ASI Audio 3DME In-Ear Monitor System with Bluetooth
Additional Photos:
Also added is a lower limiter threshold, start up squeal suppressor (useful if the 3DME is turned on prior to inserting the ear pieces), an extended battery life to full eight hours on a single charge and an improved CROS function for Musicians with hearing limits in one ear.
Features
• Active Ambient technology provides controlled 3D ambience with full earphone isolation
• Embedded binaural microphones capture full frequency range, full dynamic range natural ambience with accurate 3D directionality
• Full-range drivers provide reference-quality sound without crossover distortions
• Compact bodypack processing unit combines a monitor mix with the ambient sound
• Patented active signal processing enables distortion-free ambience capture up to 135 dB-SPL
• Monitor Out jack provides for monitoring of the complete reproduced sound, including by the dB Check
• Intuitive smartphone app sets multiple stored body pack processing options
• Selectable ambience level, with left, right adjusted together or separately
• Selectable limiting of maximum average reproduced levels, with left, right thresholds adjusted together or separately, and with the limiting action linked between channels or independent
• Multiband frequency equalization of the reproduced sound, with left, right adjusted together or separately
• Selectable bypassing of all Monitor signal processing, for unimpeded outboard control
• Selectable CROS connection for unilateral hearing loss compensation
• App-activated Seal Test tones enable confirmation of earphone fit and sealing
• Body pack provides ambient level up/down buttons, programmed either for step-wise action or pre-selected levels, for quick in-use adjustment of ambience level
• Body pack has a rechargeable Li-Ion battery and Bluetooth interface
• Body pack provides LED indication of battery state-of-charge, charging status, and USB power
Specifications
Frequency Response: 20 Hz - 20 kHz
Microphone Input Overload: 135 dB-SPL
Maximum Output, 500 Hz: 122 dB-SPL
Microphone Equivalent Input Noise: 27 dBA-SPL
Monitor Equivalent Input Noise: -104 dBV(A) (EQ disengaged), -101 dBV(A) (EQ engaged)
Output Noise: 20 dBA-SPL (EQ disengaged), 23 dBA-SPL (EQ engaged)
Acoustic Insertion gain: Off, -24 dB to +12 dB in 16 steps
Monitor Sensitivity, 500 Hz: 102 dB-SPL for -20 dBV (100 mVrms) input
Monitor Input Impedance: 10 kOhm
Limiter Type: Adaptive attack, average responding, frequency selective
Limiter Threshold: 76 dB-SPL to 104 dB-SPL in 8 steps and Off
Maximum Limiter Gain Reduction: 20 dB
Multiband EQ: +/-12 dB at 60, 140, 330, 770, 1800, 4300, 10 kHz
Latency: 0 (EQ disengaged), 540 usec (EQ engaged)
Operating Time (from full charge): 8 hours
Charge Time (fully depleted battery): 5 hours
Battery State-of-Charge Indication: Four LEDs, with flashing low battery warning
Wireless Connectivity: Bluetooth
Includes
- In-Ear monitors
- Bodypack mixer
- Foam ear tips
- Stereo jumper cable
- USB-C charging cable
- Carrying case
- Earpiece cleaning tool
- Shirt clip
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| 3DME In-Ear Monitor System with Bluetooth | 775464 |
