink, and/or digital I/O cards
Built-in I/O:
- 64 channels of DigiLink I/O (via two 32-channel DigiLink Mini ports) at all sample rates
- 64 channels of MADI I/O at 44.1/48 kHz, 32 channels at 88.2/96 kHz, or 12 channels at 176.4/192 kHz
- 256 channels of Dante I/O at 44.1/48 kHz, 128 channels at 88.2/96 kHz, or 64 channels at 176.4/192 kHz (IP core) Optional I/O (sold separately) 8 Mic/Line Pristine AD input card (DB25)
- 2 Mic/Line Pristine AD input card (DB25)
- 8 Line Pristine AD input card (DB25)
- 8 Pristine DA output card (DB25)
- 64-channel DigiLink I/O card (two DigiLink Mini ports) at all sample rates
- Thunderbolt 3 Option Module (enables up to 256 channels of native low-latency I/O at all sample rates to Pro Tools and other Core Audio DAWs)
- 128-channel IP Audio Dante card with built-in SRC
- 128-channel Dual MADI I/O card
- 8 AES3 I/O card (16 mono channels)
- 2 x 16-channel Dual SDI/HD/3G card with built-in SRC
Monitoring and Routing
Digital cross-point matrix (input to output routing): 4,096 x 4,096
Summing matrix with monitor profiles
- 512 x 64 (supports full theatrical Dolby Atmos mixing)
- Monitor Groups
- Fold Downs
- Group Formats
Room calibration: Built-in SPQ speaker processing with 256 filters on 16 channels; delay management adjustable up to 150 ms per channel.
Additional Specifications
Supported DAWs: Pro Tools, Logic Pro, Cubase, and other Core Audio workstations
EUCON integration: Yes
System sync: Word Clock/video black burst (VBB) via BNC connectors, Dante Sync, Digital Inputs
Supported sample rates: 44.1 kHz384 kHz
Chassis: 2U 19" rack-mountable unit
Q & A
There are currently no questions for this product.
Reviews
There are currently no reviews for this product. Be the first to write one!
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Pro Tools MTRX II Audio Interface - Base Unit | 786343 |
