Bettermaker Analog Stereo VCA Bus Compressor

SKU: # 741336   |   Model: # BUS COMPRESSOR   |    Product Reviews0 Reviews  Write a Review

Analog Stereo VCA Bus Compressor

Additional Photos:

Analog Stereo VCA Bus Compressor
Analog Stereo VCA Bus Compressor
Analog Stereo VCA Bus Compressor
Your Price: $3,755.00 CDN
or from $174 CDN/mo
Notify Me

Buy Online

 Add to Cart

Buy In-Store

Bettermaker® Bus Compressor is for those who seek high quality stereo VCA compression with the convenience of fast and precise recall and automation. The bus compressor offers 100% analog signal path, Dry/Wet mix, sidechain with HPF, with hardware insert and preview function, adjustable THD saturation and more. All this with high analog quality and patented recall with a speed of a native plugin.

The digital section of the Bus Compressor is based around high speed, 32-bit micro-controller, with dedicated firmware programmed into its memory (with the possibility of updating the firmware via USB connection). It's responsible for controlling the VCA, the user interface, presets management, audio measurement, USB connectivity and other Bus Compressor functions.

The use of separate ground planes for the analog and digital sections results in perfect noise isolation between these two worlds. The Bus Compressor's high quality switching power supply, designed by Bettermaker, provides low hoise, hum free power to all analog and digital components.

The front panel of the Bus Compressor is build around an eye-catching LED matrix display, that allows you to monitor almost all functions available on the device as well as input/output levels and amount of gain reduction applied by the compressor.

Key Features
• Advanced analog stereo VCA compressor with PEAK/RMS detection
• All parameters are digitally controlled via front panel and/or DAW (with dedicated plugin)
• Dry/wet MIX control for parallel compression
• Sidechain high pass filter with hardware insert and preview function
• Adjustable THD for harmonically rich sound
• On-board measurement of PEAK/RMS levels
• 100% analog audio signal path
• Total recall and A/B comparison from your favourite DAW
• LED matrix display and six encoders with push-button action for ease of control
• USB connectivity with MAC/PC

Technical Specifications
Frequency response: 10Hz to 22kHz (+/- 0.2 dB)
Dynamic range: 106dB (+23dBu, 22kHz BW)
S/N ratio: 87dB (A-weighted, +4dBu, 22kHz BW, unity gain)
Crosstalk: -83dB @ 1kHz, +18dBu, channel-to-channel
CMRR: max 85 dB @ 3 kHz, min 52 dB @ 20Hz, 20 kHz BW
THD: 2nd: < 0.06%, 3rd: < 0.01%; 4th: < 0.006%; (+4 dBu, 20-20 kHz, unity gain, THD and CLIP disabled)
Balanced stereo input (XLR), 23dBu max input level (THD < 0.2%)
Balanced stereo output (XLR), 23dBu max output level (THD < 0.2% into > 2kohm)
Input impedance (differential): 48kΩ (for balanced signal)
Output Impedance: 50Ω + 50Ω (electronically balanced)
1U enclosure, 230mm deep (Bus Compressor)
universal 100 240V power supply designed by Bettermaker
Maximum power consumption: 25W

Threshold: -35dB / +5dB (40dB range)
Attack: 0.1 60 ms
Release: 10 2000 ms
Ratio: 1.5, 2, 4, 6, 10:1
Knee: 20dB
Output: -5dB to +15dB
Sidechain HPF: off 370Hz
Sidechain Feed: Forward
Sidechain Type: PEAK/RMS

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

Great Additions