Mission Engineering Volume Pedal w/Buffer - Black
Additional Photos:
Using an acoustic instrument like acoustic guitar, violin, or stand-up bass without a pre-amp? No problem. The VM-PRO-PZ version is the only volume pedal in the world specifically designed to work with un-amplified Piezo Electric pickups.
The VM-PRO features high quality onboard buffers. These buffers help maintain the frequency response when using long cable runs and multiple effects. In other words: No tone suck! If youve ever experienced reduced top end and a general loss of sparkle from your instrument plugged into a pedal board, then a good quality buffer at the start of your signal chain can help. The Mission buffer is a top of the line audiophile grade circuit, and being integrated right into the volume pedal, you can avoid having to use a separate device, reducing the cable count and saving space and weight on your pedal board.
VM-PRO is designed for flexibility, and includes switchable options that let you tune it to your specific requirements. You can place the volume pedal anywhere in the signal chain without mismatch issues, so you can place it first and use it for swells and clean/boost control, last as a master volume, or anywhere in between.
A selectable output impedance lets you use the volume pedal with vintage fuzz and other devices that would normally be incompatible with a volume pedal. Placing the VM-PRO in front of a fuzz allows you to roll back the volume to clean up just like using the volume knob on your guitar, but with more precise control. A switchable gain stage lets you set the pedal for use with high output active pickups without clipping, and the unique Mission Sparkle switch restores some of the top end brightness thats typically lost as you roll back the volume.
Last, but by no means least, is is completely isolated secondary output that routes an additional, unaltered signal from the pedal. Primarily intended for use as a tuner out, use of this output wont cause any signal loss on the main output regardless of what is connected to it, as the two outputs are completely isolated inside the pedal. The tuner out remains active independent of pedal position so you can tune silently, at full volume, or anywhere in between without the tuner sucking your tone.
The Secondary out can also be used for advanced studio and recording functions such as re-amping and side chaining. Use it to send a dry signal direct to a mixing desk or DAW, or split the signal between two different effect chains/amps to create ambient stereo effects.
Features:
- Works with many instruments including electric, acoustic-electric guitars and basses including 7 string guitars and 5 and 6 string basses, keyboards, and instrument microphones.
- Switch selectable input for use with passive or active pickups.
- Switch selectable output impedance for use with vintage fuzz and similar pedals.
- Sparkle switch restores brightness when rolling back volume.
- On board professional quality buffer and line driver for reliable interfacing, and maintaining frequency response with long cables and complex pedal boards.
- Isolated secondary/tuner out.*
- Road ready all metal chassis in choice of black or red finishes.
The VM-PRO is powered by an included 9V internal battery accessible from a battery door on the bottom plate for easy changing. It can also be powered by an external power supply. The power circuit is very flexible and can accept between 9 and 18VDC supplies. Using a higher output supply will increase the headroom which may be useful for very high level inputs. The VM-PRO uses a standard barrel connector and is protected against reverse voltage.
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Volume Pedal w/Buffer - Black | 403498 |
