Audio-Technica VM95-SP Dual Moving Magnet Cartridge

This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws - no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

Features
• VM95 Series dual magnet cartridge with 3.0 mil conical stylus for 78 RPM records
• Aluminum cantilever
• Durable low-resonance polymer housing
• Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws (included) no nuts or washers required
• Compatible with any AT-VMN95 replacement stylus

Specifications
Frequency Response: 20-20,000 Hz
Channel Separation: NA
Vertical Tracking Angle: 23
Vertical Tracking Force: 4.5-5.5 g (5.0 g standard)
Stylus Construction: Bonded round shank
Recommended Load Impedance: 47,000 ohms
Coil Impedance: 3.3 k ohms (1 kHz)
DC Resistance: 485 ohms
Coil Inductance: 550 mH (1 kHz)
Recommended load capacitance: 100 to 200 pF
Output: 2.7 mV (1 kHz, 5 cm/sec.)
Channel Balance: 1.5 dB (1 kHz)
Stylus Shape: 3.0 mil conical
Cantilever: Aluminum pipe
Static Compliance: 12 x 10-6 cm/dyne
Dynamic Compliance: 2 x 10-6 cm/dyne (100 Hz)
Mount: Half-inch
Weight: 6.1 g (0.22 oz)
Dimensions: 17.2 mm x 18.9 mm x 28.3mm (0.68" x 0.74" x 1.20")
Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers