Samson RS112A 400W 2-Way Active Loudspeaker with Bluetooth Connectivity
Additional Photos:
Power and Drive(rs)
With a bi-amped design (separate amplifiers for high and low frequencies), the RS112A offers greater efficiency, more accurate sound and an impressive 400 watts of power. This power is realized through a 12" extended range woofer with a large 2" voice coil that provides excellent coverage and clarity, while keeping the low-end tight and punchy. The 1" tweeter adds smooth, crisp highs to produce a balanced audio image.
Mix Matters
The RS112A speaker features an onboard mixer equipped with two selectable mic/line XLR1/4 combo input channels with variable compressor controls. An additional channel offers an 1/8" line level input, Bluetooth connectivity and a USB Wireless port for use with Samson XPD wireless microphone systems (sold separately). The RS112A speaker includes an XLR Mix output for daisy chaining additional speakers to expand your sound system.
Protection and Placement
In addition to its high-impact polypropylene cabinet construction, the RS112A is fitted with a full metal grille that provides maximum component protection. The cabinet offers horizontal/angled floor monitor positioning, a 1 3/8" pole mount for stand placement and four M10 fly points for permanent speaker installation. In addition, the RS112A includes convenient top and side carry handles for easy transport.
Features
• 2-way active loudspeaker
• 400 watts Peak/200 watts RMS of power
• 12" extended range low frequency driver with 2" voice coil
• 1" high frequency driver
• Two selectable Mic/Line XLR-1/4" combo inputs with variable compressor controls
• Bluetooth connectivity to connect wireless music sources
• 1/8" (3.5mm) Aux input for stereo line level devices (MP3 players, keyboards, etc.)
• XPD Wireless port for use with Samson XPD Series USB Digital Wireless Systems (sold separately)
• Independent volume controls on all channels
• XLR Mix output for daisy chaining additional speakers
• Signal/Limit indicator
• Solid polypropylene enclosure with impact resistant design
• Three large ergonomic carry handles
• Integrated 1 3/8" speaker stand mount
• Four M10 fly points
• Horizontal/Angled floor monitor positioning
• Full perforated metal grille protects all speaker components
Specifications
Output Power @ 1kHz: 400W Peak, 200W RMS
LF Driver: 12" woofer, 2" voice coil
HF Driver: 1" tweeter
Frequency Response: 55Hz20kHz
Max. SPL (1M): 115dB
Inputs: 2x XLR-1/4" combo Mic/Line, 1/8" (3.5mm) Aux, XPD Wireless
Outputs: XLR Mix output
Compressor: Variable (Threshold/Ratio)
Bluetooth: Bluetooth 4.0, A2DP
Construction: Polypropylene, metal grille, 3x handles
Mounting Method: 1 3/8" pole mount, monitor angles
Product Dimensions: 26" x 12.2" x 15" (66 x 31 x 38.1 cm)
Product Weight: 35 lb (16 kg)
Q & A
- asked on Feb 24, 2024
- answered by Ron Elliott, Moncton, New Brunswick
- asked on Apr 14, 2024
- answered by Gary Joynes, Edmonton South, Alberta
Reviews
Available In Gear Hunter
Sale Price: $339.00
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| RS112A 400W 2-Way Active Loudspeaker with Bluetooth Connectivity | 738194 |
