Lewitt LCT 1040 Ultimate Microphone System

SKU: # 769740   |   Model: # LCT1040   |    Product Reviews0 Reviews  Write a Review

LCT 1040 Ultimate Microphone System

Additional Photos:

LCT 1040 Ultimate Microphone System
LCT 1040 Ultimate Microphone System
LCT 1040 Ultimate Microphone System
Your Price: $4,719.99 CDN
or from $218 CDN/mo
Notify Me

Buy Online

 Add to Cart

Buy In-Store

The LCT 1040 microphone system offers 4 all-analog tube characteristics and a crystal-clear FET circuit to create the perfect sound. The LCT 1040 microphone system gives you the power to create the sound you envision using 4 all-analog tube characteristics and a crystal-clear FET circuit. The detachable remote control allows you to make all settings from your sweetspot.

Features
• Premium Tube and FET microphone in one
• Robust desktop controller with separable power supply for remote console control
• Variable tube / FET setting to blend between the solid state circuitry and the built in tube
• Gold-sputtered 1-inch true condenser capsule
• Four switchable, all analog tube settings: Clear, Warm, Dark and Saturated
• Completely variable Polar Pattern settings from Figure 8 to cardioid to omnidirectional and everything in between.
• Reverse polarity switch to capture rear side of the mic
• Stepped low cut filter with 40, 80 and 120Hz settings.
• Input attenuation with -6, -12 and -24dB pad
• Separate outputs for the total blend and the straight FET info for post creativity.

In the Box
- Tube microphone
- Power supply
- Remote control
- Dual-layer magnetic pop screen
- Shock mount
- Microphone mount
- 11-pin cable
- Mil-spec transport case

Specifications
Type: Condenser, externally polarized
Acoustical operating principle: Pressure gradient transducer
Transducer ⌀: 25.4 mm (1 inch)
Polar patterns: Seamless blend - Omni, wide cardioid, cardioid, supercardioid, figure-8
Frequency range: 20 - 20,000 Hz
Sensitivity: 17.2 mV/Pa, -35.3 dBV/Pa (cardioid)
Self-noise: 10 dB (A) FET, 13 dB (A) tube (cardioid)
Max SPL at 0.5% THD: 137 dBSPL (FET), 0 dB attenuation
Signal/noise ratio: 84 dB (A) FET, 81 dB (A) tube
Dynamic range: 127 dB (A) FET
Low-cut filter: lin 40 Hz (12 dB/oct), 80 Hz (12 dB/oct), 120 Hz (6 dB/oct)
Pre-attenuation: 0 dB, -6 dB, -12 dB, -24 dB
Internal impedance: 83.8 Ω
PSU - supply voltage: 230 V, 50 Hz; 110 V, 60 Hz
Current consumption: 230V - 170 mA, 110V - 240 mA
Connector PSU and remote: Gold-plated 3-pin XLR by Neutrik
Connector: 10-pin audio cable by Hirose Electric
Microphone enclosure: Zinc die cast
Microphone dimensions: 196 x 65 x 45 mm (7.7 x 2.6 x 1.8 inch)
Microphone net weight: 652 g (23 oz)
PSU dimensions: 240 x 170 x 47 mm (9.4 x 6.7 x 1.9 inch)
PSU weight: 2381 g (68 oz)
Remote dimensions: 240 x 163 x 52 mm (9.4 x 6.4 x 2 in)
Remote weight: 1952 g (69 oz)

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
  • USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

Great Additions