Audient iD4 MkII 2x2 High Performance USB-C Audio Interface
Additional Photos:
Product Videos :
The professional sound you deserve
Designed to take your recordings to the next level in every way, the iD4 (MKII) 2in | 2out Audio Interface delivers professional audio performance in a compact and modern desktop package, giving you everything you need to make studio quality recordings at home.
The Audient mic pre is a high grade hybrid discrete and op amp design that delivers a clean, accurate and detailed translation of your source.
With a noise floor 30,000 times quieter than the signal level your recordings will be captured with stunning clarity.
Equipped with both a jack and mini jack connection and a powerful headphone amp capable of driving headphones up to 600Ohms, iD4 is ready to take on the most demanding recording sessions.
Designed to replicate the input stage of a classic valve amplifier, iD4's harmonically rich JFET Instrument Input is the perfect sonic foundation for your guitar or bass.
Delivering true phantom power over USB, iD4 will make sure your mics get the power they need to ensure optimal sonic performance.
Features
- 1 x Audient Console Mic Pre
- Class Leading Converters
- 1 x JFET Instrument Input
- 2 x Line Outputs
- Dual Headphone Outputs
- ScrollControl
- Speaker on/off Button
- Monitor Mix and Pan
- True Phantom Power over USB
- USB3.0 Bus Powered
- iOS Compatible
- 24bit/96khz
- All Metal Design
- Free Software + Plugins, including Cubase LE and Cubasis LE for iOS
Specifications
D.I / Instrument Input
RANGE: 40dB
LINEUP: 12dBu = 0dBFS
THD+N @ 0dBu: 0.1%
SNR: 100dBu A-Weighted
FREQUENCY RESPONSE MIN GAIN +/-0.5dB 10Hz to 20kHz
Microphone preamplifier
GAIN RANGE: 58dB
LINEUP: 12dBu = 0dBFS
MIC MAX INPUT LEVEL: 12dBu
MAX INPUT LEVEL: 21dBu
INPUT IMPEDANCE (Mic): 2.8k
INPUT IMPEDANCE (Line): > 8k
THD+N @ 0dBu 0.00170%
THD+N @ 0dBu MAX GAIN: < 0.04%
SNR: 101dBu A-Weighted
EIN: 129dB A-Weighted
CMRR @ 1k: > 75dB
FREQUENCY RESPONSE MIN GAIN +/-0.5dB 10Hz to 40kHz
Analogue to Digital Converter
THD+N @ -1dBFS: 0.001%
DYNAMIC RANGE: 120dB A-Weighted
FREQUENCY RESPONSE: +/-0.5dB 10Hz to 40kHz
Line Outputs (DAC)
LINEUP:12dBu = 0dBFS
THD+N @ -1dBFS:0.0006%
DYNAMIC RANGE:125.5dB A-Weighted
CROSSTALK: > 120dB
FREQUENCY RESPONSE: +/-0.1dB 10Hz to 40kHz
1/4" TRS JACK: Tip (Left), Ring (Right) & Sleeve (Shield)
Headphone Outputs
LINEUP: 18dBu = 0dBFS
THD+N @ -1dBFS: 0.0009%
DYNAMIC RANGE: 125.5dB A-Weighted
CROSSTALK: > 116dB
FREQUENCY RESPONSE: +/-0.1dB 10Hz to 40kHz
MAXIMUM LEVEL @ 30R: 2.59V Peak, 1.827V RMS, 223mW
MAXIMUM LEVEL @ 62R: 4.18V Peak, 2.95V RMS, 280mW
MAXIMUM LEVEL @ 600R: 7.72V Peak, 5.46V RMS, 100mW
1/4" TRS JACK: Tip (Left), Ring (Right) & Sleeve (Shield)
USB-C High Speed
BUS POWER:
MIN REQUIREMENT: 0.9A @ 5V >= USB 3.0 Port
MAX REQUIREMENT: 1.5A @ 5V USB-C: Provides higher headphone outputs levels
No. of INPUT CHANNELS: 2 (2 Analogue)
No. of OUTPUT CHANNELS: 2 (2 Analogue)
Media
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.