IK Multimedia AXE I/O Solo 2x3 USB Audio/MIDI Interface with Guitar Tone Shaping
Additional Photos:
Product Videos :
AXE I/O, IK's award-winning audio interface, set a new standard for guitar-oriented recording interfaces. Now AXE I/O SOLO brings the same great tone shaping, convenient features and premium sound to everyone, everywhere, in a compact and affordable 2-in / 3-out format.
Your guitar's golden channel
AXE I/O SOLO offers a triple-topology instrument input designed to preserve your guitar's unique character, combined with powerful tone-shaping features to adapt to any guitar or bass, and helps you coax a wider range of sounds from any instrument.
Pick your pickup:
• PASSIVE: designed to accommodate everything from low-output vintage pickups to hotter modern humbuckers with ultra-low noise and extended frequency response.
• ACTIVE: bypasses unnecessary gain stages when using active pick-ups, to keep your signal path as direct, transparent and clean as possible.
Choose your channel:
• PURE: a completely transparent and ultra-accurate preamp circuit that won't colour your sound in any way.
• JFET: a Class A JFET input buffer for subtle harmonic enhancement, midrange focus and warmth.
AXE I/O SOLO also offers IK's patent pending Z-TONE™ circuit, letting you dial in impedance from 1 MOhm ("sharp") down to 2.2 kOhms ("bold") that interacts with your pick-ups. At the maximum impedance, you'll find your sound tighter, sharper and more precise. Increase the load and the sound becomes thicker and bolder.
PURE mic preamp for transparent recording
AXE I/O SOLO offers a high-definition, Class A mic preamp designed for transparent and clean recording. An extended, flat frequency response captures the full tonal range of your voice or instrument without colouring the sound, and best-in-class dynamic range ensures ultra-quiet recordings.
Re-amplification made easier than ever
AXE I/O SOLO offers a dedicated Amp Out, a with ground-isolated design and zero-latency routing, letting you ditch expensive and confusing reamping setups.
It's simple: connect the Amp Out to your amp, then mic it up using AXE I/O SOLO's microphone preamp. Now you can capture a clean copy of your signal while recording and feed it back to your amp afterwards to experiment with different amp, stompbox and microphone settings without re-recording countless takes.
A full-blown analog in-the-box studio - out of the box
AXE I/O SOLO offers a massive bundle of software and plug-ins to unleash your creativity.
The included AmpliTube 4 Deluxe offers over 140 ultra-accurate models of guitar and bass amps, cabs, pedals, mics and more.
10 of IK's best sounding T-RackS 5 processors cover the most popular gear for mixing and mastering full tracks. And Ableton Live 10 Lite gives you a fresh and easy way to write music, record audio and produce your own songs.
Features
• 2-in / 3-out USB audio interface
• ACTIVE/PASSIVE pick-up selector
• PURE and JFET input stages
• Z-Tone™ impedance-adapting circuit
• Amp Out with ground loop interrupter
• High-resolution, Class A mic preamp
• 24-bit, 192 kHz sound quality
• Wide frequency response ideal for instruments
• Best-in-class analog/digital conversion
• Ultra-low noise floor for high-gain recording
System Requirements
Computer: 64-bit application. Requires a 64 bit CPU and Operating System
Mac® (64-bits)
Minimal: macOS 10.11 or later. One free USB port.
Windows® (64-bits)
Minimal: Windows 7 or later. One free USB port.
Specifications
Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz
Power: USB
Device Connection: USB B-Type 2.0
Enclosure: metal sheet
Line Outputs 1-2 (Monitor)
Configuration: Electronically balanced and floating, automatically compensates level when connection is balanced or unbalanced, tip hot.
Output 3 (Amp output)
Configuration: Unbalanced, floating, with selectable ground lift
Headphones Out
Output impedance: Virtually ideal source (zero Ohms) until clipping
Mic Input
Configuration: Class-A discrete differential microphone preamp, pin 2 hot
Line Input
Configuration: Class-A discrete differential line receiver, tip hot
Instrument Input
Configuration: Multiple topology instrument preamp
Input impedance, PASSIVE mode: Variable from 1 MOhms down to 2.2 kOhms
Input impedance, ACTIVE mode: 10 kOhms
Size: 19.5cm x 19.5cm x 5.3cm (7.7" x 7.7" x 2.1")
Weight: 1.0kg (2.2 lb)
Media
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| AXE I/O Solo 2x3 USB Audio/MIDI Interface with Guitar Tone Shaping | 727855 |
