Opens in a new window
Benchmark Media NL2 to Banana 2-Pole Speaker Cable - 25'/7.6m
Additional Photos:
2 models to choose from:
Compatible with NL2 and NL4 Jacks
These 2-pole cables connect to the +1 and -1 pins in an NL2 or NL4 jack. The +1 pin connects to the red locking banana plug. The -1 pin connects to the black locking banana plug.
The plug used on this cable is a two conductor Neutrik NL2 SpeakON™ connector. It is compatible with the four-conductor NL4 jacks on the back of the AHB2 power amplifier. The NL4 jacks provide two additional contacts (+2 and -2) but these extra contacts are only needed for some bi-amp applications. Use this 2-pole cable for stereo and bridged mono applications.
Top-Quality Connectors
In our lab tests we have found that heavy-duty 40-amp SpeakON™ connectors consistently outperform spade lugs, pins, and banana plugs. The SpeakON™ connectors provide a reliable low-impedance connection that can withstand high-currents. Of the more traditional speaker connectors, we have found that locking banana plugs provide the next best connections. In contrast, spade lugs and pins often provide poor connections. Spring-type (non-locking) banana plugs almost always provide poor connections and should be avoided.
The Benchmark AHB2 power amplifier is so clean that poor speaker connections can easily create more distortion than the entire power amplifier. We have seen this many times in the lab. The effects of poor speaker connections can easily be measured when testing the AHB2 power amplifier. We have learned that we cannot accurately measure the AHB2 unless we use SpeakON™ connectors or high-quality locking banana connectors.
SpeakON™ connectors also provide convenience and safety. No speaker connector is easier to use. They cannot short out, and they cannot give you a shock.
Specifications
11 AWG effective wire gauge (pair of 14 AWG conductors)
4-wire Star-Quad Configuration
Polyethylene Dielectric for low capacitance and improved frequency response
DC Resistance < 2.6 Ohms / 1000 ft.
Capacitance: 45 pF / ft.
Diameter: 0.421 in.
Super flexible heavy-duty jacket
Heavy-Duty 40 Amp Locking Neutrik NL2FX Connectors on one end
Heavy Duty Locking Banana Plugs on one end
These 2-pole cables connect to the +1 and -1 pins in an NL2 or NL4 jack. The +1 pin connects to the red locking banana plug. The -1 pin connects to the black locking banana plug.
The plug used on this cable is a two conductor Neutrik NL2 SpeakON™ connector. It is compatible with the four-conductor NL4 jacks on the back of the AHB2 power amplifier. The NL4 jacks provide two additional contacts (+2 and -2) but these extra contacts are only needed for some bi-amp applications. Use this 2-pole cable for stereo and bridged mono applications.
Top-Quality Connectors
In our lab tests we have found that heavy-duty 40-amp SpeakON™ connectors consistently outperform spade lugs, pins, and banana plugs. The SpeakON™ connectors provide a reliable low-impedance connection that can withstand high-currents. Of the more traditional speaker connectors, we have found that locking banana plugs provide the next best connections. In contrast, spade lugs and pins often provide poor connections. Spring-type (non-locking) banana plugs almost always provide poor connections and should be avoided.
The Benchmark AHB2 power amplifier is so clean that poor speaker connections can easily create more distortion than the entire power amplifier. We have seen this many times in the lab. The effects of poor speaker connections can easily be measured when testing the AHB2 power amplifier. We have learned that we cannot accurately measure the AHB2 unless we use SpeakON™ connectors or high-quality locking banana connectors.
SpeakON™ connectors also provide convenience and safety. No speaker connector is easier to use. They cannot short out, and they cannot give you a shock.
Specifications
11 AWG effective wire gauge (pair of 14 AWG conductors)
4-wire Star-Quad Configuration
Polyethylene Dielectric for low capacitance and improved frequency response
DC Resistance < 2.6 Ohms / 1000 ft.
Capacitance: 45 pF / ft.
Diameter: 0.421 in.
Super flexible heavy-duty jacket
Heavy-Duty 40 Amp Locking Neutrik NL2FX Connectors on one end
Heavy Duty Locking Banana Plugs on one end
Q & A
There are currently no questions for this product.
Reviews
There are currently no reviews for this product. Be the first to write one!
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| NL2 to Banana 2-Pole Speaker Cable - 25'/7.6m | 727887 |
