Yorkville Sound AP818 800-Watt 18- Channel PA Console

SKU: # 55267   |   Model: # AP818   |    Product Reviews0 Reviews  Write a Review

AP818   800-Watt  18- Channel PA Console

Additional Photos:

AP818   800-Watt  18- Channel PA Console
 This product is no longer available.
The Canadian-made AP818 is ideal for all PA applications including live music, live theater and DJ usage. Offering maximum clarity, low noise, versatility and professional features, the AP818 then adds durable reliability to its impressive list of attributes.

*************

With 800 Watts (400 Watts/ch @ 4 Ohms), the AP818 stereo powered console mixer delivers the power and features required for demanding, professional performance applications.

Uniquely engineered, internal SilentFan cooling provides quieter performance. Channels 1 to 14 are mono with XLR and 1/4" phone jack inputs, while channels 15/16 and 17/18 are configured in stereo with cueing switches and RCA inputs.
An optional BAG-7 gig bag is also available.

Specifications:
Number of Channels - 18
Mono Channel EQ(ch.1 to 14) - Low, Mid, Mid Sweep & High
Stereo Channel EQ (ch. 15/16 & 17/18) - Low, Mid, High
Channel Effects - All Channels
Monitors Effects - Yes
Balance Controls - Channels 15/16 & 17/18
Pan Controls - Channels 1 to 14
XLR (bal) Inputs - Ch. 1 - 8
1/4" Inputs - Ch. 1 - 12
RCA (unbal) Inputs - 2 Stereo Sets
Clip /Mute LED - All Channels
Phantom Power -24 V + LED indicator
VU Meter - 2 x 5 LED
Headphones - Cue & Volume
Internal Effects - Digital 16 Bit; 255 Effects
Effects Send - 1 Internal/External
Reverb / Effects Footswitch Jack - Master on/off
Mic Input Max Gain to Line Out(dB) - +63
Line Input Max Gain to Line Out (dB) - +45
Master EQ - Graphic Mono 9 Band 63 Hz - 16,000 Hz
Master EQ - Graphic Mono 9 Band 63 Hz - 16,000 Hz
Main Line Outputs - 1/4 inch TRS, 2 pre & 2 post EQ
A & B Amp Isolating Line Inputs - 2 x 1/4 inch TRS
Monitor Line Output - 1/4 inch TRS
Amp A & B Speaker Outputs - 1/4" Jacks x 2/amp
Mixer Signal to Noise Ratio (dB) - greater than 100
Mixer Frequency Response (All EQ Flat,+/-2dB)- 20-20kHz
Input Referred Noise to line out @ 150 Ohms (dBv) - 117
Mixer THD (Main out w/ -10dB input) - less than 0.03%
Amp A & B Power Output @ 8 Ohms (0%1"THD, 1kHz) - 240
Amp A & B Power Output @ 4 Ohms - 455
THD @ 1kHz (dB) - less than 0.03%
THD @ 20Hz-20kHz (dB) -less than 0.1%
Hum and Noise (un/Aweight -dB) - -98
Typical crosstalk @ 1 kHz (dB) - -66
Input Impedance - Bal/Unbal (Ohms) - 22,000/12,000
Input Sesitivity (Vrms Sine) - 1.47 V
CMRR @ 60Hz (min/typ) - 54 dB / 66 dB
Max Votage Gain (dB) - 29
Power Consumption (typ/max) - 660 VA/1200 VA
Protection - Thermal, Load & DC
Cooling- Variable Speed DC Fan
Transformer Type - Toroidal
Finish- Scratch Resistant Vinyl Coating
Chassis Construction - Steel
Rackmountable -Yes using optional RK812 Kit
Amp Mode Switch - stereo mains/mono main & monitor.
Dimensions (DWH, inches) - 25.3 x 18 x 5.5
Dimensions (DWH, cm) - 64.3 x 45.7 x 14
Weight (lbs/kg)- 43/19.5

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Rental rates


This product is normally available for rental. Please contact your preferred location for further information.

1 Day from $20.00

1 Week $40.00

1 Month $80.00

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
  • USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.