Yorkville Sound Audiopro 3600-Watt Power Amplifier
Additional Photos:
An impedance mode switch on the back panel of the amplifier allows the user to select full output power into either a two or four ohm load for maximum application flexibility. This means this compact two rack space amplifier can deliver up to 3600 watts of clean, pure power into either 4 or 8 ohm loads (bridged), making it a perfect solution for virtually any touring live sound, club system or installation.
The internal signal path has been optimized and a toroidal transformer is used in the AP4K design - both serving to reduce hum and noise in practical real-world applications. It's three-tier Class-H design approaches efficiency normally associated with Class-D technology; yet provides the superior transient response and low distortion of the best analog designs.
Features
• Delivers 1800 watts per channel into either 2 or 4 ohm load
• (3600 watts bridged into 4 or 8 ohms)
• Proven Ultra Reliable Class-H Design
• Easily Handles Reactive Phase Shifted Loads
• Advanced Protection Schemes Including DC Current, Load, Thermal & Breaker Protection
• Transparent User-Defeatable Peak Limiter Circuits
• Soft Turn-On Circuit Protects Speakers and Prevents Nuisance Breaker Tripping During Power Up
• Concise Front Panel Metering and Status LED's
• Speakon and Binding Post Outputs
• Balanced XLR and -inch TRS Inputs
• Removable Standard 3-Prong Power Cord
• All-Steel Chassis Construction
• Made in Canada
Specifications
Amplifier class: Class-H
Continuous Average Power @ 8 Ohms BCD (Watts): 600 (x2)(2ohm mode)/1000 (x2)(4ohm mode)
Continuous Average Power @ 4 Ohms BCD (Watts): 1000 (x2)(2ohm mode)/1800 (x2)(4ohm mode)
Continuous Average Power @ 2 Ohms BCD (Watts): 1800 (x2) (2ohm mode)/ NA in 4ohm mode
Continuous Average Power Bridged BCD (Watts): 3600 @ 4 ohms /3600 @ 8 ohms
Burst Average Power @ 8 Ohms BCD(Watts): 1000 (x2)(2ohm mode)/1800 (x2)(4ohm mode)
Burst Average Power @ 4 Ohms BCD (Watts): 1800 (x2)(2ohm mode)/3500 (x2)(4ohm mode)
Burst Average Power @ 2 Ohms BCD (Watts): 2500 (x2)(2ohm mode)/ NA
Burst Average Power Bridged BCD (Watts): 5000 @ 4 ohms / 7000 @ 8 ohms
Frequency Response (Hz, +/- 1dB): 20-20,000
Hum and Noise (un / Aweighted -dB): -100/ -115
THD -1kHz- 4 OHMS: 0.01
THD - 20Hz-20kHz, 4 Ohms: less than 0.1%
Slew Rate (V/uS): 25
Slew Rate Bridged (V/uS): 50
Damping Factor (30 Hz - 400 Hz @ 8 Ohms): 600
Crosstalk (1kHz / 20Hz-20kHz): -75 / -60 dB
Input Impedance - Bal/Unbal (Ohms): 10,000/5,000
Input Sensitivity (Vrms) For Full Power Out: 1.0V (2ohm mode) / 1.4V(4ohm mode)
Max Voltage Gain (dB): 36
CMRR @ 60Hz (min/typ): 48/56 dB
Stereo / Bridge (S/B): S/B
Protection: DC, Load, Thermal
Limiter: Peak
High Pass Filter: 50Hz, 18dB Octave
Cooling: Internal Fans
Cooling Path: Front to Rear
Inputs - XLR: 2
Inputs - 1/4" Jacks: 4
Outputs - Speakon 4-pin: 2
Outputs - Binding Post: 2
Power Consumption (typ/max): 1130/1800 Watts
Rack Spaces: 2
Transformer Type: Toroidal
Exterior Finish: Baked, Black Painted
Dimensions (DWH /D fm ears, inches): 16.5 x 17.3 x 3.5 x 14.9
Dimensions (DWH /D fm ears, cm): 41.5 x 43.9 x 8.9 x 37.85
Weight (lbs / kg): 41 / 18.5
Q & A
Reviews
Rental rates
This product is normally available for rental. Please contact your preferred location for further information.
1 Day from $24.00
1 Week $48.00
1 Month $96.00
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Audiopro 3600-Watt Power Amplifier | 400555 |
