Zoom H4n Pro Handheld Recorder / USB Audio Interface - Limited Edition Red
![H4n Pro Handheld Recorder / USB Audio Interface - Limited Edition Red](https://cdn.long-mcquade.com/files/158364/lg_a4d78768408051da4a52a2dbd3604a3f.webp)
Additional Photos:
![H4n Pro Handheld Recorder / USB Audio Interface - Limited Edition Red](https://cdn.long-mcquade.com/files/158364/md_061cdd4c69763ee1a23a8a39aaa54cfb.webp)
![H4n Pro Handheld Recorder / USB Audio Interface - Limited Edition Red](https://cdn.long-mcquade.com/files/158364/md_10b66330dfa8c3f3035035152a60834a.webp)
Product Videos :
![Zoom H4n Pro Product Video](https://img.youtube.com/vi/bBwPJRD9vh8/hqdefault.jpg)
![Zoom H4n Pro: Updating the Firmware](https://img.youtube.com/vi/QWGp-RZ7nIg/hqdefault.jpg)
The H4n Pro features advanced X/Y microphones, incredibly natural-sounding preamps, and a super-low noise floor. You can record everything from the Indy 500 to the fluttering of a hummingbird with extraordinary realism.
The H4n Pro is packed with features that make it perfect for capturing audio for film. The onboard X/Y microphones deliver spectacular stereo imaging, and two combo input jacks allow you to use your favourite microphones as well. It also includes a headphone/line out jack to easily send high-definition stereo directly to your camera. The Pro features the same high performance, low-noise mic preamps as Zoom's acclaimed Zoom H5 and H6 Handy Recorders, with recording and playback at resolutions up to 24-bit/96 kHz. The improved noise floor (-120 dBu EIN) captures audio at lower volumes with less noise and fewer artifacts.
Now available in limited edition red.
Built-in Stereo Recording
X/Y stereo recording covers a wide area while capturing sound sources in the center with clarity and definition. The angle of its two unidirectional condenser mics can easily be changed from 90 degrees for a tightly focused stereo image to 120 degrees for a wider image simply by twisting the mic capsules.
The H4n Pro provides an onboard MS decoder for Mid-Side recording with external microphones. This allows you to adjust the width of the stereo image, making it especially useful for sound design and broadcasting.
The Pro offers studio-grade effects and emulators to enhance your recordings. Choose from a variety of effects, including compression, limiting, reverb, delay, echo, a low-cut filter, and more.
There's an onboard metronome and tuner, along with dozens of amp models and effects crafted for guitar and bass. Additionally, you can loop playback and adjust pitch and speed independently, making the H4n Pro a perfect tool for phrase training.
Podcasters and Journalists
The H4n Pro provides the essential combination of mic'ing versatility, portability, and superior audio necessary for impactful storytelling. With support for plug-in power, you can use a lavalier to mic up your subject for podcasts or interviews. Record time-stamped WAV files to sync with video footage in post-production, or embed superior audio directly on your video in real-time through a 1/4" stereo feed.
Mobile Studio
With overdubbing and punch-in features, as well as studio-grade instrument effects and emulators, you can create songs from start to finish. The Pro also functions as a 2-input/2-output USB audio interface for PC or Mac. Launch your favorite recording/editing software or use the included Cubase LE to start creating.
Features at a Glance
• Four-track simultaneous recording
• High-fidelity mic preamps
• Built-in X/Y stereo microphones, adjustable between 90 and 120 degrees
• Record up to 140 dB SPL with X/Y microphones
• Two mic/line level inputs with XLR/TRS combo connectors
• Stereo 1/8" Mic In mini phone jack
• +24 or +48V phantom power for main inputs and Plug-in power (2.5V) via Mic/Line In mini phone jack
• Output/headphone jack with dedicated volume control
• Records directly to SD and SDHC cards up to 32 GB
• Supports up to 24-bit/96 kHz audio in BWF-compliant WAV or a variety of MP3 formats
• Built-in effects, including compression/limiting, low-cut filtering, modulation, reverb/delay and amp models
• 2-in/2-out USB audio interface for PC/Mac computers
• Mounts to mic stand or tripod, or directly to DSLR with optional Hot Shoe adapter
• Runs on 2 standard AA alkaline or NiMH rechargeable batteries with up to 6 hours of operation (up to 10 hours in Stamina mode)
What's included with the H4n Pro:
H4n Pro Handy Recorder
USB cable
2 x AA batteries
Protective case
Operation manual
Download license for Steinberg Cubase LE and WaveLab LE software
Specifications:
GENERAL
Number of simultaneous recording tracks: 2 (STEREO mode), 4 (4CH mode), 2 (MTR mode)
Number of simultaneous playback tracks: 2 (STEREO mode), 4 (4CH mode), 4 (MTR mode)
Recording time 4 GB (SDHC):
- Approx. 380 minutes (WAV 44.1 kHz / 16-bit stereo track)
- Approx. 68 hours (MP3 44.1 kHz / 128 kbps stereo track)
*Recording times are approximations. Actual times may differ according to recording conditions.
Maximum file size of simultaneous recording: 2 GB
Projects: 1000/card
Locate function: Hours/Minutes/Seconds/Milliseconds
Other functions: Punch-in/out, Bounce, A-B repeat
Effects modules: 2
- STEREO / 4CH Mode: LO CUT, COMP/LIMITER
- MTR Mode: PRE AMP module, EFX module
Types: 53
Patches: 60
Tuners: Chromatic, Guitar, Bass, Open A/D/E/G, DADGAD
Metronome sound sources: 5
Variable beat: 1/4 - 8/4, 6/8, unaccentuated
Tempo: 40.0 - 250.0 BPM
A/D conversion: 24-bit 128 oversampling
D/A conversion: 24-bit 128 oversampling
Recording media: SD card (16 MB 2 GB), SDHC card (4 GB 32 GB)
Display: 128 x 64 dots Full-dot backlit LCD
DATA TYPE - WAV FORMAT (RECORD/PLAY)
Quantization: 16- / 24-bit
Sampling frequency: 44.1 / 48 / 96 kHz
DATA TYPE - MP3 FORMAT (RECORDING)
Bit rate: 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 kbps, VBR
Sampling frequency: 44.1 kHz
DATA TYPE - MP3 FORMAT (PLAYBACK)
Bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 kbps, VBR
Sampling frequency: 44.1 / 48 kHz
INPUTS
Input [1] [2]: XLR (balanced input) / standard phone (unbalanced input) combo jack
Input impedance:
(Using balanced input) 3 kΩ or more, pin 2 hot
(Using unbalanced input) 470 kΩ or more
Input gain:
(Using balanced input) −16 dB to +43 dB
(Using unbalanced input) -30 dB to +32 dB
Built-in stereo mic: Unidirectional condenser microphone
Sensitivity: -45 dB/1 Pa at 1 kHz
Input gain: -16 dB to +51 dB
Maximum sound pressure input: 140 dB SPL
External mic: Mini stereo phone jack
Input impedance: 2 kΩ or more
Input gain: - 16 dB to +51 dB
OUTPUTS
Line/phone:
LINE Output load impedance: 10 kΩ or more
LINE rated output level: -10 dBu
PHONE: 20 mW + 20 mW (into 32Ω load)
Monaural speaker: 400 mW 8 Ω
Phantom power: 48V, 24V, OFF
USB: USB 2.0 High Speed Mass Storage Class operation, Audio interface operation
(USB functions can be operated by USB bus power)
Power requirements: DC 5V 1A AC from AC adapter (ZOOM AD-14), 2 x AA batteries
Batteries: IEC R6 (size AA) x 2
Continuous recording time:
STEREO mode
- Using built-in mics at 44.1 kHz/16-bit without headphones connected
- About 6 hours using alkaline batteries or about 8 hours using NiMH (2450mAh) batteries
STAMINA mode
- Using built-in mics at 44.1 kHz/16-bit without headphones connected
- About 10 hours using alkaline batteries or about 12 hours using NiMH (2450mAh) batteries
Dimensions: 73 (W) 157.2 (D) 37 (H) mm
Weight: 294 g
*0 dBm = 0.755 Vrms
*Design and specifications subject to change without notice.
Media
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.