sE Electronics sE8 Omni Microphone, Matched Pair
Additional Photos:
Product Videos :
Designed for stereo recording, the sE Electronics sE8 omni Matched Pair gives you two pencil condenser microphones with hand-crafted, gold-sputtered condenser capsule. As with all of sE's true condensers, the sE8 omni's ultra-thin gold-sputtered diaphragm delivers an impressive transient response that enables capturing even the smallest of nuances, and the ultra-precision electrode is optimized for superb linearity and natural sound, ensuring a consistently smooth and balanced frequency response.
As one of the quietest microphones on the market - and by far the quietest microphone in its class, the transformerless design enables excellent transparency and clarity. Completely new electronic design also ensures a beyond-the-norm dynamic range and excellent transient response without distortion.
The sE8 omni's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish and gold-plated XLR connector ensures a great look and a loss-free, reliable signal connection for years to come.
Every pair is hand-crafted and carefully selected to ensure the best possible performance. With the lowest noise and highest SPL capability in its class, the sE8 omni is the perfect choice for demanding applications like recording orchestras, ensembles and choirs but equally good for solo instruments, vocals and percussion.
The sE8 omni Matched Pair comes complete with two windscreens to avoid wind noise and two robust mic clips with thread adapters to fit with any mic stand. Moreover, a precision stereo bar and a robust, high-quality metal case is included.
In the Box - sE8 omni (Matched Pair)
- 2x sE8 omni microphone
- 2x mic clip (with thread adapters)
- 2x windscreens
- stereo bar
- robust metal case
Specifications
Capsule Type: Hand-Crafted Small-Diaphragm True Condenser
Polar Pattern: Omnidirectional
Frequency range: 20 Hz - 20 kHz
Sensitivity: 20 mV/Pa (-34 dBV)
Max SPL: 141 / 151 / 161 dBSPL (0/10/20 dB Attenuation pad)
Equivalent noise level: 15 dB(A)
Dynamic range: 126 / 136 / 146 dB (0/10/20 dB Attenuation pad)
Signal to Noise Ratio: 79 dB
Low-cut filter: 80 / 160 Hz, 6 dB/Oct, switchable
Attenuation Pad: 10 / 20dB, switchable
Powering: 48 Volts according to IEC 61938
Electrical Impedance: 110 Ohms
Recommended load impedance: > 1k Ohms
Current consumption: 2.7 mA
Connectivity: 3-pin male XLR connector
Diameter: 23 mm (0.91 in.),
Length (capsule only): 21.5 mm (0.85 in.)
Length (including sE8 preamp): 120 mm (4.72 in.)
Weight (capsule only): 26 g (0.92 oz)
Weight (including sE8 preamp): 141 g (4.97 oz)
Media
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.