Sonarworks SoundID Reference for Speakers & Headphones with Measurement Microphone
Additional Photos:
In less than 20 minutes you can calibrate your existing studio speakers with a SoundID Reference measurement microphone and calibrate your existing headphones with more than 500+ headphone calibration profiles already included in the software as ready-to-use presets. With an applied calibration profile the software sets the frequency response target to be completely flat across all audible frequencies so you can make music that sounds great everywhere. You can also now make custom adjustments to the target curve in real-time with the new custom target feature.
With accurate studio reference sound, you can seamlessly switch between speakers, headphones, and rooms. Finally, ensure the continuity of your workflow regardless of distance, your gear, or set-up.
Reliable, consistent, easy-to-use calibration software for all of your audio system
- Ready-to-use headphone calibration for 500+ models
- Accurate speaker measurements and calibration for stereo systems
- 3 filter modes: Zero Latency, Mixed and Linear Phase
- Additional DSP processing controls: Mono, Dry/Wet, and Safe Headroom
- MIDI mapping in the SoundID Reference app for various controls
- User Presets in the SoundID Reference app for switching quickly between predefined output device/channel pair combinations
Control your target sound
- Flat target curve used by 200,000+ music creators globally
- Custom Target: target curve adjustments in real time
- Translation Check: simulate 20+ different devices and environments
High performance and flexibility
- Zero latency plugin DSP
- Near-zero latency system-wide calibration on Windows
- Native support for Apple Silicon (M-series chip devices)
Export your calibration profile to supported hardware
- Apply calibration directly on DSP-enabled hardware
- 10+ device integrations available (audio interfaces, speakers, and more)
What's included
- Activation key for the product license: the product can be activated and used on 3 devices
- SoundID Reference Measurement Microphone with an XLR connection and individual multi-angle calibration profiles (0°; 30°; 90°, also downloadable in TXT format for third-party use)
- Microphone clip for a 21-26mm microphone, with a 5/8" screw-on thread
- SoundID Reference standalone app for Speakers and Headphones (ASIO, WASAPI, APO, HAL)
- SoundID Reference DAW plugin for Speakers and Headphones (AU, VST2, VST3, AAX)
- Averaged profiles for 500+ supported headphone models
System Requirements
- macOS 11 Big Sur, 12 Monterey, 13 Ventura, 14 Sonoma
- Windows 10, 11
- Stable internet connection (offline use not supported)
- Sonarworks supported or Sonarworks individually calibrated headphones
- 2.0 stereo speaker system
- XLR to XLR audio cable
Audio interface requirements during the speaker measurement process
- +48v Phantom Power support
- The same audio interface must be used for input/output
- The audio interface must support and be set to one of the following sample rate formats: 44.1kHz, 48kHz, 88kHz, 96kHz, 192kHz
- The audio hardware setup must consist of a single external hardware device only (additional preamp units are supported)
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| SoundID Reference for Speakers & Headphones with Measurement Microphone | 754381 |
