Grace Design FELIX2 2-Channel Instrument Preamp/Blender - Silver
Additional Photos:
FELiX2 is a studio quality, 2 channel blending acoustic instrument and mic preamp, designed for working musicians, engineers, sound companies or venues looking for the highest quality solution for amplifying stringed instruments. FELiX2 is built into a roadworthy floor unit chassis of anodized aluminum and steel, portable enough to leave the rack at home but bring studio quality to the stage. With the same stunning audio performance and legendary reliability as Grace Design's pro audio range, FELiX2 brings open, musical and nuanced preamplification to any performance situation.
A powerful eq section allows simple and intuitive tone shaping for even the most unruly of instruments. Each channel's variable high pass filter cuts 12dB per octave from 20Hz to 1kHz, and can also be set as a notch filter for chasing down problem feedback or rumble areas. Parametric mid range controls cover from 70Hz all the way to 8KHz. While fixed low and high controls are carefully voiced for musical shading of bass and treble.
FELiX2 NEW FEATURES INCLUDE:
STEREO OPERATION
• New dual mono or true stereo FX loop allows for independent FX loops on either channel or stereo FX operation with mono or stereo in
• Stereo amp output for connecting to stereo stage amp rig
• Stereo headphone output for stereo headphone personal monitoring bliss
VARIABLE PHASE CONTROL
• Built in variable phase control on channel 2 allows users to adjust mic / pickup blending systems to be perfectly phase coherent
MORE EQ POWER
• HIGH shelving EQ control updated to include 2 transition frequency settings at 1k and 2k, allowing for more flexible high frequency tone control
• New notch filter uses a much higher Q setting for better surgical control of problem frequencies
NEW POWER SUPPLY
• Class II power supply eliminates ground loops when connecting to stage amps and other non-isolated stage equipment
• NOTE: this is now a 2 prong power input
BETTER STAGE MANNERS
• New protective side rails and slightly lower profile knobs to help protect controls from extra left feet and floppy stray instrument cables
CHANNEL 1 BOOST DEFEAT
• Allows the boost circuit to only affect channel 2
Specifications
GAIN RANGE (INPUT TO DI OUTPUT)
CH1 Mic input: 21-62dB
CH1 Instument input: Low Gain: 3-44dB
High Gain: 21-62dB
CH2 Instument input: -1.5-36.5dB
Boost: 0-9dB
NOISE REFERRED TO INPUT CH1 MIC @60DB GAIN 22HZ-22KHZ BW
50Ω source: -35dB, Q>1.0
EQ
Gain: +/- 12dB
Low Frequency: Low Range: 125Hz Shelving
High Range: 250Hz Shelving
Mid Frequency: Low Range: 70Hz 880Hz
High Range: 670Hz 8kHz
Mid Frequency Q: 0.5 5
High Frequency: 2kHz Shelving
OUTPUT NOISE 22HZ-22KHZ BW @ MIN GAIN
CH1 MIC Input (50 ohms) to DI Output:
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.