Lauten Audio Eden LT-386 Large Diaphragm Vacuum Tube Vocal Microphone
Additional Photos:
• Designed for the most discerning ears in the business
• Multi-voicing® switch for three distinct timbres
• Vocal shaping high-pass filter
• Kick-drum shaping high-pass filter
• Switchable patterns on the microphone
• Stunning appearance, built to the hilt, refined character
MULTI-VOICING® TECHNOLOGY
Multi-voicing is a process that can only be achieved inside the microphone. This is Lauten Audio's proprietary technology that uses three separate signal paths for unique frequency shaping. The multi-voicing functions in the Eden LT-386 are individually designed and tuned for this microphone. The three multi-voicing modes are; Forward, Neutral and Gentle. The Gentle position provides maximum control of bright or peaky sources or to achieve a warm, vintage vibe. Select one of the high-pass filters, and you'll think you have a completely different microphone. Neutral offers an even pleasant response with good control over S's, and starts moving more toward a modern microphone, yet still wrapped in a vintage vibe. Lastly Forward opens up the microphone for that familiar "air" of classic microphones from the past with our the modern touch that Lauten Audio is known for.
VOCAL AND KICK SHAPING
The Eden LT-386 has a unique 2-stage, high-pass filter called "Kick-shaper" and "Vocal-shaper". These filters are uniquely tuned to shape the low-end for two of the most commons trouble areas. In its default position, there is no high-pass. Stage one, or the middle position, is the "Kick-shaper"; as you can probably guess, this was specifically designed for kick-drums. With its very steep cut of the low-end, it removes excess boominess that might actually take away from a big sounding kick. But feel free to try it on toms, vocals, guitars etc. Moving the switch to stage 2, or the bottom position is the "Vocal-shaper" which is designed to clean up your vocal tracks for an amazingly smooth and classic sound. Of course, it will be useful for many more sources as well.
PATTERN SWITCH ON MICROPHONE
The polar pattern switch gives recordists the option of choosing between Cardioid, Omnidirectional or Figure-8 polar patterns. Having the pattern switch on the microphone rather than the power supply - a feature that is inspired by the most admired classics - allows you or the artist to quickly and easily make your selection.
Features and Specifications
• Extra-large 38mm dual-diaphragm capsule
• Cardioid, Omni & Figure-8 polar patterns
• Multi-voicing® technology (3 distinct timbres)
• Kick-shaper
• Vocal-shaper
• Detachable Shock Mount
• Special ceramic coating
• Custom wound output transformer
• Vacuum tube, transformer balanced
• Type: Pressure gradient condenser
• Polar Pattern: Cardioid, Omnidirectional & Figure-8
• Freq. Response: 20Hz-20KHz
• Dynamic Range: 120dB minimum
• Impedance: < 200 ohms
• Max. SPL: 0.5% THD @1000Hz: 130dB
• Self-noise level: < 12dB(A)
• Sensitivity: 16mV/Pa OR -36 +/-2dB 0dB=1V/Pa 1KHz
• Special Features: 3 unique timbre settings
• Special Features: Kick-shaper & Vocal-shaper
• Connector: 5-pin XLR (PSU to microphone) and 3-pin XLR (PSU to Preamp)
• Power: Custom power supply (100v to 240v compatible)
Included Accessories: Custom Cable, Shock mount, Power Supply, Hard Case
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.