IK Multimedia iLoud MTM Immersive Bundle 11
Additional Photos:
With the explosion of spatial audio, studios of all sizes need to implement multichannel monitoring, from 7.1.4 and beyond. iLoud MTMs are the ideal immersive audio reference system, packed with features to take your Atmos® mixes to the next level.
iLoud MTM has a deep low-frequency extension for its size. Being a compact speaker, using its lowest cutoff point requires reducing the maximum SPL. In immersive setups where that lower cutoff isnt needed and speakers are at a greater distance from the mixing position, this isnt ideal.
Proper bass management can help by letting the main and surround speakers focus on the frequency range they do best and letting the subwoofers handle the low-frequency range. Adding a standard 80 Hz (LFE) setting to MTM allows for quick integration with subwoofers at the frequency and slope that are considered the standard when doing bass management in multichannel or immersive setups.
Features
• Built-in acoustic correction tunes to any placement
• Point-source performance regardless of distance
• Controlled dispersion reduces acoustic issues
• Included in Dolby DARDT (Dolby Audio Room Design Tool) for precise installation
• Integrated LFE bass management
• Compact design that's easy to mount anywhere
Specifications
Type: 2-Way/3-speakers bi-amped, digitally controlled studio monitor
LF Drivers: 2 x 3.5" polypropylene custom made mid-woofers
HF Driver: 1" low distortion, back chambered silk dome tweeter
Acoustic Design: DSP tuned bass reflex
Number of amps per speaker: 2
Amplifiers type: High efficiency Class-D
Total power: 100W RMS
LF power: 70W RMS
HF power: 30W RMS
Crossover Type: Linear Phase Variable Order
Crossover Frequency: 3.1kHz
Frequency response: from 50 Hz to 24 kHz +/- 2dB (40 Hz -6dB when uncal, -3 dB when cal)
Phase response: System remains coherent within +/- 15° from 200Hz to 20kHz
Sensitivity at +4dBu: 0dBu signal generates a 100 dB SPL @ 1 m
Sensitivity at -10dBV: -11dBu signal generates a 100 dB SPL @ 1 m
Maximum SPL @ 1m, one speaker playing, on axis: 103dB from 200Hz up sine wave, 95dB at 100Hz sine, 93dB pink noise
Placement setup: Manual switches for LF Extension, LF trim, HF trim, Desk position
LF extension switch: Sets -3dB point of the frequency response at 40, 50, 60 or 80 Hz (LFE)
LF switch: Low shelf, +2dB or -3dB from 100Hz down
HF switch: high shelf, +2dB or -2dB from 8kHz up
Desk switch: -4dB at 160Hz and +1dB at 1.8kHz
Calibration: Fully automatic and built-in digital calibration, microphone included
Measurement Microphone: Omnidirectional, Mems based precision measurement microphone
Full DSP control
Connectors: 1x combo XLR-1/4" TRS balanced input; 1/8" TS ARC microphone input, 1 x USB type-B (service use only), AC POWER socket
Power requirement: 90 to 240 V AC, auto-ranging, 50 or 60Hz, 120W max power consumption
Includes
- 11 x iLoud MTM monitor
- Power cord
- ARC Microphone
- ARC Microphone clamp
- ARC Microphone cable
- Tilting stand
- Horizontal support feet
- Locking key
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| iLoud MTM Immersive Bundle 11 | 775686 |
