Samson RL115A Active Loudspeaker
Additional Photos:
In a Class by Itself
Class D amplification provides maximum power from a lightweight and efficient chassis. Its bi-amp design hosts two separate power amps for highs and lows that greatly improves the sound. The system produces 800 Watts of Peak Power delivering clean audio without any distortion. Internal circuitry provides thermal and overload protection to keep everything running smoothly.
Loud and Proud
The RL115A's speaker features a 15" extended range low frequency driver for deep, rich bass tone with a tight and punchy low end. A 2" voice coil maximizes heat dispersion for higher efficiency and sound accuracy. The 1" neodymium high frequency driver is equipped with a 1" voice coil for smooth, crisp highs, while its wide dispersion horn provides linear frequency response and excellent coverage in any venue.
All Are Welcome
The RL115A features an onboard mixer with an XLR-1/4" combo jack complete with a gain-matching mic/line switch to accommodate nearly any input source. A USB wireless port is also included for use with Samson XPD wireless microphone systems (not included), making it perfect for conferences, lectures, rallies, fitness classes, and entertaining. Switching on the Contour (EQ) circuit allows you to customize your sound for any application or environment.
Born to Run
Impact-resistant polypropylene cabinets equipped with perforated metal grilles provide added protection to the RL115A speakers themselves. Its versatile design allows the option for either vertical (front of house) or horizontal (monitor) use. Three easy-carry handles provide easy transport and placement. And a convenient 1 3/8" pole-mount socket is built right in.
Details
• Output Power: 800 Watts Peak (700 LF + 100 HF), 400 Watts RMS (350 LF + 50 HF)
• Max. SPL (1M): 122dB
• Frequency Response: 50Hz 20kHz
• Low Frequency: 15 (381mm) Woofer w/2 (50.8mm) Voice Coil
• High Frequency: 1 (25.4mm) Neodymium Driver w/ 1 (25.4mm) Voice Coil
• Crossover Frequency: 2.5kHz @ 12dB/Oct
• Horn Coverage: 90H x 60V
• Inputs: Balanced XLR-1/4 Combo, USB XPD Wireless
• Output: Balanced XLR Line Output
• Contour: Equalization 100Hz & 12kHz Boost
• Electronic Protection: Thermal, Overload, Analog (Optical) Limiter, Compressor
• AC Connector: 3-pin IEC 250 VAC, 20 A male
• Power Consumption: 420 W
• Fuse: 110V-120V T4A AC250V; 220V-240V T2A AC250V
• Enclosure: Polypropylene
• Grille: Full metal perforated
• Handles: Two side, one top
• Monitor Angle: 45
• Stand Mounting: 1-38 (35mm) Pole Mount Receptacle
Dimensions: (LxWxH) 15.2 x 14 x 24.9, 386mm x 356mm x 631.5mm
Weight 32.6lb / 14.8kg
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| RL115A Active Loudspeaker | 739082 |
