MOTU M6 6-In/4-Out USB Audio Interface

Audio Quality
Equipped with the same ESS Sabre32 Ultra DAC Technology found in audio interfaces costing thousands, the M6 delivers an astonishing 120 dB Dynamic Range on its main outputs. ESS converters also drive the headphone outputs, which rivals dedicated headphone amplifiers costing hundreds. Ultra-clean preamp circuits produce a measured -129 dBu EIN on the mic inputs. Capture and monitor your audio with pristine clarity.

Speed
The M6 provides best-in-class speed for monitoring live inputs (mic, guitar or keyboard) through your computer, thanks to MOTU's expertly engineered USB drivers, which deliver class-leading, ultra-low 2.5 ms Round Trip Latency (at 96 kHz with a 32 sample buffer).

Metering
When recording and mixing, nothing is more critical than achieving optimum levels. The M6 is the only audio interface in its class with a full colour LCD featuring clear, detailed level meters for all inputs and outputs. Enjoy professional-level volume control and feedback to get your sound just right.

Loopback
The M6 driver provides convenient loopback channels to your host computer, so you can easily route computer output back to the computer, where you can mix it with up to four mics (and/or guitars) from the M6 in your host software for live streaming or podcasting. Streaming and podcasting has never been easier and better-sounding!

A/B Monitor Switch
The M6 is the only audio interface in its class to offer A/B monitor switching. Connect two pairs of monitors and quickly check your mixes on each pair with the push of a button.

Stand-Alone Operation
With the included multi-blade international DC power adaptor connected, you can power the M6 when the computer is turned off (or completely disconnected from the M6). This allows you to monitor any live inputs you may have (mics, guitars, keyboards, etc.) without a host computer or iOS device needed.

Decades of award-winning product engineering for hit songs, mega tours, primetime shows and blockbuster movies goes into every MOTU audio interface.

Features
• Plug-and-play operation
• Hardware (direct) monitoring
• Independent 48V phantom power
• A/B monitor switching
• Stand-alone operation with power adaptor
• Rugged metal construction
• 44.1 to 192 kHz sample rates

Inputs/Outputs
- 4x mic/line/hi-Z guitar inputs
- 2x balanced 1/4-inch line inputs
- 4x balanced 1/4-inch TRS out
- 2x stereo headphone w/volume
- 1x MIDI in/out
- 1x USB-C (compatible with Type A)

Weights/Dimensions
Dimensions: 9.21 x 4.75 x 1.8" (23.4 x 12.0 x 4.57 cm)
Weight: 2.15 lbs (0.975 kg)