Departments > Guitars > Amps > Guitar Amps > Amp Tube Combo > Mesa Boogie > Mark V 1x12 Tube Combo Amplifier

Mesa Boogie Mark V 1x12 Tube Combo Amplifier

SKU: # 775603   |   Model: # 1.MV1.AB.CO   |    Product Reviews1 Reviews  Write a Review

Mark V 1x12 Tube Combo Amplifier
 This product is no longer available.
IT TOOK 40 YEARS of Randall Smith's experience designing high-performance tube amplifiers to get this much TONE under one roof and keep it easy to dial. More than a collection of amplifiers, the MARK V™ is a living history of MESA's® contributions and a tribute to the evolution of electric guitar tone.

The MARK V™ is really a collection of amplifiers. There are far too many circuits and sounds to think of it as merely an amp. It is also a living history of the company. From the groundbreaking MARK I™ that introduced the world to high gain with its cascading preamp, to the Mark II™, the world's first high-gain Dual Mode Channel Switching amplifier and its later siblings that introduced Simul-Class™ power. From the MARK III™ that ushered in the era of 3-channel footswitching performance, to the MARK IV™ which gave all this power individual control, the MARK V is the embodiment of the last 40 years of guitar amp history.

Features
• 9 amplifiers in 1 with 9 patents defining a history of innovation
• 3 footswitchable channels, 3 modes per channel
• Multi-Watt power
• Iconic boogie 5-band graphic EQ
• Legendary Simul-Class power

Specifications
Wattage: Multi-Watt 10, 45 or 90 (Channel Assignable)
Amp Type: Tube
Channels/Modes: 3 Channels / 9 Modes
Mode Voicings styles: Ch. 1 = Clean, Fat or Tweed Ch. 2 = Edge, Crunch or Mark I Ch. 3 = Mark IIC+, Mark IV or Extreme
Graphic Eq Reverb Fx Solo: Graphic EQ, Reverb, FX Loop & Solo
Foot Switchable Functions: Ch. 1, 2, 3, Solo, Reverb, FX Loop, Graphic EQ, Mute
Speakers Impedance: 1 - 8 Ohm Celestion Custom 90 / Total Load = 8 Ohms
Preamp Tubes: 7x Mesa 12AX7
Rectifier Tubes: 1x Mesa 5U4
Power Amp Tubes: 4x Mesa 6L6 (or EL-34)
Speaker Outputs: Two 8 Ohm and Two 4 Ohm
Speakers Impedance: 1 - 8 Ohm Celestion Custom 90 / Total Load = 8 Ohms
Footswitch: Included - 4x4 - 8 Button Footswitch (Bottom Row: Ch. 1, Ch. 2, Ch. 3 & Solo - Top Row: Reverb, FX Loop, EQ & Tuner Mute)
Cabinet Material: Marine Grade, Baltic Birch
Casters: Included - Track-Loc Removable Casters
Dimensions HxWxD: 18 3/4 x 22 3/4 x 11 1/2"
Weight: 65 lbs

Q & A


There are currently no questions for this product.

Reviews


3.23.101.186
Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; [email protected])
Best piece of gear I ever bought 0 of 0 customers found this review helpful
Features  
Quality  
Value  
Overall  
Product Experience   I own it
Closest Store   Victoria, British Columbia
People say its hard to set it up. Its not, there are a load of options though. I never have to fidle with it. Start with an OD pedal Full volume/gain at 20% max. : Channel 1 tweed, Channel 2 crunch (JCM800 circuit, the best tone in the amp IMO), channel 3 MKIV normal mode. Set the EQ to a V.nnFurther, even though it has a great master volume it does benefit from the Mesa Powerhouse Attenuator for bedroom level playing.nnI Sold a dual rectifier to buy it, great choice. I wouldnt trade it for any other amp.
Posted by Des on Oct 10, 2022
Was this review helpful? Vote helpful Vote not helpful flag this review

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
  • USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

Great Additions